Acromag remote I/O modules feature signal conditioners and network I/OÂ for a broad range of monitoring and control operations where controllers communicate with instrumentation on the plant floor or in the field. Signal Conditioners include signal transmitters, signal isolators, 4-20mA signal splitters, limit alarms and computation modules. These signal conditioners input voltage, current, thermocouple, RTD, frequency, thermistor, load cell, potentiometer, and discrete sensors. These signal conditioners output DC voltage and current, relay, frequency, pulse width modulation and display/readout. Ethernet remote I/O modules communicate via Ethernet/IP, Modbus TCP/IP, Modbus UDP/IP, and Profinet.
TT236: Current / milliVolt Input Two-Wire Transmitter
Multi-range ±20mA or ±500mV input
4-20mA ouput (sink/source)
12-32 V DC loop/local power
The TT236 model is a space-saving two-wire transmitter that isolates and converts a DC current or low voltage input to a proportional 4-20mA control signal. A single unit supports both voltage and current input for extra flexibility. Power is received from the output loop current or a DC supply when using a three-wire connection.
Click here to watch a short AcroMaggie video highlighting the TT230 Series.
DT236: Current / milliVolt Input Two-Wire Dual Transmitter
 Dual channels
 ±20mA, ±500mV inputs
4-20mA outputs (sink/source)
7-32V DC loop power
The DT236 model is a dual two-wire transmitter that isolates and converts DC current or low voltage inputs to proportional 4-20mA control signals. Power is received from the output loop current or a DC supply when using a three-wire connection.
Click here to watch a short video highlighting the features of the DT236.
DT336: Current / milliVolt Input Four-Wire Dual Transmitter
Dual channels
±20mA, ±500mV inputs
0-20mA, ±10V outputs
6-32V DC local/bus power
The DT336 model is a four-wire dual transmitter that isolates and converts DC current or low voltage inputs to proportional control signals. Each channel supports DC current or voltage output.
NT2210: Ethernet Analog I/O Modules with 8 Differential Current Inputs, 2 Discrete I/O
8 differential current inputs
2 discrete I/O
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2210 modules offer 8 current inputs and 2 limit alarms. Each input has true differential 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 4-20mA loops. Appending NTX expansion models can interface up to 32 differential current inputs on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2220: Ethernet Analog I/O Modules with 16 Single-ended Current Inputs
16 single-ended current inputs
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2240 modules offer 16 current inputs. Each input supports bipolar and unipolar ranges with 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 4-20mA loops. Appending NTX expansion models can interface up to 64 current inputs on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2230: Ethernet Analog I/O Modules with 8 Differential Voltage Inputs, 2 Discrete I/O
8 differential voltage inputs
2 discrete I/O
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2230 modules offer 8 voltage inputs and 2 limit alarms. Each input has true differential 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 0-10V devices. Appending NTX expansion models can interface up to 32 differential voltage inputs on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2240: Ethernet Analog I/O Modules with 16 Single-ended Voltage Inputs
16 single-ended voltage inputs
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2240 modules offer 16 voltage inputs. Each input supports bipolar and unipolar ranges with 16-bit A/D. NTE Ethernet models provide a compact network interface to monitor sensor levels or 0-10V devices. Appending NTX expansion models can interface up to 64 voltage inputs on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2310: Ethernet Analog Output Modules with 8 Process Current Outputs
8 process current outputs
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2310 modules offer 8 current outputs. Each output is driven by a 16-bit DAC. NTE Ethernet models provide a compact network interface to control 4-20mA loops. Appending NTX expansion models can interface up to 32 current outputs at a single IP address.
NT2320: Ethernet Analog Output Modules with 8 Process Voltage Outputs
8 process voltage outputs
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2320 modules offer 8 voltage outputs. Each output is driven by a 16-bit DAC. NTE Ethernet models provide a compact network interface to control voltage signal levels. Appending NTX expansion models can interface up to 32 voltage outputs at a single IP address.
XT1210: 8-Channel Differential Analog Current Input Module
0-11mA, 0-20mA, 4-20mA, ±20mA, or 0-20 amps AC Input
8 analog differential current input channels
12 to 32V DC Power (2.8W)
Modbus TCP/IP, Ethernet/IP, Profinet
i2o® peer-to-peer available for Modbus TCP/IP only
The XT1210 offers an Ethernet network interface for up to eight differential current input channels. Differential inputs deliver better measurements and superior noise rejection.
NT2620: Ethernet RTD/Resistance Input Modules with Discrete I/O
4 RTD/resistance inputs
2 discrete I/O
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2620 modules offer 4 RTD/resistance inputs and 2 bidirectional discrete digital I/O channels. Each input can support RTD or resistance sensor types. NTE Ethernet models provide a network interface to monitor temperature levels.
Click here to watch a short video highlighting the benefits of the NT1620.
VPM2000 Series: Loop-Powered Isolator / Alarm with Display
Loop-powered Process Meter
4-20mA input/output
Solid-state relays
Non-incendive, intrinsically safe
These loop-powered 1/8 DIN digital panel meters provide a convenient and informative display of any 4-20mA signal. A dual line display shows the process value on the top line and the units or a tag on the bottom line. Alternatively, you can display the input in one scale on the top line (e.g. height) and another scale on the bottom (e.g. volume).
Click here to watch a short video highlighting the VPM2000 Series.
DT237: Medium DC Voltage Input Two-Wire Dual Transmitter
Dual channels
 0-10V, ±10V inputs
4-20mA outputs (sink/source)
7-32V DC loop power
DT230 series signal conditioners provide two independent I/O channels in a single, space-saving unit. The DT237 model is a two-wire dual transmitter that isolates and converts high-level DC voltage inputs to a proportional 4-20mA control signal. Power is received from the output loop current or a DC supply when using a three-wire connection.
Click here to watch a short video highlighting the features of the DT237.
Welcome to our Signal Conditioning Selection Guide Videos. As a business with many helpful products to offer, we know it can be difficult to find which one you need. This quick selection guide should help point you in the right direction. Choose which video corresponds to your power needs, and the guide will show you which Acromag modules will work with your input.