Click to zoom

Please sign in or register to see model options and to add products to your cart.

Product short description:
  • 32 isolated digital input channels
  • Extended temperature: -40 to 85°C
  • PCIe bus interface

AP441 modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels.

Click here to watch a short video highlighting the features of the AP441.

AP441: Isolated Digital Input with Interrupts Module Description

AP441: Isolated digital input with interrupts AcroPack modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels.

Isolation protects your computer system from noise, transient signals, and field wiring faults. The inputs are grouped into four 8-channel ports. Ports are isolated from the logic and each other.

Change-of-state, high-to-low and low-to high interrupts are individually programmable for each channel. Debounce eliminates spurious interrupts from noise and switching transients for error-free edge detection.

Closed-loop monitoring of critical control signals is easily accomplished using the AP441-XE-LF in conjunction with Acromag’s AP445E-LF digital output module.

Designed for COTS applications these digital input modules deliver high-density, high-reliability, and high-performance at a low cost.

The AP441 module is 70mm long, this is 19.05mm longer than the full length mini PCIe card at 50.95mm. The board’s width is the same as mPCIe board of 30mm and they use the same mPCIe standard board hold down standoff and screw keep out areas.

A down facing 100 pin Samtec connector will mate with the carrier card. Fifty of these signals are available as field I/O signals.

Pin spacing and signal assignments will allow for 100V of port to port isolation. Logic and field lines are isolated from each other for voltages up to 250V AC or DC on a continuous basis.

The AP441 series maintains the same functionality of the existing Industry Pack modules providing a smooth transition to the AcroPack I/O modules.

Learn more about the AcroPack Series and view all the models >

AP441: Isolated Digital Input with Interrupts Module Benefits & Features

  • PCI Express Generation 1 interface
  • 2.5 Gbps bus speed with one lane in each direction
  • 32 port-isolated input channels
  • Interrupt support for each channel
  • Programmable event interrupts (change-of-state, low-to-high or high-to-low transitions)
  • Programmable debounce
  • Input hysteresis
  • Reverse polarity protection
  • Software configuration (no jumpers or switches)
  • Software configuration allows “on-the-fly” changes without removing modules.
  • Pins are compatible with AP445E-LF output module for loopback monitoring
  • Loopback monitoring enables self-test and fault diagnostics to detect open switches or shorts.
  • Extended temperature range: -40 to 85°C

Learn more about the AcroPack Series and view all the models >

APSW-API-LNX (Log in to download the file)
APSW-API: I/O Functions Routines Information Page (Log in to download the file)
  • Compare

    AP-CC-01: Conduction-Cool Kit

    • Required for conduction-cooled applications using an AcroPack
    Select options
  • Compare

    APSW-API: I/O Function Routines for VxWorks, Windows, Linux

    • Programming interface with function routines for AcroPack modules/carriers.
    • Customizable for other operating systems.
    Select options

Additional information

Weight 0.8 oz
Dimensions 3.25 × 1.25 × 1 in
Part Number

AP441-1E-LF: ±4 to ±18V input range, AP441-2E-LF: ±16 to ±40V input range, AP441-3E-LF: ±38 to ±60V input range

Product Series

AcroPack Series

  • Description

    AP441: Isolated Digital Input with Interrupts Module Description

    AP441: Isolated digital input with interrupts AcroPack modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels.

    Isolation protects your computer system from noise, transient signals, and field wiring faults. The inputs are grouped into four 8-channel ports. Ports are isolated from the logic and each other.

    Change-of-state, high-to-low and low-to high interrupts are individually programmable for each channel. Debounce eliminates spurious interrupts from noise and switching transients for error-free edge detection.

    Closed-loop monitoring of critical control signals is easily accomplished using the AP441-XE-LF in conjunction with Acromag’s AP445E-LF digital output module.

    Designed for COTS applications these digital input modules deliver high-density, high-reliability, and high-performance at a low cost.

    The AP441 module is 70mm long, this is 19.05mm longer than the full length mini PCIe card at 50.95mm. The board’s width is the same as mPCIe board of 30mm and they use the same mPCIe standard board hold down standoff and screw keep out areas.

    A down facing 100 pin Samtec connector will mate with the carrier card. Fifty of these signals are available as field I/O signals.

    Pin spacing and signal assignments will allow for 100V of port to port isolation. Logic and field lines are isolated from each other for voltages up to 250V AC or DC on a continuous basis.

    The AP441 series maintains the same functionality of the existing Industry Pack modules providing a smooth transition to the AcroPack I/O modules.

    Learn more about the AcroPack Series and view all the models >

    AP441: Isolated Digital Input with Interrupts Module Benefits & Features

    • PCI Express Generation 1 interface
    • 2.5 Gbps bus speed with one lane in each direction
    • 32 port-isolated input channels
    • Interrupt support for each channel
    • Programmable event interrupts (change-of-state, low-to-high or high-to-low transitions)
    • Programmable debounce
    • Input hysteresis
    • Reverse polarity protection
    • Software configuration (no jumpers or switches)
    • Software configuration allows “on-the-fly” changes without removing modules.
    • Pins are compatible with AP445E-LF output module for loopback monitoring
    • Loopback monitoring enables self-test and fault diagnostics to detect open switches or shorts.
    • Extended temperature range: -40 to 85°C

    Learn more about the AcroPack Series and view all the models >

  • Specs & Data Sheets

  • Software

    APSW-API-LNX (Log in to download the file)
    APSW-API: I/O Functions Routines Information Page (Log in to download the file)
  • Accessories

    • Compare

      AP-CC-01: Conduction-Cool Kit

      • Required for conduction-cooled applications using an AcroPack
      Select options
    • Compare

      APSW-API: I/O Function Routines for VxWorks, Windows, Linux

      • Programming interface with function routines for AcroPack modules/carriers.
      • Customizable for other operating systems.
      Select options
  • Additional information

    Additional information

    Weight 0.8 oz
    Dimensions 3.25 × 1.25 × 1 in
    Part Number

    AP441-1E-LF: ±4 to ±18V input range, AP441-2E-LF: ±16 to ±40V input range, AP441-3E-LF: ±38 to ±60V input range

    Product Series

    AcroPack Series