Acromag remote I/O modules feature signal conditioners and network I/OÂ for a broad range of monitoring and control operations where controllers communicate with instrumentation on the plant floor or in the field. Signal Conditioners include signal transmitters, signal isolators, 4-20mA signal splitters, limit alarms and computation modules. These signal conditioners input voltage, current, thermocouple, RTD, frequency, thermistor, load cell, potentiometer, and discrete sensors. These signal conditioners output DC voltage and current, relay, frequency, pulse width modulation and display/readout. Ethernet remote I/O modules communicate via Ethernet/IP, Modbus TCP/IP, Modbus UDP/IP, and Profinet.
Showing 1–16 of 20 results
-
DT235: RTD / Resistance Input Two-Wire Dual Transmitter
- Dual channels
- RTD (Pt, Ni, Cu), 0-4500 ohm inputs
- 4-20mA output (sink/source)
- 7-32V DC loop power
Click here to watch a short video highlighting the features of the DT235.
-
DT335: RTD / Resistance Input Four-wire Dual Transmitter
- Dual channels
- RTD (Pt, Ni, Cu) or 0-4500 ohm input
- 0-20mA, ±10V outputs
- 6-32V DC local/bus power
-
VPM2000 Series: Loop-Powered Isolator / Alarm with Display
- Loop-powered Process Meter
- 4-20mA input/output
- Solid-state relays
- Non-incendive, intrinsically safe
-
TT231: RTD / Resistance Input Two-Wire Transmitter
- 100 ohm Pt RTD or 0-900 ohm input
- 4-20mA output (sink/source)
- 12-32V DC loop/local power
- USB configuration
-
VPM3000 Series: Universal Transmitter / Alarm with Display
- Big, bright display
- 4-20mA, ±10V, thermocouple, or RTD input
- 4-20mA, Modbus serial, or alarm relay output options
-
4001 Serial Cables
5-foot ribbon cable, DB25 male and 26-pin female IDC connectors, for 3B/5B backpanel to Ethernet I/O module connection -
4001-095: USB-to-Serial Adapter
- USB-to-serial adapter
- Easy to use to setup and re-configure modules
-
5030 Cable Series
- 5030-902: IntelliPack Cable
- 5030-913: IntelliPack Serial Port Adapter
-
5035 Series: Ethernet Cables
- Ethernet straight cable, CAT5
- Ethernet crossover cable, CAT5E
- Low EMI Double-Shielded Ethernet Patch Cable
-
657T, 658T: Single or Dual Channel, RTD Input, Loop-powered Transmitter
- 100 ohm Pt, 120 ohm Ni, 10 ohm Cu (selectable type) input
- 4 to 20mA DC output
- 12-50V DC from output loop power
- DIP-switch configuration, push-button calibration
-
800C-SIP: IntelliPack Configuration Software
- Configuration Software
- USB-to-RS232 Adapter
- RS232-to-RJ11 Adapter
- Interface Cable
-
801A Universal TC/RTD/mV Input Intelligent Alarm
- Thermocouple (J, K, T, R, S, E, B, N), RTD (Pt, Ni, Cu), millivolt (±100mV DC), resistance (0 to 500 ohms) input
- Single or dual mechanical relay alarm outputs
- 10-36V DC power
- Software configured
- Multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection)
- On/off controller capability
-
801T: Universal Input Intelligent Temperature Transmitter
- Thermocouple, RTD, milliVolt, and Resistance Input
- 0 to 20mA DC, 0 to 10V DC output
- Limit Alarm
- 10-36V DC power
- Software configured
- Performs linearization, square root extraction, and optional limit alarm functions
-
APM765 Series: Universal Input with Alarm Panel Meter
- Universal input
- Isolated 4-20mA and Modbus output options
- Push-button or PC programmable,
- 85-265V AC or 90-265V DC power, optional 12-24V AC or 12-36V DC power
-
ST131: Transmitter, RTD Input, Loop-Powered
- 100 ohm Pt RTD or 0-900 ohm input
- 4 to 20mA DC output
- 9-32V DC from output loop power
- USB-configured
-
TT235: Isolated RTD Input, Loop Power, 2-Wire Transmitter
- Selectable RTD or linear resistance input type or 0-500 ohm input
- 4-20mA output (sink/source)
- 12-32V DC loop/local power
- USB configuration
Signal Conditioning Selection Guide Videos
Welcome to our Signal Conditioning Selection Guide Videos. As a business with many helpful products to offer, we know it can be difficult to find which one you need. This quick selection guide should help point you in the right direction. Choose which video corresponds to your power needs, and the guide will show you which Acromag modules will work with your input.