This PMC module carrier card allows use of a PMC module in an independent stand-alone mode. The carrier card delivers power to the PMC module and regulates the PCI bus start-up sequence to prevent a system lock-up by the connection to the local bus. As a non-intelligent carrier, the board acts simply as an adapter to route signals to and from the PMC module. The user has full access to the field I/O via two 50-pin ribbon cable connectors.

Performance Specifications

PMC Compatibility

Pin assignment conforms to PCI Bus Specification, Revision 3.0. Physical Configuration Height: 3.300 inches (83820 mm). Depth: 3.520 inches (89.408 mm). Board Thickness: 0.063 inches (1.600 mm). Unit Weight: 0.107 lbs. (0.053 kg). Connectors: P1, P2 (Field I/O): 50-pin, ribbon cable, male receptacle headers. P3: 4-pin power header. P4: 14-pin Xilinx JTAG port. J1 - J4: 64-pin PMC module connectors.

Environmental

Operating temperature: -40 to 85°C. Storage temperature: -55 to 120°C. Relative humidity: 5 to 95% non-condensing. Power +5V (±5%): 66mA, typical. +12V (±10%): 0mA, used by PMC module only. -12V (±10%): 0mA, used by PMC module only." Note that 3.3V is generated from the 5V supply. Power requirements do not include the PMC module. ±12.0V DC is optional based on user’s needs.

Isolation

Non-Isolated. PCI interface and field commons have a direct electrical connection. MTBF: Contact the factory.

• Compare

  Compare

  APMC4110: Busless PMC Carrier Card

  • Holds one PMC module
  • Delivers power to PMC module
  • Enables a trouble-free start-up sequence

  $295

  Select options