Acromag remote I/O modules feature signal conditioners and network I/OÂ for a broad range of monitoring and control operations where controllers communicate with instrumentation on the plant floor or in the field. Signal Conditioners include signal transmitters, signal isolators, 4-20mA signal splitters, limit alarms and computation modules. These signal conditioners input voltage, current, thermocouple, RTD, frequency, thermistor, load cell, potentiometer, and discrete sensors. These signal conditioners output DC voltage and current, relay, frequency, pulse width modulation and display/readout. Ethernet remote I/O modules communicate via Ethernet/IP, Modbus TCP/IP, Modbus UDP/IP, and Profinet.
Showing 1–16 of 18 results
-
TT336: Current/milliVolt Input, DC Power Transmitter
- Multi-range ±20mA or ±500mV input
- Universal current/voltage output
- 12-32V DC power
-
4001 Serial Cables
5-foot ribbon cable, DB25 male and 26-pin female IDC connectors, for 3B/5B backpanel to Ethernet I/O module connection -
4001-095: USB-to-Serial Adapter
- USB-to-serial adapter
- Easy to use to setup and re-configure modules
-
5030 Cable Series
- 5030-902: IntelliPack Cable
- 5030-913: IntelliPack Serial Port Adapter
-
5035 Series: Ethernet Cables
- Ethernet straight cable, CAT5
- Ethernet crossover cable, CAT5E
- Low EMI Double-Shielded Ethernet Patch Cable
-
631T, 632T: Single / Dual Channel Isolator
- 4 to 20mA DC input
- 4 to 20mA DC output
- 12-36V DC SELV, 90-250V AC power
- Single or dual I/O with a dual output model and full isolation
-
633T: AC/DC-Powered Signal Splitter
- Single input, dual output (splitter)
- 12-36V DC SELV, 90-250V AC
- Provides two identical outputs from one input signal
-
951EN, 952EN: Ethernet Analog and Discrete I/O Modules
- 4 analog inputs
- 2 analog output
- 6 discrete I/O channels
- Ethernet/IP, Modbus TCP/IP
- i2o peer-to-peer available for Modbus TCP/IP only
-
NT2510 and NT2530: Ethernet Multi-Function I/O Modules
- 4 analog inputs
- 2 analog outputs
- 4 discrete I/O
- Ethernet I/O plus Expansion I/O
- Multi-protocol support
-
SP333: Four-Wire Thermocouple / milliVolt Splitter
- Universal thermocouple or ±100mV input
- 0-20mA, ±10V or 0-10V outputs
- 6-32V DC external power
-
SP336: Four-Wire Current / milliVolt Signal Splitter
- DC current and low voltage input
- 0-20mA, ±10V outputs
- 6-32V DC external power
-
SP337: Four-wire Process Voltage Input Signal Splitter
- Multi-range ±1V, ±5V, or ±10V input
- 0-20mA, ±10V or 0-10V outputs
- 6-32V DC external power
-
SP338: Four-Wire High Voltage Input Signal Splitter
- Multi-range ±15, ±75, or ±150V input
- 0-20mA, ±10V or 0-10V outputs
- 6-32V DC external power
-
TT234: Potentiometer / Thermistor Input, Two-Wire Transmitter
- Potentometer / slidewire, thermister input
- 4 to 20mA output (sink / source)
- 12-32V DC loop / local power
- USB configuration
-
USB Cables
4001-112: USB cable, 1 meter, with Type A to Type B plugs. 4001-113: USB cable, 1 meter, with Type A to Mini-B plugs. 5028-565: USB-OTG cable, 6 inches -
USB-to-Ethernet Adapter
Simplifies configuration of Acromag Ethernet I/O Modules Prevents disruption of existing LANs This device is a USB-to-Ethernet adapter that you can use to communicate with any Acromag Ethernet I/O product for the purpose of setup and re-configuration for your application. It is recommended for initial communication with Acromag Ethernet devices so that you do not have to disrupt your existing network connection.
Signal Conditioning Selection Guide Videos
Welcome to our Signal Conditioning Selection Guide Videos. As a business with many helpful products to offer, we know it can be difficult to find which one you need. This quick selection guide should help point you in the right direction. Choose which video corresponds to your power needs, and the guide will show you which Acromag modules will work with your input.