Acromag remote I/O modules feature signal conditioners and network I/OÂ for a broad range of monitoring and control operations where controllers communicate with instrumentation on the plant floor or in the field. Signal Conditioners include signal transmitters, signal isolators, 4-20mA signal splitters, limit alarms and computation modules. These signal conditioners input voltage, current, thermocouple, RTD, frequency, thermistor, load cell, potentiometer, and discrete sensors. These signal conditioners output DC voltage and current, relay, frequency, pulse width modulation and display/readout. Ethernet remote I/O modules communicate via Ethernet/IP, Modbus TCP/IP, Modbus UDP/IP, and Profinet.
The DT233 model is a dual two-wire transmitter that isolates and converts millivolt or thermocouple sensor inputs to proportional 4-20mA control signals. Power is received from the output loop current.
Universal TC type J, K, T, R, S, E, B, N or ±100mV input
4-20mA ouput (sink/source)
12-32 V DC loop/local power
The TT233 model is a space-saving two-wire transmitter that isolates and converts a millivolt or thermocouple sensor input to a proportional 4-20mA control signal. Power is received from the output loop current or a DC supply when using a three-wire connection.
Click here to watch a short AcroMaggie video highlighting the TT230 Series.
TT236: Current / milliVolt Input Two-Wire Transmitter
Multi-range ±20mA or ±500mV input
4-20mA ouput (sink/source)
12-32 V DC loop/local power
The TT236 model is a space-saving two-wire transmitter that isolates and converts a DC current or low voltage input to a proportional 4-20mA control signal. A single unit supports both voltage and current input for extra flexibility. Power is received from the output loop current or a DC supply when using a three-wire connection.
Click here to watch a short AcroMaggie video highlighting the TT230 Series.
TT239: Frequency / Pulse / PWM Input, 12-32V DC Loop Power, 2-Wire Transmitter
Multi-range 0Hz to 100KHz frequency input
Multi-range 0Hz to 3KHz PWM input
4-20mA output (sink/source)
12-32V DC power
The TT239 model is a space-saving two-wire transmitter that isolates and converts a frequency, pulse, or pulse-width modulation (PWM) input to a proportional 4-20mA signal. You can select to measure either the input frequency or the duty cycle. Power is received from the output loop current or a DC supply when using a three-wire connection.
Click here to watch a short AcroMaggie video highlighting the TT230 Series.
The TT333 model is a space-saving four-wire transmitter that isolates and converts a millivolt or thermocouple sensor input to a proportional control signal. DC current and voltage output are both supported on a single model.
Click here to watch a short video highlighting the TT330 Series.
TT339: Frequency / Pulse Input, 12-32V DC Local/Bus Power Transmitter
Multi-range 0Hz to 100KHz input
Universal current/voltage output
12-32V DC local/bus power
The TT339 model is a space-saving four-wire transmitter that isolates and converts a frequency or pulse input to a proportional control signal. DC current and voltage output are both supported on a single model. An optional DIN rail bus can deliver primary or redundant power to multiple units without wiring.
Click here to watch a short video highlighting the TT330 Series.
DT236: Current / milliVolt Input Two-Wire Dual Transmitter
 Dual channels
 ±20mA, ±500mV inputs
4-20mA outputs (sink/source)
7-32V DC loop power
The DT236 model is a dual two-wire transmitter that isolates and converts DC current or low voltage inputs to proportional 4-20mA control signals. Power is received from the output loop current or a DC supply when using a three-wire connection.
Click here to watch a short video highlighting the features of the DT236.
DT336: Current / milliVolt Input Four-Wire Dual Transmitter
Dual channels
±20mA, ±500mV inputs
0-20mA, ±10V outputs
6-32V DC local/bus power
The DT336 model is a four-wire dual transmitter that isolates and converts DC current or low voltage inputs to proportional control signals. Each channel supports DC current or voltage output.
NT2210: Ethernet Analog I/O Modules with 8 Differential Current Inputs, 2 Discrete I/O
8 differential current inputs
2 discrete I/O
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2210 modules offer 8 current inputs and 2 limit alarms. Each input has true differential 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 4-20mA loops. Appending NTX expansion models can interface up to 32 differential current inputs on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2220: Ethernet Analog I/O Modules with 16 Single-ended Current Inputs
16 single-ended current inputs
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2240 modules offer 16 current inputs. Each input supports bipolar and unipolar ranges with 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 4-20mA loops. Appending NTX expansion models can interface up to 64 current inputs on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2230: Ethernet Analog I/O Modules with 8 Differential Voltage Inputs, 2 Discrete I/O
8 differential voltage inputs
2 discrete I/O
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2230 modules offer 8 voltage inputs and 2 limit alarms. Each input has true differential 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 0-10V devices. Appending NTX expansion models can interface up to 32 differential voltage inputs on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2240: Ethernet Analog I/O Modules with 16 Single-ended Voltage Inputs
16 single-ended voltage inputs
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2240 modules offer 16 voltage inputs. Each input supports bipolar and unipolar ranges with 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 0-10V devices. Appending NTX expansion models can interface up to 64 voltage inputs on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2310: Ethernet Analog Output Modules with 8 Process Current Outputs
8 process current outputs
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2310 modules offer 8 current outputs. Each output is driven by a 16-bit DAC. NTE Ethernet models provide a compact network interface to control 4-20mA loops. Appending NTX expansion models can interface up to 32 current outputs at a single IP address.
NT2320: Ethernet Analog Output Modules with 8 Process Voltage Outputs
8 process voltage outputs
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2320 modules offer 8 voltage outputs. Each output is driven by a 16-bit DAC. NTE Ethernet models provide a compact network interface to control voltage signal levels. Appending NTX expansion models can interface up to 32 voltage outputs at a single IP address.
Welcome to our Signal Conditioning Selection Guide Videos. As a business with many helpful products to offer, we know it can be difficult to find which one you need. This quick selection guide should help point you in the right direction. Choose which video corresponds to your power needs, and the guide will show you which Acromag modules will work with your input.