APC-PMC: Non-intelligent PMC Carrier Card
Product short description:
- Half-length PCI card
- Holds one PMC card
- 32-bit 66 MHz PCI interface
This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard PCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the PCI card slot edge connector. All Acromag PMC modules and those from other vendors are supported.
Specifications
Environmental
Operating temperature: -40 to 85°C.
Storage temperature: –55 to 100°C.
Relative humidity: 5-95% non-condensing
MTBF: 3,526,342 hrs. at 25°C, MIL-HDBK-217F, notice 2.
Physical
Physical configuration: PCI Card
Length: 6.600 inches (167.64 mm)
Height: 4.200 inches (106.68 mm)
Board thickness: 0.062 inches (1.59 mm)
Maximum component height: 0.380 in. (9.65 mm)
Max. height under IP modules: 0.180 in. (4.57 mm).
Rear connector (carrier field I/O): 64-pin male header
PCI Bus Compliance
The carrier card may compromise signal integrity at 66 MHz (due to longer trace lengths).
- Half-length PCI card
- Holds one PMC card
- 32-bit 66 MHz; PCI Interface
- Front or rear connection I/O access
- Supports both 5V and 3.3V signalling
Manuals
APC-PMC User Manual (Log in to download the file)
Catalogs
-
502x Cable Series
- Communication Signal Cables
- Wide assortment of ribbon cables
$40 – $600Select options
Additional information
| Weight | 16 oz |
|---|---|
| Dimensions | 5 × 2 × 2 in |
| Part Number | 5025-550x: 50-pin female to 50-pin female cable, 12 ft max., 5025-550-4: 50-pin female to 50-pin female cable, 4 ft., 5025-550-7: 5025-550-4: 50-pin female to 50-pin female cable, 7 ft, 5025-550-10: 5025-550-4: 50-pin female to 50-pin female cable, 10 ft, 5028-372: SCSI-2 to CHAMP 0.8mm, 5028-420: VHDCI 68-pin to SCSI-3 MD68, 5028-609: 68-pin VHDCI to four male DSUB-9 connectors, 5028-615: 68-pin CHAMP to pigtail, 36", 5028-616: 68-pin CHAMP to pigtail, 70", 5028-619: 50-pin CHAMP to pigtail, 36", 5028-620: 50-pin CHAMP to pigtail, 70", 5028-568: RJ Point 5 Male to RJ45 Female, 5028-572: 26-pin to 2 USB, VGA, Serial, 5028-187: Shielded, SCSI-2 to flat 50-pin connector, 5028-432: SCSI-3 68-pin connectors at both ends, 5028-438: SCSI-2 50-pin connector at both ends, 5028-449: SFP-to-SFP (male-male) connectors, 5028-564: development cable for VPX4812, 5025-913: SCSI cable with PCI bracket-mounted HD68 female connector, 5025-917: high speed twinax cable for board-to-board connections, 5025-921: VHDCI 36-pin to SCSI-2, 5028-570: SCSI II connectors, for IP571/IP572 when installed on AVME9668, 5028-617: Audio cable, 5028-618: Serial COM cable, 5028-628: ACEX4041 Cable shutdown |
-
Description
Communication Signal Cables
Acromag provides a large selection of signal cables to complete the connection of the field wiring on the termination panel to the I/O board. We offer you a wide assortment of ribbon cables to accommodate the various pin and connector configurations.
5028-420: Round cable, shielded, male SCSI-3 connecor to 68-pin CHAMP 0.8mm, 2 meters long.
5028-432: Round cable, shielded, 6 ft. long, SCSI-3 68-pin connectors at both ends.
5028-438: Round cable, shielded, 6 ft. long, SCSI-2 50-pin connector at both ends.
5028-564: VPX4812 6″ JTAG development cable.
5028-615: Cable, 68-pin CHAMP to pigtail, 36 inches long.
5028-616: Cable, 68-pin CHAMP to pigtail, 70 inches long.
5028-617: Audio cable.
5028-618: Serial COM cable.
5028-629: ACEX4041 Cable shutdown
5025-913: CS Electronics internal SCSI cable with PCI bracket-mounted HD68 female connector. Brings the XMC J14 rear I/O signals to back panel of the PC. Use with APCe8670 and APCe8675 carrier cards.
5025-917: Samtec Q Pairs® high speed twinax cable for board-to-board connections. 3 inches long, 20 differential pairs. Connects carrier cards in adjacent slots between P2 or P3 connectors. High-speed serial signals originate from XMC J16 rear I/O. Use with APCe8675 carrier card.
5025-921: Cable: VHDCI 36-pin to SCSI-2, 6 feet. Use with XMC-6VLX240F and XMC-6VLX365F.
-
Features & Benefits
- Half-length PCI card
- Holds one PMC card
- 32-bit 66 MHz; PCI Interface
- Front or rear connection I/O access
- Supports both 5V and 3.3V signalling
-
Specs & Data Sheets
Manuals
APC-PMC User Manual (Log in to download the file)
Catalogs
-
Accessories
-
502x Cable Series
- Communication Signal Cables
- Wide assortment of ribbon cables
$40 – $600Select options
-
-
Additional information
Additional information
Weight 16 oz Dimensions 5 × 2 × 2 in Part Number 5025-550x: 50-pin female to 50-pin female cable, 12 ft max., 5025-550-4: 50-pin female to 50-pin female cable, 4 ft., 5025-550-7: 5025-550-4: 50-pin female to 50-pin female cable, 7 ft, 5025-550-10: 5025-550-4: 50-pin female to 50-pin female cable, 10 ft, 5028-372: SCSI-2 to CHAMP 0.8mm, 5028-420: VHDCI 68-pin to SCSI-3 MD68, 5028-609: 68-pin VHDCI to four male DSUB-9 connectors, 5028-615: 68-pin CHAMP to pigtail, 36", 5028-616: 68-pin CHAMP to pigtail, 70", 5028-619: 50-pin CHAMP to pigtail, 36", 5028-620: 50-pin CHAMP to pigtail, 70", 5028-568: RJ Point 5 Male to RJ45 Female, 5028-572: 26-pin to 2 USB, VGA, Serial, 5028-187: Shielded, SCSI-2 to flat 50-pin connector, 5028-432: SCSI-3 68-pin connectors at both ends, 5028-438: SCSI-2 50-pin connector at both ends, 5028-449: SFP-to-SFP (male-male) connectors, 5028-564: development cable for VPX4812, 5025-913: SCSI cable with PCI bracket-mounted HD68 female connector, 5025-917: high speed twinax cable for board-to-board connections, 5025-921: VHDCI 36-pin to SCSI-2, 5028-570: SCSI II connectors, for IP571/IP572 when installed on AVME9668, 5028-617: Audio cable, 5028-618: Serial COM cable, 5028-628: ACEX4041 Cable shutdown
Please login to submit this form.