Click to zoom
$1,050$1,170
Clear
Product short description:
  • Non-intelligent VME IP carrier
  • Holds four IP modules
  • 50-pin front panel header connectors
  • Supports two interrupt channels per IP
  • Standard IP module interface
RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

The AVME9660A is a non-intelligent slave board that interfaces Industry Pack (IP) modules to the VMEbus. The full-height (6U) board holds four IP modules. All field I/O connections are made to the carrier board.

Acromag’s carrier boards provide full data access to the IP module’s I/O, ID and memory spaces. With full access to the programmable registers, you can easily configure and control the operation of the IP modules from the VMEbus.

Up to two interrupt requests are supported for each IP module. The VMEbus interrupt level is software programmable.

Individual passive filters on each IP module power supply line provide optimum filtering and power isolation between the IP modules and the carrier board.

The AVME9660A is designed as a fit, form and functional replacement of the AVME9660.

Known differences between the AVME9660 and AVME9660A.

Performance Specifications

IP Compliance (ANSI/VITA 4)

Meets IP specifications per ANSI/VITA 4-1995.

Electrical/mechanical interface: Supports single or double size IP modules. 32-bit IP modules are not supported.

I/O space and ID space supported.

Memory space: Supports 1MB to 8MB per IP module.

Interrupts: Supports two interrupt requests per IP module & interrupt acknowledge cycles, D16/D08(O).

VMEbus Compliance

Meets VME specifications per revision C.1 dated October 1985, IEC 821-1987 and IEEE 1014-1987.

Data transfer bus: A24/A16:D16/D08(EO) DTB slave; supports Read-Modify-Write cycles.

Interrupts: Creates I(1-7) programmable request levels (up to two requests sourced from each IP module).  D16/D08(O) interrupter (interrupt vectors come from IP modules). Carrier registers are for control and status monitoring. Interrupt release mechanism is Release on Register Access (RORA) type.

Physical

Physical Configuration: Length: 9.187 inches (233.3 mm). Width: 6.299 inches (160.0 mm).

Board Thickness: 0.062 inches (1.59 mm).

Max Component Height: 0.550 in. (13.97 mm)

Recommended Card Spacing: 0.800 inches (20.32mm)

Connectors

P1 (VMEbus): DIN 41612 96-pin Type C, Level II

P2 (VMEbus): Not Used.

A-D (Carrier Field I/O): 50-pin Male Header x2 stacked “condo type” 3M 3433-D303 with ejector latches

Environmental

Operating temperature: 0 to 70°C (AVME9660A-LF) or -40 to 85°C (AVME9660AE-LF models).

Storage temperature: -55 to 100°C.

Relative humidity: 5 to 95% non-condensing.

Power: +5V (±5%):  0.233A typical, 0.275A maximum. ±12V (±5%):  0mA (not used). Plus IP module load.

MTBF: Contact the factory

  • 6U VMEbus card holds four IP modules
  • Industry-standard IP module interface
  • Front panel connectors for field I/O signals
  • Supports two interrupt channels per IP
  • Provides individually isolated and filtered +5V, +12V, and -12V DC power lines to each IP module
  • Accepts other manufacturers’ IP modules
  • Locking front panel connectors
  • 0 to 70°C (AVME9660A-LF) or -40 to 85°C (AVME9660AE-LF)

Manuals

AVME9660A User Manual (Log in to download the file)

Known Differences between the AVME9660A and the retired AVME9660 (Log in to download the file)

Drawings & Diagrams

Additional information

Weight N/A
Dimensions N/A
Part Number

AVME9660A-LF: VMEbus 6U carrier board, AVME9660AE-LF: VMEbus 6U carrier board, extended temp. range

  • Description

    The AVME9660A is a non-intelligent slave board that interfaces Industry Pack (IP) modules to the VMEbus. The full-height (6U) board holds four IP modules. All field I/O connections are made to the carrier board.

    Acromag’s carrier boards provide full data access to the IP module’s I/O, ID and memory spaces. With full access to the programmable registers, you can easily configure and control the operation of the IP modules from the VMEbus.

    Up to two interrupt requests are supported for each IP module. The VMEbus interrupt level is software programmable.

    Individual passive filters on each IP module power supply line provide optimum filtering and power isolation between the IP modules and the carrier board.

    The AVME9660A is designed as a fit, form and functional replacement of the AVME9660.

    Known differences between the AVME9660 and AVME9660A.

    Performance Specifications

    IP Compliance (ANSI/VITA 4)

    Meets IP specifications per ANSI/VITA 4-1995.

    Electrical/mechanical interface: Supports single or double size IP modules. 32-bit IP modules are not supported.

    I/O space and ID space supported.

    Memory space: Supports 1MB to 8MB per IP module.

    Interrupts: Supports two interrupt requests per IP module & interrupt acknowledge cycles, D16/D08(O).

    VMEbus Compliance

    Meets VME specifications per revision C.1 dated October 1985, IEC 821-1987 and IEEE 1014-1987.

    Data transfer bus: A24/A16:D16/D08(EO) DTB slave; supports Read-Modify-Write cycles.

    Interrupts: Creates I(1-7) programmable request levels (up to two requests sourced from each IP module).  D16/D08(O) interrupter (interrupt vectors come from IP modules). Carrier registers are for control and status monitoring. Interrupt release mechanism is Release on Register Access (RORA) type.

    Physical

    Physical Configuration: Length: 9.187 inches (233.3 mm). Width: 6.299 inches (160.0 mm).

    Board Thickness: 0.062 inches (1.59 mm).

    Max Component Height: 0.550 in. (13.97 mm)

    Recommended Card Spacing: 0.800 inches (20.32mm)

    Connectors

    P1 (VMEbus): DIN 41612 96-pin Type C, Level II

    P2 (VMEbus): Not Used.

    A-D (Carrier Field I/O): 50-pin Male Header x2 stacked “condo type” 3M 3433-D303 with ejector latches

    Environmental

    Operating temperature: 0 to 70°C (AVME9660A-LF) or -40 to 85°C (AVME9660AE-LF models).

    Storage temperature: -55 to 100°C.

    Relative humidity: 5 to 95% non-condensing.

    Power: +5V (±5%):  0.233A typical, 0.275A maximum. ±12V (±5%):  0mA (not used). Plus IP module load.

    MTBF: Contact the factory

  • Features & Benefits

    • 6U VMEbus card holds four IP modules
    • Industry-standard IP module interface
    • Front panel connectors for field I/O signals
    • Supports two interrupt channels per IP
    • Provides individually isolated and filtered +5V, +12V, and -12V DC power lines to each IP module
    • Accepts other manufacturers’ IP modules
    • Locking front panel connectors
    • 0 to 70°C (AVME9660A-LF) or -40 to 85°C (AVME9660AE-LF)
  • Specs & Data Sheets

    Manuals

    AVME9660A User Manual (Log in to download the file)

    Known Differences between the AVME9660A and the retired AVME9660 (Log in to download the file)

    Drawings & Diagrams

  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    AVME9660A-LF: VMEbus 6U carrier board, AVME9660AE-LF: VMEbus 6U carrier board, extended temp. range