Click to zoom
$835
Clear
Product short description:
  • Non-intelligent VME IP carrier
  • Holds four IP modules
  • Front panel SCSI-2 connectors
  • Supports 8MHz and 32MHz IP clocks
  • Supports two interrupt channels per IP
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

The AVME9668 is a non-intelligent slave board that interfaces IP modules to the VMEbus. The full-height (6U) board holds four IP modules. All field I/O connections are made through the front panel of the carrier board.

This carrier card is ready for rugged, high-performance applications. The front-panel SCSI-2 ports provide screw-down connections to hold cables securely. And with support for 8MHz and 32MHz clocks, you can process data at very high speeds.

Acromag’s carrier boards provide full data access to the IP module’s I/O, ID and memory spaces.  With full access to the programmable registers, you can easily configure and control the operation of the IP modules from the VMEbus.

Up to two interrupt requests are supported for each IP module. The VMEbus interrupt level is software programmable.

Individual passive filters and fuses on each IP module power supply line provide optimum filtering between the IP modules and the carrier board.

Performance Specifications

IP Compliance (ANSI/VITA 4)

Meets IP specifications per ANSI/VITA 4-1995.
Electrical/mechanical interface:
  Supports single or double size IP modules. 32-bit IP modules are not supported. I/O space and ID space supported.
Memory space: Supports 1MB to 8MB per IP module.8 and 32MHz IP modules are supported.
Interrupts: Supports two interrupt requests per IP module and interrupt acknowledge cycles, D16/D08(O).

VMEbus Compliance

Meets VME specifications per revision C.1 dated October 1985, IEC 821-1987 and IEEE 1014-1987.
Data transfer bus: A24/A16:D16/D08(EO) DTB slave; supports Read-Modify-Write cycle
Interrupts: Creates I(1-7) programmable request levels (up to two requests sourced from each IP module).  D16/D08(O) interrupter (interrupt vectors come from IP modules). Carrier registers are for control and status monitoring. Interrupt release mechanism is Release on Register Access (RORA) type.

Physical

Physical Configuration: Length: 9.187 inches (233.3 mm). Width: 6.299 inches (160.0 mm). Board Thickness: 0.062 inches (1.59 mm).
Connectors:
P1, 2 (VMEbus): DIN 41612 96-pin Type C, Level II. P2 has no connections
A-D (Carrier field I/O): 50-pin female SCSI-2 connectors.
P3, 5, 7, 9 (IP field I/O): 50-pin male plug header (AMP 173280-3 or equivalent)
P4, 6, 8 10 (IP logic interface): 50-pin male plug header (AMP 173280-3 or equivalent).

Environmental

Operating temperature: 0 to 70°C (AVME9668) or -40 to 85°C (AVME9668E models).
Storage temperature: -25 to 85°C (AVME9668) or -40 to 85°C (AVME9668E models).
Relative humidity: 5 to 95% non-condensing.
Power: +5V (±5%): Consult factory. ±12V (±5%):  0mA (not used). Plus IP module load.
MTBF: 2,602,547 hrs at 25°C, MIL-HDBK-21F, Notice 2.

  • 6U VMEbus card holds four IP modules
  • Industry-standard IP module interface
  • Front panel SCSI-2 connectors for field I/O signals
  • Supports two interrupt channels per IP
  • Provides individually fused and filtered +5V, +12V, and -12V DC power lines to each IP module
  • Accepts other manufacturers’ IP modules
  • Accommodates 8MHz and 32MHz IP clocks
  • 0 to 70°C (-40 to 85°C E version)
IPSW-API-LNX (Log in to download the file)
  • Compare

    502x Cable Series

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    $40$600
    Select options
  • Compare

    IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

    • Use with IndustryPack modules/carriers
    • Easy installation procedure
    • Help files with step-by-step instructions
    • Demonstration Program
    • Driver level support for desktop and embedded Windows level programming environments
    $365$1,005
    Read more
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    $165$210
    Select options

Additional information

Weight N/A
Part Number

5025-288: SCSI-3 cable connection to 68 screw terminals, 5028-378: SCSI-2 cable connection to 50 screw terminals, 5025-552: 50 screw terminals, ribbon cable connector

  • Description

    Screw terminal panels simplify field signal wiring. A cable connector provides a clean interface to the I/O board or module.

    Many termination panels have a compact footprint and mount neatly on a DIN rail strip. Other panels are designed for mounting directly onto a standard 19-inch computer rack.

    All of Acromag’s I/O boards have a corresponding termination panel. This convenience saves you the time and hassle of finding a compatible panel or crafting your own.

    For more information see modules user manual.

  • Features & Benefits

    • 6U VMEbus card holds four IP modules
    • Industry-standard IP module interface
    • Front panel SCSI-2 connectors for field I/O signals
    • Supports two interrupt channels per IP
    • Provides individually fused and filtered +5V, +12V, and -12V DC power lines to each IP module
    • Accepts other manufacturers’ IP modules
    • Accommodates 8MHz and 32MHz IP clocks
    • 0 to 70°C (-40 to 85°C E version)
  • Specs & Data Sheets

  • Software

    IPSW-API-LNX (Log in to download the file)
  • Accessories

    • Compare

      502x Cable Series

      • Communication Signal Cables
      • Wide assortment of ribbon cables
      $40$600
      Select options
    • Compare

      IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

      • Use with IndustryPack modules/carriers
      • Easy installation procedure
      • Help files with step-by-step instructions
      • Demonstration Program
      • Driver level support for desktop and embedded Windows level programming environments
      $365$1,005
      Read more
    • Compare

      Termination Products

      • DIN rail-mount panels
      • 50 screw terminals on 50-pin connector termination panels
      • 50 screw terminals on SCSI-2 connector termination panels
      • 68 screw terminals on SCSI-3 connector termination panels
      $165$210
      Select options
  • Additional information

    Additional information

    Weight N/A
    Part Number

    5025-288: SCSI-3 cable connection to 68 screw terminals, 5028-378: SCSI-2 cable connection to 50 screw terminals, 5025-552: 50 screw terminals, ribbon cable connector