Acromag’s cost-effective PMC-SLX modules feature a user-configurable Xilinx® Spartan®-6 FPGA enhanced with high-speed memory and a high-throughput PCI-X interface. Field I/O interfaces to the PMC FPGA via the rear J4/P4 connector and/or with optional front mezzanine AXM plug-in I/O modules. The result is a powerful and flexible I/O processor module that is capable of executing custom instruction sets and algorithms. Large, high-speed memory banks enable efficient data handling. The dual-port SRAM facilitates high-speed DMA transfers to the bus or CPU. A high-bandwidth PCI-X interface ensures fast data throughput. 64 I/O lines are accessible through the rear (J4) connector. Additional I/O processing is supported on a separate mezzanine card that plugs into the PMC FPGA base board. A variety of these external AXM I/O cards are available to interface your analog and digital I/O signals. Take advantage of the conduction-cooled design for use in hostile environments. Conduction efficiently dissipates heat if there is inadequate cooling air flow. Optional extended temperature models operate reliably from -40 to 85°C. Acromag’s Engineering Design Kit provides software utilities and example VHDL code to simplify your program development and get you running quickly. A JTAG interface enables on-board VHDL debugging.

Specifications

FPGA

FPGA Device: Xilinx Spartan-6 FPGA. Model XC6SLX150-3FG676 FPGA with 147,433 logic cells and 180 DSP48A1 slices. FPGA Configuration: Download via PCI-X bus or flash memory. Example FPGA Program: VHDL provided for bus interface, front & rear I/O control, SRAM read/write interface logic, and SDRAM memory interface controller. See EDK kit.

I/O Processing

Acromag AXM I/O modules: AXM modules plug into the PMC module’s front mezzanine for additional I/O lines. Analog and digital I/O AXM modules are sold separately. Rear I/O: 64 I/O (32 LVDS) lines supported with a direct connection between the FPGA and the rear I/O connector (J4).

Engineering Design Kit

Provides user with basic information required to develop a custom FPGA program. Kit must be ordered with the first purchase of a PMC-SLX module (see www.acromag.com for more information).

PMC Compliance

Conforms to PCI Local Bus Specification, Revision 3.0 and CMC/PMC Specification, P1386.1. Electrical/Mechanical Interface: Single-Width Module PCI Bus Modes: Supports PCI-X at 100MHz, 66MHz and Standard PCI at 66MHz and 33MHz PCI-X Master/Target: 32-bit or 64-bit interface Signaling: 3.3V compliant. Interrupts (INTA#): Interrupt A is used to request an interrupt.

Environmental

Operating Temperature: -0 to 70°C or -40 to 85°C (E versions). Storage Temperature: -55 to 125°C. Relative Humidity: 5 to 95% non-condensing. Power: 3.3V (±5%): 700mA typical, 840mA maximum; 5V (±5%): 1600mA typical, 2160mA maximum. MTBF: Contact the factory

Showing all 1 result

  • Compare
    Compare

    PMC-SLX: User-Configurable Spartan-6 FPGA Modules with Plug-In I/O

    • 147,433 logic cells (XC6SLX150)
    $3,045 – $3,990
    Select options