Acromag remote I/O modules feature signal conditioners and network I/OÂ for a broad range of monitoring and control operations where controllers communicate with instrumentation on the plant floor or in the field. Signal Conditioners include signal transmitters, signal isolators, 4-20mA signal splitters, limit alarms and computation modules. These signal conditioners input voltage, current, thermocouple, RTD, frequency, thermistor, load cell, potentiometer, and discrete sensors. These signal conditioners output DC voltage and current, relay, frequency, pulse width modulation and display/readout. Ethernet remote I/O modules communicate via Ethernet/IP, Modbus TCP/IP, Modbus UDP/IP, and Profinet.
NT2110: Ethernet Digital I/O Modules with Discrete Active Low Input - Sinking Output
16 discrete I/O
Active low in / sinking out
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2110 modules offer 16 bidirectional discrete I/O channels for low-side (sinking switch) applications. NTE Ethernet models provide a compact network interface to monitor or control discrete device levels. Appending NTX expansion models can interface up to 64 discrete I/O channels on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2120: Ethernet Digital I/O Modules with Discrete Active High Input - Sourcing Output
16 discrete I/O
Active high in / sourcing out
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2120 modules offer 16 bidirectional discrete I/O channels for high-side (sourcing switch) applications. NTE Ethernet models provide a compact network interface to monitor or control discrete device levels. Appending NTX expansion models can interface up to 64 discrete I/O channels on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
NT2130: Ethernet Digital I/O Modules with Mechanical Relays
6 mechanical relay outputs
6 discrete inputs
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2130 modules offer six 5A mechanical relays and six discrete inputs. The NTE Ethernet I/O models provide a compact network interface to monitor and control discrete device levels. Appending NTX expansion models can interface up to 24 relays and 24 level sensing inputs on a single IP address.
Click here to watch a short video highlighting the features of the BusWorks NT Series.
XT1110: 16-Channel Discrete Ethernet I/O Modules with Sinking Outputs
16 discrete tandem input/output channels
Modbus TCP/IP, Ethernet/IP, Profinet, or i2o® communication
The XT1110 interfaces discrete I/O signals between measurement and control devices over Ethernet. Channels are individually configurable for input or low-side switched output operation.
NT2620: Ethernet RTD/Resistance Input Modules with Discrete I/O
4 RTD/resistance inputs
2 discrete I/O
Ethernet I/O plus Expansion I/O
Multi-protocol support
NT2620 modules offer 4 RTD/resistance inputs and 2 bidirectional discrete digital I/O channels. Each input can support RTD or resistance sensor types. NTE Ethernet models provide a network interface to monitor temperature levels.
Click here to watch a short video highlighting the benefits of the NT1620.
XT1120: 16-Channel Discrete Ethernet I/O Modules with Sourcing Outputs
16 discrete tandem input/output channels
Modbus TCP/IP, Ethernet/IP, Profinet, or i20 communication
The XT1120 interfaces discrete I/O signals between measurement and control devices over Ethernet. Channels are individually configurable for input or high-side switched output operation.
VPM3000 Series: Universal Transmitter / Alarm with Display
Big, bright display
4-20mA, ±10V, thermocouple, or RTD input
4-20mA, Modbus serial, or alarm relay output options
Acromag VPM3000 Vertuâ„¢ digital panel meters are among the most versatile on the market and able to operate as a transmitter and/or alarm to satisfy a wide variety of process and temperature applications.
Learn more about the VPM3000 by watching this short video.
Provides two identical outputs from one input signal
These units receive 4-20mA process current inputs and provide isolated 4-20mA output signals. Each channel operates independently and is isolated from the others to prevent interaction between channels. Galvanic isolation eliminates ground loops, reduces noise, and blocks transient signals.
Acromag’s configuration software is the key to the IntelliPack’s easy-to-use operation. The software employs the friendly Windows® interface with pull-down selection menus and fill-in-the-blank fields to speed you through a few brief configuration screens. No programming is required.
801T: Universal Input Intelligent Temperature Transmitter
Thermocouple, RTD, milliVolt, and Resistance Input
0 to 20mA DC, 0 to 10V DC output
Limit Alarm
10-36V DC power
Software configured
Performs linearization, square root extraction, and optional limit alarm functions
These transmitters isolate and convert sensor inputs to noise-free, proportional DC current or voltage output signals. An optional relay output adds a local limit alarm function.
951EN, 952EN: Ethernet Analog and Discrete I/O Modules
4 analog inputs
2 analog output
6 discrete I/O channels
Ethernet/IP, Modbus TCP/IP
i2o peer-to-peer available for Modbus TCP/IP only
These modules provide an isolated Ethernet network interface for analog and discrete I/O signals. Multi-range analog inputs and outputs support a wide variety of industrial devices. High-resolution, low noise, A/D and D/A converters deliver high accuracy and reliability.
i2o peer-to-peer available for Modbus TCP/IP 6-channel only
These modules provide an isolated Ethernet network interface for up to six input channels. Differential inputs eliminate ground noise and each terminal block includes a cold junction compensation (CJC) sensor for more precise temperature measurements. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability.
i2o peer-to-peer available for Modbus TCP/IP 6-channel only
These modules provide an isolated Ethernet network interface for up to six input channels. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability. Three-way isolation further improves the system performance.
These modules provide an isolated Ethernet network interface for twelve discrete input and/or output channels. The outputs provide direct on/off, high/low, or open/close control of industrial devices. The inputs sense the status of motors, pumps, valves and other equipment. The 983EN model with tandem I/O provides output level control and status verification in one unit.
981PB, 982PB, 983PB: Profibus-DP 12-Channel Digital I/O
Active-Low Inputs, Sinking Outputs
12 input channels, 0 to 35V DC range
12 to 36V DC
High-speed RS-485
These modules provide an isolated Profibus-DP network interface for twelve discrete input and/or output channels. The outputs provide direct on/off, high/low, or open/close control of industrial devices.
Welcome to our Signal Conditioning Selection Guide Videos. As a business with many helpful products to offer, we know it can be difficult to find which one you need. This quick selection guide should help point you in the right direction. Choose which video corresponds to your power needs, and the guide will show you which Acromag modules will work with your input.