• Universal TC type J, K, T, R, S, E, B, N or ±100mV input
• 4-20mA ouput (sink/source)
• 12-32 V DC loop/local power

The TT233 model is a space-saving two-wire transmitter that isolates and converts a millivolt or thermocouple sensor input to a proportional 4-20mA control signal. Power is received from the output loop current or a DC supply when using a three-wire connection. Click here to watch a short AcroMaggie video highlighting the TT230 Series.

• Multi-range ±20mA or ±500mV input
• 4-20mA ouput (sink/source)
• 12-32 V DC loop/local power

The TT236 model is a space-saving two-wire transmitter that isolates and converts a DC current or low voltage input to a proportional 4-20mA control signal. A single unit supports both voltage and current input for extra flexibility. Power is received from the output loop current or a DC supply when using a three-wire connection. Click here to watch a short AcroMaggie video highlighting the TT230 Series.

• Multi-range 0Hz to 100KHz frequency input
• Multi-range 0Hz to 3KHz PWM input
• 4-20mA output (sink/source)
• 12-32V DC power

The TT239 model is a space-saving two-wire transmitter that isolates and converts a frequency, pulse, or pulse-width modulation (PWM) input to a proportional 4-20mA signal. You can select to measure either the input frequency or the duty cycle. Power is received from the output loop current or a DC supply when using a three-wire connection. Click here to watch a short AcroMaggie video highlighting the TT230 Series.  

• Universal thermocouple / millivolt input
• Universal current / voltage output
• 12-32V DC local / bus power

The TT333 model is a space-saving four-wire transmitter that isolates and converts a millivolt or thermocouple sensor input to a proportional control signal. DC current and voltage output are both supported on a single model. Click here to watch a short video highlighting the TT330 Series.

• Multi-range ±20mA or ±500mV input
• Universal current/voltage output
• 12-32V DC power

DC current and voltage output are both supported on a single model. An optional DIN rail bus can deliver primary or redundant power to multiple units without wiring. Click here to watch a short video highlighting the TT330 Series.

• Multi-range 0Hz to 100KHz input
• Universal current/voltage output
• 12-32V DC local/bus power

The TT339 model is a space-saving four-wire transmitter that isolates and converts a frequency or pulse input to a proportional control signal. DC current and voltage output are both supported on a single model. An optional DIN rail bus can deliver primary or redundant power to multiple units without wiring. Click here to watch a short video highlighting the TT330 Series.

• 100 ohm Pt RTD or 0-900 ohm input
• 4-20mA output (sink/source)
• 12-32V DC loop/local power
• USB configuration

The TT231 model is a space-saving two-wire transmitter that converts a 100 ohm Platinum RTD sensor input to a proportional 4-20mA signal. Power is received from the output loop current or a DC supply when using a three-wire connection. Click here to watch a short AcroMaggie video highlighting the TT230 Series.

• Universal thermocouple or ±100mV input
• 4-20mA outputs (sink/source)
• 7-32V DC Loop/local power

The SP233 model is a high-performance signal splitter that converts one millivolt or thermocouple sensor input into two proportional isolated 4-20mA control signals. Power is received from one or both output loop currents. Click here to watch a short video highlighting the features of the Acromag SP Series.

• DC current and low voltage input
• 4-20mA outputs (sink/source)
• 7-32V DC loop power

The SP236 model is a high-performance signal splitter that converts one DC current or millivolt input into two isolated proportional 4-20mA control signals. Power is received from one or both output loop currents. Click here to watch a short video highlighting the features of the Acromag SP Series.

• Multi-range ±1V, ±5V, or ±10V input
• 4-20mA outputs (sink/source)
• 7-32V DC loop power

The SP237 model is a high-performance signal splitter that converts one process-level DC voltage input into two proportional isolated 4-20mA control signals. Power is received from one or both output loop currents. Click here to watch a short video highlighting the features of the Acromag SP Series.

• Multi-range ±15V, ±75V, or ±150V input
• 4-20mA outputs (sink/source)
• 7-32V DC loop/local power

The SP238 model is a high-performance signal splitter that converts one high-level DC voltage input into two proportional isolated 4-20mA control signals. power is received from one or both output loop currents. Click here to watch a short video highlighting the features of the Acromag SP Series.

• Universal thermocouple or ±100mV input
• 0-20mA, ±10V or 0-10V outputs
• 6-32V DC external power

The SP333 is a high-performance signal splitter that converts one millivolt or thermocouple input into two isolated proportional control signals. A variety of current and voltage output ranges are supported. Click here to watch a short video highlighting the features of the Acromag SP Series.

• DC current and low voltage input
• 0-20mA, ±10V outputs
• 6-32V DC external power

The SP336 is a high-performance signal splitter that converts one DC current or millivolt input into two isolated proportional control signals. A variety of current and voltage output ranges are supported. Power connects on a terminal block, a rail bus, or both for redundancy. Click here to watch a short video highlighting the features of the Acromag SP Series.

• Multi-range ±1V, ±5V, or ±10V input
• 0-20mA, ±10V or 0-10V outputs
• 6-32V DC external power

The SP337 is a high-performance signal splitter that converts one process-level DC voltage input into two isolated proportional control signals. A variety of current and voltage output ranges are supported. Click here to watch a short video highlighting the features of the Acromag SP Series.

• Multi-range ±15, ±75, or ±150V input
• 0-20mA, ±10V or 0-10V outputs
• 6-32V DC external power

The SP338 is a high-performance signal splitter that converts one high-level DC voltage input into two isolated proportional control signals. A variety of current and voltage output ranges are supported. Click here to watch a short video highlighting the features of the Acromag SP Series.