• 0-11mA, 0-20mA, 4-20mA, ±20mA, or 0-20 amps AC Input
• 8 analog differential current input channels
• 12 to 32V DC Power (2.8W)
• Modbus TCP/IP, Ethernet/IP, Profinet
• i2o® peer-to-peer available for Modbus TCP/IP only

The XT1210 offers an isolated Ethernet network interface for up to eight differential current input channels. Isolated differential inputs deliver better measurements, superior noise rejection, and eliminate the need for current loop isolators.    

• ±5V, ±10V, 0-5V, 0-10V Input
• 8 analog differential voltage input channels
• 12 to 32V DC Power (2.8W)
• Modbus TCP/IP, Ethernet/IP, Profinet
• i2o® peer-to-peer available for Modbus TCP/IP only

The XT1220 offers an isolated Ethernet network interface for up to eight differential voltage input channels.

• 0-11mA, 0-20mA, 4-20mA, ±20mA, or 0-20 amps AC Input
• 16 analog single-ended current input channels
• 12 to 32V DC Power (2.8W)
• Modbus TCP/IP, Ethernet/IP, Profinet
• i2o® peer-to-peer available for Modbus TCP/IP only

The XT1230 offers an isolated Ethernet network interface for up to to sixteen single-ended current input channels.

• Input: ±5V, ±10V, 0-5V, 0-10V
• 16 analog single-ended voltage input channels
• 12 to 32V DC Power (2.8W)
• Modbus TCP/IP, Ethernet/IP, Profinet
• i2o® peer-to-peer available for Modbus TCP/IP only

The XT1240 offers an isolated Ethernet network interface for up to to sixteen single-ended voltage input channels.

• 4 Analog DC Current Outputs
• 4 Discrete Voltage I/O Channels
• 12 to 32V DC Power (2.8W)
• Modbus TCP/IP, Ethernet/IP, Profinet
• i2o® peer-to-peer available for Modbus TCP/IP only

The XT1530 interfaces analog output and discrete I/O signals between measurement and control devices over Ethernet. Discrete I/O are individually configurable for input or high-side switched output operation.

• 8 Analog DC Voltage Outputs ±10V (calibrated), ±5V (sub-range)
• 4 Discrete Voltage I/O Channels 0-32V DC
• 12 to 32V DC Power (2.8W)
• Modbus TCP/IP, Ethernet/IP, Profinet
• i2o® peer-to-peer available for Modbus TCP/IP only

The XT1540 interfaces analog output and discrete I/O signals between measurement and control devices over Ethernet. Discrete I/O are individually configurable for input or high-side switched output operation.

• 4 analog inputs
• 2 analog output
• 6 discrete I/O channels
• Ethernet/IP, Modbus TCP/IP
• i2o peer-to-peer available for Modbus TCP/IP only

These modules provide an isolated Ethernet network interface for analog and discrete I/O signals. Multi-range analog inputs and outputs support a wide variety of industrial devices. High-resolution, low noise, A/D and D/A converters deliver high accuracy and reliability.

• 6-channel differential analog current or voltage input
• Ethernet/IP, Modbus TCP/IP
• i2o peer-to-peer available for Modbus TCP/IP only

These modules provide an isolated Ethernet network interface for six analog input channels. Differential inputs eliminate ground loops and thus the need for isolators in many applications. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability.

• 4 or 6-channel thermocouple/milliVolt input
• Ethernet/IP, Modbus TCP/IP
• i2o peer-to-peer available for Modbus TCP/IP 6-channel only

These modules provide an isolated Ethernet network interface for up to six input channels. Differential inputs eliminate ground noise and each terminal block includes a cold junction compensation (CJC) sensor for more precise temperature measurements. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability.

• 4 or 6-channel RTD/resistance input
• Ethernet/IP, Modbus TCP/IP
• i2o peer-to-peer available for Modbus TCP/IP 6-channel only

These modules provide an isolated Ethernet network interface for up to six input channels. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability. Three-way isolation further improves the system performance.

• 8-channel differential current input
• Modbus TCP/IP, 10/100Base-T(X), i2o peer-to-peer

These modules interface high-level analog input signals to an Ethernet network. A high-performance design ensures reliable measurements and dependable operation.

• 8-channel differential analog voltage input
• Modbus TCP/IP, i2o peer-to-peer communication

These modules interface high-level analog input signals to an Ethernet network. A high-performance design ensures reliable measurements and dependable operation.

• 4 or 6-channel DC current or voltage output
• Ethernet/IP, Modbus TCP/IP
• i2o peer-to-peer available for Modbus TCP/IP only

These modules provide up to six channels of analog output. Multi-range outputs support a wide variety of industrial devices. They can drive displays and recorders, control drives, or send analog signals to other systems. High-resolution, low noise, D/A converters deliver high accuracy and reliability. Three-way isolation further improves system performance.

• 12-channel discrete input and/or output
• Ethernet/IP, Modbus TCP/IP
• i2o peer-to-peer available for Modbus TCP/IP

These modules provide an isolated Ethernet network interface for twelve discrete input and/or output channels. The outputs provide direct on/off, high/low, or open/close control of industrial devices. The inputs sense the status of motors, pumps, valves and other equipment. The 983EN model with tandem I/O provides output level control and status verification in one unit.

• 96 bi-directional discrete I/O channels
• Modbus TCP/IP, i20 peer-to-peer communication

EtherStax I/O blocks provide a ruggedized, high-density solution to interface a very large quantity of discrete I/O signals to your control system. A stackable aluminum housing maintains a small footprint and stands up to harsh, industrial environments. Web-based configuration simplifies setup with any web browser.

• 48 Channel-Isolated Discrete I/O (32 DC inputs, 16 AC/DC outputs)
• Modbus TCP/IP, i20 peer-to-peer

EtherStax I/O blocks provide a ruggedized, high-density solution to interface a large quantity of isolated discrete I/O signals to your control system. A stackable aluminum housing maintains a small footprint and stands up to harsh, industrial environments. Web-based configuration simplifies setup with any web browser.