Click to zoom

Please sign in or register to see model options and to add products to your cart.

Product short description:
  • Two PMC module slots
  • Front or rear access I/O
  • Plug-and-play carrier configuration and interrupt support

This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard 6U CompactPCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the CompactPCI card slot edge connector. All Acromag PMC modules and those from other vendors are supported.

This board uses a PLX Technology PCI6540 transparent PCI/PCI bridge for data transactions from the PCI bus (system host) to two PMC sites. The bridge device provides a 32 or 64-bit PCI interface with 33 or 66MHz bus frequencies.

Front and rear-panel access to field I/O signals are accommodated. The carrier card’s front panel cut-out provides access to a PMC module’s front I/O connector. Alternatively, all I/O signals can be routed through the carrier card’s rear J3 and J5 connectors.

An air-cooled rear transition board, Acromag Model TRANS-C4620, maps the field I/O on the PMC module to the rear of the CompactPCI system.

Specifications

Environmental

Operating temperature: -40 to 85°C.
Storage temperature: -55 to 100°C.
Relative humidity: 5-95% non-condensing
Power (received from the CompactPCI 3U Back Plane):
3.3V DC (±5%)*: 135mA typical, 150mA max.
5.0V DC (±5%)*: 50mA typical, 70mA max.
±12V DC (±5%)**: Per PMC module.
* With no PMC module installed, ±12V DC not used.
** Max. power 7.5W (total all supplies) per PMC standard.
MTBF: Call factory

Physical: CompactPCI Carrier Card

Physical configuration: 6U CompactPCI Card 233.35 x 160mm.
Rear CompactPCI connectors: 2mm J1, J2, J3, J5 connectors.
PMC connectors: Eight 1mm connectors.
The air-cooled model (AcPC4620E) uses the standard front panel assembly with a PMC bezel cutout.

Physical: Transition Module

Physical configuration: Half-length 6U CompactPCI Card 233.35 x 80mm.
Connectors: 2mm RJ2 connector which maps the rear I/O signals to a SCSI-3 connector. This model also uses a standard rear front panel assembly with a SCSI-3 connector cutout.

PMC and CompactPCI bus Compliance

Meets PCI specification version 2.3, CompactPCI specification: PICMG 2.3 R1.0, and PMC specification P1386.1.
Data transfer bus: Slave with 32-bit, 16-bit, and 8-bit data transfer operation.
Interrupts: CompactPCI bus INTA# interrupt signal.
PCI Interface: PLX Technology PCI6540 transparent PCI/PCI bridge for data transactions from the PCI bus (system host) to the PMC site. The bridge device provides a 32-bit 33/66 MHz PCI interface

  • 6U CompactPCI card
  • Holds two PMC cards
  • 32 or 64-bit PCI Interface at 33 or 66 MHz
  • Transparent PCI/PCI bridge for data transactions from the PCI bus to PMC module
  • Rear connection I/O access
  • Supports both 5V and 3.3V signalling
  • -40 to 85°C

Manuals

AcPC4620E User Manual (Includes TRANS-C4620 specifications) (Log in to download the file)

  • Compare

    Embedded Cables

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    Select options
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    Select options
  • Compare

    Transition Modules

    • Various transition modules
    Select options

Additional information

Weight N/A
Dimensions N/A
Part Number

AcPC4620E: CompactPCI bus carrier card

  • Description

    This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard 6U CompactPCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the CompactPCI card slot edge connector. All Acromag PMC modules and those from other vendors are supported.

    This board uses a PLX Technology PCI6540 transparent PCI/PCI bridge for data transactions from the PCI bus (system host) to two PMC sites. The bridge device provides a 32 or 64-bit PCI interface with 33 or 66MHz bus frequencies.

    Front and rear-panel access to field I/O signals are accommodated. The carrier card’s front panel cut-out provides access to a PMC module’s front I/O connector. Alternatively, all I/O signals can be routed through the carrier card’s rear J3 and J5 connectors.

    An air-cooled rear transition board, Acromag Model TRANS-C4620, maps the field I/O on the PMC module to the rear of the CompactPCI system.

    Specifications

    Environmental

    Operating temperature: -40 to 85°C.
    Storage temperature: -55 to 100°C.
    Relative humidity: 5-95% non-condensing
    Power (received from the CompactPCI 3U Back Plane):
    3.3V DC (±5%)*: 135mA typical, 150mA max.
    5.0V DC (±5%)*: 50mA typical, 70mA max.
    ±12V DC (±5%)**: Per PMC module.
    * With no PMC module installed, ±12V DC not used.
    ** Max. power 7.5W (total all supplies) per PMC standard.
    MTBF: Call factory

    Physical: CompactPCI Carrier Card

    Physical configuration: 6U CompactPCI Card 233.35 x 160mm.
    Rear CompactPCI connectors: 2mm J1, J2, J3, J5 connectors.
    PMC connectors: Eight 1mm connectors.
    The air-cooled model (AcPC4620E) uses the standard front panel assembly with a PMC bezel cutout.

    Physical: Transition Module

    Physical configuration: Half-length 6U CompactPCI Card 233.35 x 80mm.
    Connectors: 2mm RJ2 connector which maps the rear I/O signals to a SCSI-3 connector. This model also uses a standard rear front panel assembly with a SCSI-3 connector cutout.

    PMC and CompactPCI bus Compliance

    Meets PCI specification version 2.3, CompactPCI specification: PICMG 2.3 R1.0, and PMC specification P1386.1.
    Data transfer bus: Slave with 32-bit, 16-bit, and 8-bit data transfer operation.
    Interrupts: CompactPCI bus INTA# interrupt signal.
    PCI Interface: PLX Technology PCI6540 transparent PCI/PCI bridge for data transactions from the PCI bus (system host) to the PMC site. The bridge device provides a 32-bit 33/66 MHz PCI interface

  • Features & Benefits

    • 6U CompactPCI card
    • Holds two PMC cards
    • 32 or 64-bit PCI Interface at 33 or 66 MHz
    • Transparent PCI/PCI bridge for data transactions from the PCI bus to PMC module
    • Rear connection I/O access
    • Supports both 5V and 3.3V signalling
    • -40 to 85°C
  • Specs & Data Sheets

    Manuals

    AcPC4620E User Manual (Includes TRANS-C4620 specifications) (Log in to download the file)

  • Accessories

    • Compare

      Embedded Cables

      • Communication Signal Cables
      • Wide assortment of ribbon cables
      Select options
    • Compare

      Termination Products

      • DIN rail-mount panels
      • 50 screw terminals on 50-pin connector termination panels
      • 50 screw terminals on SCSI-2 connector termination panels
      • 68 screw terminals on SCSI-3 connector termination panels
      Select options
    • Compare

      Transition Modules

      • Various transition modules
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    AcPC4620E: CompactPCI bus carrier card