Click to zoom
$900$1,050
Clear
Product short description:
  • Non-intelligent PCIe bus carrier
  • Holds four IP modules

This board interfaces standard Industry Pack (IP) mezzanine modules to a PCI Express bus on a PC-based computer system.

RSS
FACEBOOK
FACEBOOK
TWITTER
Visit Us
LINKEDIN

Four IP module slots give you the freedom to mix a variety of I/O functions (A/D, D/A, digital in, digital out, serial I/O, etc.) on a single board. Or, combine modules of the same type for hundreds of channels on a single card. Either way, the APCe8650 saves your precious card slots and reduces your costs.

Select I/O modules from Acromag’s offering of more than forty models or use any third-party ANSI/VITA 4 compliant IP modules.

The APCe8650 card is a Peripheral Component Interconnect Express (PCIe) bus card and is a carrier for the Industrial I/O Pack (IP) mezzanine board field I/O modules. The carrier board provides a modular approach to system assembly, since each carrier can be populated with any combination of analog input/output, digital input/output, communication, etc. IP modules. Thus, the user can create a board which is customized to the application. This saves money and space – a single carrier board populated with IP modules may replace several dedicated function PCI or PCIe bus boards. The APCe8650 non-intelligent carrier board provides impressive functionality at low cost.

Performance Specifications

IP Module Compliance: Meets or exceeds all written IP specifications per ANSI/VITA 4-1995 for 8MHz or 32MHz operation.Supports Type I and Type II ID space formats.

Electrical/mechanical interface: Supports four single-size IP modules (A-D).

IP module I/O space, ID space, INT, and MEM space supported.

IP module I/O space: 16 and 8-bit; supports 128 byte values per IP module.

IP module ID space: 16 and 8-bit; Supports Type I 32 bytes per IP (consecutive even byte addresses) and Type II 32 words per IP via D16 data transfers.

IP module memory space: 16 and 8-bit; supports up to 8M bytes of memory space per IP module.

Interrupts: Supports two interrupt requests per IP and interrupt acknowledge cycles via access to IP INT space.

PCI Express Bus Compliance

This device meets or exceeds all written PCI local bus specifications per rev. 1.1 dated March 28, 2005.

System base address: This board operates in PCI memory space. It requires 256 bytes for mapping the PCI configuration registers and 64M bytes for IP module ID, IO, INT and memory space.

Data transfer bus: Slave with 32, 16, and 8-bit data transfer operation. 32-bit read or write accesses implemented as two 16-bit transfers to IP modules.

Interrupts (PCI bus INTA# interrupt signal): Up to two requests sourced from each IP mapped to INTA#. Interrupt vectors come from IP modules via access to IP module INT space.

Physical

Physical Configuration
PCIe x1 lane
Length: 12.283 inches (312.0 mm)
Height: 4.380 inches (111.25 mm)
Board thickness: 0.062 inches (1.59 mm)
Max. height under IP modules: 0.110 in. (2.80 mm).

Connectors
A-D (carrier field I/O): 50-pin male header.
Power: Auxilliary 12V power.

Environmental

Operating temperature: 0 to 70°C (APCe8650) or -40 to 85°C (APCe8650E model).

Storage temperature: -55 to 100°C.

Relative humidity: 5 to 95% non-condensing.

Power:
3.3 Volts (±10%): 190mA, typical; 220mA max.
12 Volts (±5%): 130mA, typical; 150mA max.

All IP module power is derived from the 12V power supply. 5V, 12V, and –12V are supplied to IP modules. The 12V power can be supplied from the PCIe bus or optionally from either of two auxiliary power connectors.

 

  • Four IP module slots (ANSI/VITA 4 mezzanine)
  • Support any combination of I/O functions
  • Board resides in memory space
  • Supports IP module I/O, ID, INT, and MEM spaces
  • Plug-and-play carrier configuration and interrupt (MSI and INTA#) support
  • Two interrupt channels per IP module
  • Supervisory circuit reset generation
  • Individually filtered and fused power
  • Full IP module register and data access for convenient configuration or control of the I/O modules through software
  • Software development tools for VxWorks, Linux, and Windows environments

Additional information

Weight N/A
Dimensions N/A
Part Number

APCe8650: holds 4 IP modules, APCe8650E: holds 4 IP modules, extended temp.

Communication
Configuration
FPGA Type
Logic Cells
Power
Product Series
  • Description

    Four IP module slots give you the freedom to mix a variety of I/O functions (A/D, D/A, digital in, digital out, serial I/O, etc.) on a single board. Or, combine modules of the same type for hundreds of channels on a single card. Either way, the APCe8650 saves your precious card slots and reduces your costs.

    Select I/O modules from Acromag’s offering of more than forty models or use any third-party ANSI/VITA 4 compliant IP modules.

    The APCe8650 card is a Peripheral Component Interconnect Express (PCIe) bus card and is a carrier for the Industrial I/O Pack (IP) mezzanine board field I/O modules. The carrier board provides a modular approach to system assembly, since each carrier can be populated with any combination of analog input/output, digital input/output, communication, etc. IP modules. Thus, the user can create a board which is customized to the application. This saves money and space – a single carrier board populated with IP modules may replace several dedicated function PCI or PCIe bus boards. The APCe8650 non-intelligent carrier board provides impressive functionality at low cost.

    Performance Specifications

    IP Module Compliance: Meets or exceeds all written IP specifications per ANSI/VITA 4-1995 for 8MHz or 32MHz operation.Supports Type I and Type II ID space formats.

    Electrical/mechanical interface: Supports four single-size IP modules (A-D).

    IP module I/O space, ID space, INT, and MEM space supported.

    IP module I/O space: 16 and 8-bit; supports 128 byte values per IP module.

    IP module ID space: 16 and 8-bit; Supports Type I 32 bytes per IP (consecutive even byte addresses) and Type II 32 words per IP via D16 data transfers.

    IP module memory space: 16 and 8-bit; supports up to 8M bytes of memory space per IP module.

    Interrupts: Supports two interrupt requests per IP and interrupt acknowledge cycles via access to IP INT space.

    PCI Express Bus Compliance

    This device meets or exceeds all written PCI local bus specifications per rev. 1.1 dated March 28, 2005.

    System base address: This board operates in PCI memory space. It requires 256 bytes for mapping the PCI configuration registers and 64M bytes for IP module ID, IO, INT and memory space.

    Data transfer bus: Slave with 32, 16, and 8-bit data transfer operation. 32-bit read or write accesses implemented as two 16-bit transfers to IP modules.

    Interrupts (PCI bus INTA# interrupt signal): Up to two requests sourced from each IP mapped to INTA#. Interrupt vectors come from IP modules via access to IP module INT space.

    Physical

    Physical Configuration
    PCIe x1 lane
    Length: 12.283 inches (312.0 mm)
    Height: 4.380 inches (111.25 mm)
    Board thickness: 0.062 inches (1.59 mm)
    Max. height under IP modules: 0.110 in. (2.80 mm).

    Connectors
    A-D (carrier field I/O): 50-pin male header.
    Power: Auxilliary 12V power.

    Environmental

    Operating temperature: 0 to 70°C (APCe8650) or -40 to 85°C (APCe8650E model).

    Storage temperature: -55 to 100°C.

    Relative humidity: 5 to 95% non-condensing.

    Power:
    3.3 Volts (±10%): 190mA, typical; 220mA max.
    12 Volts (±5%): 130mA, typical; 150mA max.

    All IP module power is derived from the 12V power supply. 5V, 12V, and –12V are supplied to IP modules. The 12V power can be supplied from the PCIe bus or optionally from either of two auxiliary power connectors.

     

  • Features & Benefits

    • Four IP module slots (ANSI/VITA 4 mezzanine)
    • Support any combination of I/O functions
    • Board resides in memory space
    • Supports IP module I/O, ID, INT, and MEM spaces
    • Plug-and-play carrier configuration and interrupt (MSI and INTA#) support
    • Two interrupt channels per IP module
    • Supervisory circuit reset generation
    • Individually filtered and fused power
    • Full IP module register and data access for convenient configuration or control of the I/O modules through software
    • Software development tools for VxWorks, Linux, and Windows environments
  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    APCe8650: holds 4 IP modules, APCe8650E: holds 4 IP modules, extended temp.

    Communication
    Configuration
    FPGA Type
    Logic Cells
    Power
    Product Series