These units convert a 4-20mA process current input into two identical isolated 4-20mA output signals. Power is obtained from the output loop (sinks current). Each channel operates independently to prevent interaction between channels. Galvanic isolation eliminates ground loops, reduces noise, and blocks transient signals. Splitters are available in 2-wire loop-powered and 4-wire AC/DC-powered models. The loop powered model runs on 12-50 VDC power from the output loop, has a built-in isolated excitation supply with short circuit protection, and can drive up to two field 2-wire process loops. The AC/DC-powered unit runs on 5-36 VDC SELV or 90-250 VAC with a low input burden that keeps voltage drop to less than 1.5 V for full-scale current and support wide 0 to 1000 ohm load range with no trimming is required if the load varies. Current limiting safely limits output to 27 mA. The splitters are DIN-rail mountable and feature removable terminal blocks. Both units feature pluggable terminals, zero/span trim pots and power LEDs that make installation, maintenance, and long term service easy.

Showing all 5 results

  • Compare

    SP233: Thermocouple/ milliVolt Input Signal Splitter; Two-wire

    • Universal thermocouple or ±100mV input
    • 4-20mA outputs (sink/source)
    • 7-32V DC Loop/local power
    $285
    Select options
  • Compare

    SP236: Current/milliVolt Input Splitter; Two-wire

    • DC current and low voltage input
    • 4-20mA outputs (sink/source)
    • 7-32 V DC loop power
    $250
    Select options
  • Compare

    SP237: Process Voltage Input Signal Splitter; Two-wire

    • Multi-range ±1V, ±5V, or ±10V input
    • 4-20mA outputs (sink/source)
    • 7-32V DC loop power
    $260
    Select options
  • Compare

    SP238: High Voltage Input Signal Splitter; Two-wire

    • Multi-range ±15V, ±75V, or ±150V input
    • 4-20mA outputs (sink/source)
    • 7-32V DC loop/local power
    $275
    Select options
  • Compare

    653T: Signal Splitter, Loop-Powered

    • One 4 to 20mA DC input
    • Two 4 to 20mA DC outputs
    • 12-50V DC power from output loop
    • Signal splitter provides two identical outputs from one input signal
    These units convert a 4-20mA process current input into two identical isolated 4-20mA output signals. Power is obtained from the output loop (sinks current).
    $310
    Read more