Click to zoom

Please sign in or register to see model options and to add products to your cart.

Product short description:
  • Two IP module slots
  • Front access I/O
  • Plug-and-play carrier configuration and interrupt support

The AcPC8630A is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.

 

AcPC8630A: Nonintelligent 3U cPCI IP Carrier with Front I/O Description

The AcPC8630A is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus. All 100 I/O points are brought out the front connectors for easy cable access.

Performance Specifications

General

Acromag’s carrier boards provide full data access to the IP module’s I/O, ID, interrupt and memory spaces. With full access to the IP module’s programmable registers, you can easily configure and control their operation from the CompactPCI bus.

Up to two interrupt requests are supported for each IP module. All board interrupts are mapped to PCI bus INTA# signal.

Individual passive filters on each IP power supply line provide optimum filtering and noise isolation between the IP modules and the carrier board.

IP Compliance (ANSI/VITA 4)

Meets IP specs per ANSI/VITA 4-1995 (8MHz and 32 MHz operation) and IP I/O mapping to the front panel.
Electrical/mechanical interface Supports single or double size IP modules.
IP Module I/O space, ID space, INT, and MEM space supported.

Interrupts: Supports two interrupt requests per IP module and interrupt acknowledge cycles via access to IP INT space.

CompactPCI bus Compliance

Meets PCI specification: V2.1 and PICMG 2.0, R2.1.

Data transfer bus: Slave with 32-bit, 16-bit, and 8-bit data transfer operation. 32-bit read/write accesses are implemented as two 16-bit transfers to the IPs.

Interrupts: CompactPCI bus INTA# interrupt signal. Up to two requests sourced from each IP mapped to INTA#. Interrupts come from IP modules via access to IP
module INT space.

32-bit memory space: Upon power-up the system auto-configuration process (plug & play) maps the carrier’s base address (for a 1K byte block of memory) into the PCI bus 32-bit memory space.

Power Requirements

Power
3.3V (±5%): 300mA maximum.
5V (±5%): 30mA maximum.
±12V (±5%): 0mA (not used).
Plus IP module load.

MTBF: Contact factory

Environmental

Operating temperature: 0 to 70°C (AcPC8630A model) or -40 to 85°C (AcPC8630AE model).

Storage temperature: -55 to 100°C.

Relative humidity: 5 to 95% non-condensing.

The AcPC8630A is a drop in replacement for the AcPC8630, please see the known differences document below for more information.
Known difference between the AcPC8630 and the AcPC8630A statement.

  • Two industry-standard IP module slots
  • Board resides in memory space
  • Supports 8 and 32MHz operation
  • Supports IP module I/O, ID, INT, and MEM spaces
  • 100 I/O points with front access
  • High-density front connectors
  • Compatible with all CompactPCI CPUs
  • Compatible with 32-bit and 64-bit
  • CompactPCI® and PXI™ backplane
  • Plug-and-play carrier configuration and interrupt support
  • Two interrupt channels per IP module
  • Front panel LEDs
  • Supervisory circuit for reset generation
  • Individually filtered and fused power to each IP
  • Ruggedized with ESD strip and EMC front panel
  • Easily integrate IPs with your software using RTOS VxWorks, Linux, or Win DLL for
  • Windows® 2000/XP/Vista/7 32-bit systems.

 

IPSW-API-LNX (Log in to download the file)
IPSW-API: I/O Functions Routines Information Page (Log in to download the file)
  • Compare

    Embedded Cables

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    Select options
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    Select options
  • Compare

    Transition Modules

    • Various transition modules
    Select options

Additional information

Weight N/A
Dimensions N/A
Part Number

AcPC8630A: holds two IP modules., AcPC8630AE: holds two IP modules, extended temp. range

  • Description

    AcPC8630A: Nonintelligent 3U cPCI IP Carrier with Front I/O Description

    The AcPC8630A is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus. All 100 I/O points are brought out the front connectors for easy cable access.

    Performance Specifications

    General

    Acromag’s carrier boards provide full data access to the IP module’s I/O, ID, interrupt and memory spaces. With full access to the IP module’s programmable registers, you can easily configure and control their operation from the CompactPCI bus.

    Up to two interrupt requests are supported for each IP module. All board interrupts are mapped to PCI bus INTA# signal.

    Individual passive filters on each IP power supply line provide optimum filtering and noise isolation between the IP modules and the carrier board.

    IP Compliance (ANSI/VITA 4)

    Meets IP specs per ANSI/VITA 4-1995 (8MHz and 32 MHz operation) and IP I/O mapping to the front panel.
    Electrical/mechanical interface Supports single or double size IP modules.
    IP Module I/O space, ID space, INT, and MEM space supported.

    Interrupts: Supports two interrupt requests per IP module and interrupt acknowledge cycles via access to IP INT space.

    CompactPCI bus Compliance

    Meets PCI specification: V2.1 and PICMG 2.0, R2.1.

    Data transfer bus: Slave with 32-bit, 16-bit, and 8-bit data transfer operation. 32-bit read/write accesses are implemented as two 16-bit transfers to the IPs.

    Interrupts: CompactPCI bus INTA# interrupt signal. Up to two requests sourced from each IP mapped to INTA#. Interrupts come from IP modules via access to IP
    module INT space.

    32-bit memory space: Upon power-up the system auto-configuration process (plug & play) maps the carrier’s base address (for a 1K byte block of memory) into the PCI bus 32-bit memory space.

    Power Requirements

    Power
    3.3V (±5%): 300mA maximum.
    5V (±5%): 30mA maximum.
    ±12V (±5%): 0mA (not used).
    Plus IP module load.

    MTBF: Contact factory

    Environmental

    Operating temperature: 0 to 70°C (AcPC8630A model) or -40 to 85°C (AcPC8630AE model).

    Storage temperature: -55 to 100°C.

    Relative humidity: 5 to 95% non-condensing.

    The AcPC8630A is a drop in replacement for the AcPC8630, please see the known differences document below for more information.
    Known difference between the AcPC8630 and the AcPC8630A statement.

  • Features & Benefits

    • Two industry-standard IP module slots
    • Board resides in memory space
    • Supports 8 and 32MHz operation
    • Supports IP module I/O, ID, INT, and MEM spaces
    • 100 I/O points with front access
    • High-density front connectors
    • Compatible with all CompactPCI CPUs
    • Compatible with 32-bit and 64-bit
    • CompactPCI® and PXI™ backplane
    • Plug-and-play carrier configuration and interrupt support
    • Two interrupt channels per IP module
    • Front panel LEDs
    • Supervisory circuit for reset generation
    • Individually filtered and fused power to each IP
    • Ruggedized with ESD strip and EMC front panel
    • Easily integrate IPs with your software using RTOS VxWorks, Linux, or Win DLL for
    • Windows® 2000/XP/Vista/7 32-bit systems.

     

  • Specs & Data Sheets

  • Software

    IPSW-API-LNX (Log in to download the file)
    IPSW-API: I/O Functions Routines Information Page (Log in to download the file)
  • Accessories

    • Compare

      Embedded Cables

      • Communication Signal Cables
      • Wide assortment of ribbon cables
      Select options
    • Compare

      Termination Products

      • DIN rail-mount panels
      • 50 screw terminals on 50-pin connector termination panels
      • 50 screw terminals on SCSI-2 connector termination panels
      • 68 screw terminals on SCSI-3 connector termination panels
      Select options
    • Compare

      Transition Modules

      • Various transition modules
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    AcPC8630A: holds two IP modules., AcPC8630AE: holds two IP modules, extended temp. range