AcPC730 I/O boards provide a variety of I/O functions on a single card. These high-density boards perform both high-speed and high-resolution A/D and D/A conversion and also handle digital I/O plus counter/timer functions. Now you can conserve your precious card slots and still get all the I/O functionality you need. The AcPC730 is designed for extreme versatility with many deluxe features to meet most applications. However, the AcPC730 is still very budget-friendly.

Specifications

Analog Input

Input configuration: 16 differential or 32 single-ended channels multiplexed to a single A/D converter. A/D resolution: 16 bits. Input ranges: ±3.3V, ±5V, ±10V, 0-5V, and 0-10V. Maximum throughput rate: One channel updated at a time. 1 channel (maximum): 10μS 16 channels (maximum): 160μS 32 channels (maximum): 320μS Data sample memory: 512 samples shared by all channels. A/D trigger: Internal timer, external source, software. On-board timer: One user-programmable timer for analog input acquisition control. System accuracy: ±3 LSB typ. (SW calib., gain=1, 25°C). Data format: Straight binary or binary two’s compliment. Input overvoltage protection: -40 to 55V power off. Common mode rejection ratio (60Hz): 96dB typical. Channel-to-channel rejection ratio (60Hz): 96dB typical.

Analog Output

Output configuration: 8 single-ended channels, each controlled by its own independent D/A converter. D/A resolution: 16 bits. Output range: ±10V. Maximum throughput rate: Outputs updated simultaneously or individually. 1 channel: 12.375μS 8 different channels: 12.375μS DAC programming: Via independent channel registers or through shared FIFO. Data sample memory: 1024 sample FIFO shared by all channels. D/A trigger: Internal timer, external source, software. On-board timer: One user-programmable timer for analog output control. System accuracy: 0.0076% of 20V span max. error corrected (i.e. calibrated) at 25°C with output unloaded. Data format: Straight binary. Output at reset: 0V. Output current: -10 to 10mA (maximum). Short circuit protection: Indefinite at 25°C.

Digital I/O

I/O channel configuration: 16 TTL transceivers, input/ output direction selectable on an 8-channel basis.

Digital Input

Input voltage range: 0 to 5V DC. Input signal threshold: Low to high: 2.0V typical. High to low: 0.8V typical. Input response time: 250 nanoseconds. Interrupts: 16 channels of interrupts for high-to-low, low-to-high, or any change-of-state event types. Debounce: Individual debounce selectable on each channel. User-selectable (4μS, 64μS, 1mS, or 8mS).

Digital Output

Output voltage range: 0 to 5V DC. Output ON current range: -15 to 64mA. Output pullups: 4.7K ohm socketed resistors.

Counter/Timers

Counter/timer configuration: one 32-bit counter (requires use of channels 2 through 5 of digital I/O section). Functions: Watchdog timer, event counting, pulse measurement, period measurement, output waveform generation (pulse width modulation, continuous pulse, single pulse, continuous waveform). Internal clock: Programmable 1, 4, 8MHz. External clock: 3.4MHz. Input voltage range: 0 to 5V DC. Output voltage range: 0 to 5V with 4.7 ohm pull-up. Maximum of 0 to 35V with external supply.

CompactPCI bus Compliance

Meets PCI spec. V2.1 and PICMG 2.0, R3.0. Data transfer bus: Slave with 32-bit, 16-bit, and 8-bit data transfer operation 32-bit read/write accesses are implemented as two 16-bit transfers. Interrupts (INTA#): Interrupt A is used to request an interrupt. Plug-and-Play: The system maps the base address into the PCI bus 32-bit memory space.

Environmental

Operating temperature: 0 to 70°C (E version -40 to 85°C) Storage temperature: -40 to 85°C. Relative humidity: 5 to 95% non-condensing. Power: 245mA at 5V (290mA maximum). MTBF: Consult factory.

Showing all 1 result

  • Compare

    AcPC730: Multifunction 3U cPCI Board

    • 16D/32SE analog inputs, 16-bit A/D
    • Eight analog outputs, 16-bit D/A
    • 16 TTL digital I/O
    • One 32-bit counter/timer
    $1,545$1,680
    Select options