Acromag remote I/O modules feature signal conditioners and network I/OÂ for a broad range of monitoring and control operations where controllers communicate with instrumentation on the plant floor or in the field. Signal Conditioners include signal transmitters, signal isolators, 4-20mA signal splitters, limit alarms and computation modules. These signal conditioners input voltage, current, thermocouple, RTD, frequency, thermistor, load cell, potentiometer, and discrete sensors. These signal conditioners output DC voltage and current, relay, frequency, pulse width modulation and display/readout. Ethernet remote I/O modules communicate via Ethernet/IP, Modbus TCP/IP, Modbus UDP/IP, and Profinet.
NT2210: Ethernet Analog I/O Modules with 8 Differential Current Inputs, 2 Discrete I/O
8 differential current inputs
2 discrete I/O
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2210 modules offer 8 current inputs and 2 limit alarms. Each input has true differential 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 4-20mA loops. Appending NTX expansion models can interface up to 32 differential current inputs on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2220: Ethernet Analog I/O Modules with 16 Single-ended Current Inputs
16 single-ended current inputs
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2240 modules offer 16 current inputs. Each input supports bipolar and unipolar ranges with 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 4-20mA loops. Appending NTX expansion models can interface up to 64 current inputs on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2230: Ethernet Analog I/O Modules with 8 Differential Voltage Inputs, 2 Discrete I/O
8 differential voltage inputs
2 discrete I/O
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2230 modules offer 8 voltage inputs and 2 limit alarms. Each input has true differential 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 0-10V devices. Appending NTX expansion models can interface up to 32 differential voltage inputs on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2240: Ethernet Analog I/O Modules with 16 Single-ended Voltage Inputs
16 single-ended voltage inputs
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2240 modules offer 16 voltage inputs. Each input supports bipolar and unipolar ranges with 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 0-10V devices. Appending NTX expansion models can interface up to 64 voltage inputs on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2310: Ethernet Analog Output Modules with 8 Process Current Outputs
8 process current outputs
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2310 modules offer 8 current outputs. Each output is driven by a 16-bit DAC. NTE Ethernet models provide a compact network interface to control 4-20mA loops. Appending NTX expansion models can interface up to 32 current outputs at a single IP address.
NT2320: Ethernet Analog Output Modules with 8 Process Voltage Outputs
8 process voltage outputs
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2320 modules offer 8 voltage outputs. Each output is driven by a 16-bit DAC. NTE Ethernet models provide a compact network interface to control voltage signal levels. Appending NTX expansion models can interface up to 32 voltage outputs at a single IP address.
XT1210: 8-Channel Differential Analog Current Input Module
0-11mA, 0-20mA, 4-20mA, ±20mA, or 0-20 amps AC Input
8 analog differential current input channels
12 to 32V DC Power (2.8W)
Modbus TCP/IP, Ethernet/IP, Profinet
i2o® peer-to-peer available for Modbus TCP/IP only
The XT1210 offers an Ethernet network interface for up to eight differential current input channels. Differential inputs deliver better measurements and superior noise rejection.
XT1530: Analog Output & Digital I/O Ethernet Modules
4 Analog DC Current Outputs
4 Discrete Voltage I/O Channels
12 to 32V DC Power (2.8W)
Modbus TCP/IP, Ethernet/IP, Profinet
i2o® peer-to-peer available for Modbus TCP/IP only
The XT1530 interfaces analog output and discrete I/O signals between measurement and control devices over Ethernet. Discrete I/O are individually configurable for input or high-side switched output operation.
XT1540: Analog Output & Digital I/O Ethernet Modules
8 Analog DC Voltage Outputs ±10V (calibrated), ±5V (sub-range)
4 Discrete Voltage I/O Channels 0-32V DC
12 to 32V DC Power (2.8W)
Modbus TCP/IP, Ethernet/IP, Profinet
i2o® peer-to-peer available for Modbus TCP/IP only
The XT1540 interfaces analog output and discrete I/O signals between measurement and control devices over Ethernet. Discrete I/O are individually configurable for input or high-side switched output operation.
Acromag’s configuration software is the key to the IntelliPack’s easy-to-use operation. The software employs the friendly Windows® interface with pull-down selection menus and fill-in-the-blank fields to speed you through a few brief configuration screens. No programming is required.
951EN, 952EN: Ethernet Analog and Discrete I/O Modules
4 analog inputs
2 analog output
6 discrete I/O channels
Ethernet/IP, Modbus TCP/IP
i2o peer-to-peer available for Modbus TCP/IP only
These modules provide an isolated Ethernet network interface for analog and discrete I/O signals. Multi-range analog inputs and outputs support a wide variety of industrial devices. High-resolution, low noise, A/D and D/A converters deliver high accuracy and reliability.
These modules interface high-level analog input signals to an Ethernet control network. A high-performance design ensures reliable measurements and dependable operation.
6-channel differential analog current or voltage input
Ethernet/IP, Modbus TCP/IP
i2o peer-to-peer available for Modbus TCP/IP only
These modules provide an isolated Ethernet network interface for six analog input channels. Differential inputs eliminate ground loops and thus the need for isolators in many applications. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability.
Welcome to our Signal Conditioning Selection Guide Videos. As a business with many helpful products to offer, we know it can be difficult to find which one you need. This quick selection guide should help point you in the right direction. Choose which video corresponds to your power needs, and the guide will show you which Acromag modules will work with your input.