Click to zoom
$840$1,000
Clear
Product short description:
  • Non-intelligent VME64x IP carrier
  • Holds four IP modules
  • Rear Access I/O
  • Supports two interrupt channels per IP

The AVME9670 and AVME9675 are non-intelligent slave boards that interface up to four IP modules to the VMEbus.  The only difference is that the AVME9675 adds fully implemented geographical addressing.  Both are full-height (6U) IP carrier cards that use VME64-compliant connectors to increase the quantity of rear I/O connections beyond that of standard VME.

RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

When used with a VME64 backplane, the AVME9670 brings all 200 I/O points out the rear P0 and P2 connectors.  This convenience eliminates messy cables from hanging out the front of the cage.  In addition to a cleaner cage design, it is also much easier to insert and replace boards into the system.

Acromag’s carrier boards provide full data access to the IP module’s I/O, ID and memory spaces.  With full access to the programmable registers, you can easily configure and control the operation of the IP modules from the VMEbus.

Up to two interrupt requests are supported for each IP module.  The VMEbus interrupt level is software programmable.

Individual passive filters on each IP module power supply line provide optimum filtering and isolation between the IP modules and the carrier board.

Performance Specifications

IP Compliance (ANSI/VITA 4)

Meets IP specifications per ANSI/VITA 4-1995 and ANSI/VITA 4.1-1996 for I/O mapping.

Electrical/mechanical interface: Supports single or double size IP modules.

32-bit IP modules are not supported.

I/O space and ID space supported.

Memory space: Supports 1MB to 8MB per IP module.

Interrupts: Supports two interrupt requests per IP module and interrupt acknowledge cycles, D16/D08(O).

VMEbus Compliance

Meets VME64 specifications per ANSI/VITA 1-1994 and VME64x specifications per ANSI/VITA 1.1-1997.

Data transfer bus: A24/A16:D16/D08(EO) DTB slave; supports Read-Modify-Write cycles.

Interrupts: Creates I(1-7) programmable request levels (up to two requests sourced from each IP module). Supports D16/D08(O) round-robin hardware interrupt prioritization of IP sources.  Carrier registers support interrupt control and status monitoring.  Interrupt release mechanism is Release on Register Access (RORA) type.

Physical

Physical Configuration: Length: 9.187 inches (233.3 mm). Width: 6.299 inches (160.0 mm). Board Thickness: 0.062 inches (1.59 mm).

Max Component Height: .0.550 inches (13.97 mm)

Recommended Card Spacing: .0.800 inches, (20.32mm)

Connectors:
P1 & P2 (VME64x bus):.DIN 41612 160-pin Type C, Level II.
P0 (VME64x bus): J3 Type B, Right-Angle Female 95-contacts, withupper ground shield.
P3,5,7,9 (IP Field I/O): 50-pin male plug header (AMP 173280-3 or equivalent).
P4,6,8,10 (IP Logic Interface): .50-pin male plug header (AMP 173280-3 or equivalent).

Environmental

Operating temperature: 0 to 70°C (AVME9670/75) or -40 to 85°C (AVME9670E/75E models).

Storage temperature: -25 to 85°C ( AVME9670/75) or -40 to 85°C (AVME9670E/75E models).

Relative humidity: 5 to 95% non-condensing.

Power +5V (±5%): 525mA maximum. ±12V (±5%):  0mA (not used). Plus IP module load.

MTBF: 474,104 hrs.  at 25°C, MIL-HDBK-217F, notice 2.

  • Four industry-standard IP module slots
  • 200 I/O points with rear access
  • VME64x high-density rear connectors
  • Full geographical addressing (AVME9675 only)
  • Compatibility with most CPUs (VME A24/A16)
  • Two interrupts per IP module
  • Individually filtered and fused power to each IP
  • Front panel LEDs
  • 0 to 70°C (-40 to 85°C E version)

Additional information

Weight N/A
Dimensions N/A
Part Number

AVME9670: VME64 carrier, AVME9670E: VME64 carrier, extended temp. range, AVME9670-2: VME64 carrier, no P0 connectors, AVME9670-2E: VME64 carrier, no P0 connectors, extended temp. range

  • Description

    When used with a VME64 backplane, the AVME9670 brings all 200 I/O points out the rear P0 and P2 connectors.  This convenience eliminates messy cables from hanging out the front of the cage.  In addition to a cleaner cage design, it is also much easier to insert and replace boards into the system.

    Acromag’s carrier boards provide full data access to the IP module’s I/O, ID and memory spaces.  With full access to the programmable registers, you can easily configure and control the operation of the IP modules from the VMEbus.

    Up to two interrupt requests are supported for each IP module.  The VMEbus interrupt level is software programmable.

    Individual passive filters on each IP module power supply line provide optimum filtering and isolation between the IP modules and the carrier board.

    Performance Specifications

    IP Compliance (ANSI/VITA 4)

    Meets IP specifications per ANSI/VITA 4-1995 and ANSI/VITA 4.1-1996 for I/O mapping.

    Electrical/mechanical interface: Supports single or double size IP modules.

    32-bit IP modules are not supported.

    I/O space and ID space supported.

    Memory space: Supports 1MB to 8MB per IP module.

    Interrupts: Supports two interrupt requests per IP module and interrupt acknowledge cycles, D16/D08(O).

    VMEbus Compliance

    Meets VME64 specifications per ANSI/VITA 1-1994 and VME64x specifications per ANSI/VITA 1.1-1997.

    Data transfer bus: A24/A16:D16/D08(EO) DTB slave; supports Read-Modify-Write cycles.

    Interrupts: Creates I(1-7) programmable request levels (up to two requests sourced from each IP module). Supports D16/D08(O) round-robin hardware interrupt prioritization of IP sources.  Carrier registers support interrupt control and status monitoring.  Interrupt release mechanism is Release on Register Access (RORA) type.

    Physical

    Physical Configuration: Length: 9.187 inches (233.3 mm). Width: 6.299 inches (160.0 mm). Board Thickness: 0.062 inches (1.59 mm).

    Max Component Height: .0.550 inches (13.97 mm)

    Recommended Card Spacing: .0.800 inches, (20.32mm)

    Connectors:
    P1 & P2 (VME64x bus):.DIN 41612 160-pin Type C, Level II.
    P0 (VME64x bus): J3 Type B, Right-Angle Female 95-contacts, withupper ground shield.
    P3,5,7,9 (IP Field I/O): 50-pin male plug header (AMP 173280-3 or equivalent).
    P4,6,8,10 (IP Logic Interface): .50-pin male plug header (AMP 173280-3 or equivalent).

    Environmental

    Operating temperature: 0 to 70°C (AVME9670/75) or -40 to 85°C (AVME9670E/75E models).

    Storage temperature: -25 to 85°C ( AVME9670/75) or -40 to 85°C (AVME9670E/75E models).

    Relative humidity: 5 to 95% non-condensing.

    Power +5V (±5%): 525mA maximum. ±12V (±5%):  0mA (not used). Plus IP module load.

    MTBF: 474,104 hrs.  at 25°C, MIL-HDBK-217F, notice 2.

  • Features & Benefits

    • Four industry-standard IP module slots
    • 200 I/O points with rear access
    • VME64x high-density rear connectors
    • Full geographical addressing (AVME9675 only)
    • Compatibility with most CPUs (VME A24/A16)
    • Two interrupts per IP module
    • Individually filtered and fused power to each IP
    • Front panel LEDs
    • 0 to 70°C (-40 to 85°C E version)
  • Specs & Data Sheets

  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    AVME9670: VME64 carrier, AVME9670E: VME64 carrier, extended temp. range, AVME9670-2: VME64 carrier, no P0 connectors, AVME9670-2E: VME64 carrier, no P0 connectors, extended temp. range