Home » Signal Conditioners & Network I/O » Ethernet I/O Modules » Ethernet Analog I/O
These Ethernet analog I/O modules perform A/D or D/A conversion to interface sensors, instruments, and actuators to a Modbus TCP/IP, Ethernet/IP, Modbus UDP/IP, or Profinet control network. Modbus TCP/IP modules features i2o® peer-to-peer and multicast communication. These Ethernet analog I/O modules feature dual RJ45 ports for daisy chain and redundant ring topology.

What is EtherNet/IP - click to learn more

Showing 1–16 of 30 results

  • Compare
    Compare

    NT2210: Ethernet Analog I/O Modules with 8 Differential Current Inputs, 2 Discrete I/O

    Contact Factory for Availability
    • 8 differential current inputs
    • 2 discrete I/O
    • Ethernet I/O plus Expansion I/O
    • Multi-protocol support
    NT2210 modules offer 8 current inputs and 2 limit alarms. Each input has true differential 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 4-20mA loops. Appending NTX expansion models can interface up to 32 differential current inputs on a single IP address. Click here to watch a short video highlighting the features of the BusWorks NT Series.
    Select options
  • Compare
    Compare

    NT2220: Ethernet Analog I/O Modules with 16 Single-ended Current Inputs

    Contact Factory for Availability
    • 16 single-ended current inputs
    • Ethernet I/O plus Expansion I/O
    • Multi-protocol support
    NT2240 modules offer 16 current inputs. Each input supports bipolar and unipolar ranges with 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 4-20mA loops. Appending NTX expansion models can interface up to 64 current inputs on a single IP address. Click here to watch a short video highlighting the features of the BusWorks NT Series.
    Select options
  • Compare
    Compare

    NT2230: Ethernet Analog I/O Modules with 8 Differential Voltage Inputs, 2 Discrete I/O

    Contact Factory for Availability
    • 8 differential voltage inputs
    • 2 discrete I/O
    • Ethernet I/O plus Expansion I/O
    • Multi-protocol support
    NT2230 modules offer 8 voltage inputs and 2 limit alarms. Each input has true differential 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 0-10V devices. Appending NTX expansion models can interface up to 32 differential voltage inputs on a single IP address. Click here to watch a short video highlighting the features of the BusWorks NT Series.
    Select options
  • Compare
    Compare

    NT2240: Ethernet Analog I/O Modules with 16 Single-ended Voltage Inputs

    Contact Factory for Availability
    • 16 single-ended voltage inputs
    • Ethernet I/O plus Expansion I/O
    • Multi-protocol support
    NT2240 modules offer 16 voltage inputs. Each input supports bipolar and unipolar ranges with 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 0-10V devices. Appending NTX expansion models can interface up to 64 voltage inputs on a single IP address. Click here to watch a short video highlighting the features of the BusWorks NT Series.
    Select options
  • Compare
    Compare

    NT2310: Ethernet Analog Output Modules with 8 Process Current Outputs

    Contact Factory for Availability
    • 8 process current outputs
    • Ethernet I/O plus Expansion I/O
    • Multi-protocol support
    NT2310 modules offer 8 current outputs. Each output is driven by a 16-bit DAC. NTE Ethernet models provide a compact network interface to control 4-20mA loops. Appending NTX expansion models can interface up to 32 current outputs at a single IP address.
    Select options
  • Compare
    Compare

    NT2320: Ethernet Analog Output Modules with 8 Process Voltage Outputs

    Contact Factory for Availability
    • 8 process voltage outputs
    • Ethernet I/O plus Expansion I/O
    • Multi-protocol support
    NT2320 modules offer 8 voltage outputs. Each output is driven by a 16-bit DAC. NTE Ethernet models provide a compact network interface to control voltage signal levels. Appending NTX expansion models can interface up to 32 voltage outputs at a single IP address.
    Select options
  • Compare
    Compare

    XT1210: 8-Channel Differential Analog Current Input Module

    • 0-11mA, 0-20mA, 4-20mA, ±20mA, or 0-20 amps AC Input
    • 8 analog differential current input channels
    • 12 to 32V DC Power (2.8W)
    • Modbus TCP/IP, Ethernet/IP, Profinet
    • i2o® peer-to-peer available for Modbus TCP/IP only
    The XT1210 offers an isolated Ethernet network interface for up to eight differential current input channels. Isolated differential inputs deliver better measurements, superior noise rejection, and eliminate the need for current loop isolators.
    Select options
  • Compare
    Compare

    XT1220: 8-Channel Differential Analog Voltage Input Module

    • ±5V, ±10V, 0-5V, 0-10V Input
    • 8 analog differential voltage input channels
    • 12 to 32V DC Power (2.8W)
    • Modbus TCP/IP, Ethernet/IP, Profinet
    • i2o® peer-to-peer available for Modbus TCP/IP only
    The XT1220 offers an isolated Ethernet network interface for up to eight differential voltage input channels.
    Select options
  • Compare
    Compare

    XT1230: 16-Channel Single-Ended Analog Current Input Module

    • 0-11mA, 0-20mA, 4-20mA, ±20mA, or 0-20 amps AC Input
    • 16 analog single-ended current input channels
    • 12 to 32V DC Power (2.8W)
    • Modbus TCP/IP, Ethernet/IP, Profinet
    • i2o® peer-to-peer available for Modbus TCP/IP only
    The XT1230 offers an isolated Ethernet network interface for up to to sixteen single-ended current input channels.
    Select options
  • Compare
    Compare

    XT1240: 16-Channel Single-ended Analog DC Voltage Input Module

    • Input: ±5V, ±10V, 0-5V, 0-10V
    • 16 analog single-ended voltage input channels
    • 12 to 32V DC Power (2.8W)
    • Modbus TCP/IP, Ethernet/IP, Profinet
    • i2o® peer-to-peer available for Modbus TCP/IP only
    The XT1240 offers an isolated Ethernet network interface for up to to sixteen single-ended voltage input channels.
    Select options
  • Compare
    Compare

    XT1530: Analog Output & Digital I/O Ethernet Modules

    • 4 Analog DC Current Outputs
    • 4 Discrete Voltage I/O Channels
    • 12 to 32V DC Power (2.8W)
    • Modbus TCP/IP, Ethernet/IP, Profinet
    • i2o® peer-to-peer available for Modbus TCP/IP only
    The XT1530 interfaces analog output and discrete I/O signals between measurement and control devices over Ethernet. Discrete I/O are individually configurable for input or high-side switched output operation.
    Select options
  • Compare
    Compare

    XT1540: Analog Output & Digital I/O Ethernet Modules

    • 8 Analog DC Voltage Outputs ±10V (calibrated), ±5V (sub-range)
    • 4 Discrete Voltage I/O Channels 0-32V DC
    • 12 to 32V DC Power (2.8W)
    • Modbus TCP/IP, Ethernet/IP, Profinet
    • i2o® peer-to-peer available for Modbus TCP/IP only
    The XT1540 interfaces analog output and discrete I/O signals between measurement and control devices over Ethernet. Discrete I/O are individually configurable for input or high-side switched output operation.
    Select options
  • Compare
    Compare

    951EN, 952EN: Ethernet Analog and Discrete I/O Modules

    • 4 analog inputs
    • 2 analog output
    • 6 discrete I/O channels
    • Ethernet/IP, Modbus TCP/IP
    • i2o peer-to-peer available for Modbus TCP/IP only
    These modules provide an isolated Ethernet network interface for analog and discrete I/O signals. Multi-range analog inputs and outputs support a wide variety of industrial devices. High-resolution, low noise, A/D and D/A converters deliver high accuracy and reliability.
    Select options
  • Compare
    Compare

    958EN: Ethernet 8B Interface Modules

    • 16-chanel single-ended voltage input
    • DB25 port for 8B modules
    • Modbus TCP/IP communication
    These modules interface high-level analog input signals to an Ethernet control network. A high-performance design ensures reliable measurements and dependable operation.  
    Select options
  • Compare
    Compare

    961EN, 962EN: Ethernet Analog Input Modules

    • 6-channel differential analog current or voltage input
    • Ethernet/IP, Modbus TCP/IP
    • i2o peer-to-peer available for Modbus TCP/IP only
    These modules provide an isolated Ethernet network interface for six analog input channels. Differential inputs eliminate ground loops and thus the need for isolators in many applications. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability.
    Select options
  • Compare
    Compare

    963EN, 964EN: Ethernet Analog Input Modules

    • 12-channel single-ended analog current or voltage input
    • Ethernet/IP or Modbus TCP/IP communication
    These modules provide an isolated Ethernet network interface for twelve analog input channels. Compact design saves space and lowers system costs. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability.
    Select options
Acromag - Your I/O Experts

Ethernet I/O - Continued

Acromag's Ethernet/IP, Modbus TCP I/O, and Profinet products offer a variety of solutions for remote I/O, distributed process control, and factory automation applications. Analog and discrete Ethernet I/O modules interface sensors and actuators to controllers with Modbus TCP/IP or Ethernet/IP CIP protocol network communication.

4 Series of Ethernet I/O Solutions to Choose From

BusWorks NT Series Expandable Ethernet Remote I/O

● NEW BusWorks NT Series Expandable Ethernet Remote I/O 

Ethernet remote I/O modules support a mix of up to 64 channels of discrete, analog or temperature on a single IP address.

  • Ethernet/IP, Modbus TCP/IP, Profinet, and i2o peer-to-peer or multicast communication
  • MQTT, OPC-VA for IIoT
  • Dual RJ45 ports for daisy chain topology
  • Easy configuration using Internet browser

Download the Busworks NT Series Brochure 🡲

See all Model Functions 🡲

Ethernet I/P Modules

● BusWorks XT Series 

High-performance, space-saving remote, analog and discrete I/O modules - with Xtra Technology - for Ethernet networks.

  • Ethernet/IP, Profinet, Modbus TCP/IP, and i2o peer-to-peer communication
  • Redundant and bussed DC power
  • Easy PC/Windows configuration via USB

Download the Busworks XT Series Brochure 🡲

See all Model Functions 🡲

BusWorks 900EN Series

● BusWorks 900EN Series 

A series of dependable, yet economical, remote analog and discrete I/O modules for Ethernet or RS485 networks.

  • Ethernet/IP, Modbus TCP/IP, i2o peer-to-peer, Modbus-RTU, and Profibus-DP communication
  • Easy configuration using Internet browser or Windows software

Download the Busworks 900EN Series Brochure 🡲

See all Model Functions 🡲

i2o Peer-to-Peer Communication: Acromag EtherStax

● EtherStax ES2000 Series

High-density I/O blocks designed for high-reliability operation in Ethernet networks.

  • Modbus TCP/IP, UDP/IP, and i2o peer-to-peer communication
  • Up to 96 channels of discrete or analog I/O in a vertically-stackable unit
  • Redundant power and communication

Download the EtherStax ES2000 Series Brochure 🡲

See all Model Functions 🡲

Click here to download - Monitoring and Control Solutions Product Summary Guide
Watch Now: Process Automation Products Overview Video

Network I/O Whitepapers

As your I/O experts, Acromag is here to help! Below are three of our most popular application notes and whitepapers related to our Ethernet I/O products. Find more application notes, white papers and support here: https://www.acromag.com/support/

Read the latest industrial I/O, signal conditioning, and embedded I/O processing App Notes from Acromag.

Top 3 Ethernet I/O Application Notes:

1. What is Ethernet/IP? (Whitepaper)

2. How to Remotely Access Ethernet I/O Over the Internet (Whitepaper)

3. How Ethernet I/O Simplifies Communication Between One PLC and Multiple Remote Locations (Application Note)

Back to Top