Acromag remote I/O modules feature signal conditioners and network I/O for a broad range of monitoring and control operations where controllers communicate with instrumentation on the plant floor or in the field. Signal Conditioners include signal transmitters, signal isolators, 4-20mA signal splitters, limit alarms and computation modules. These signal conditioners input voltage, current, thermocouple, RTD, frequency, thermistor, load cell, potentiometer, and discrete sensors. These signal conditioners output DC voltage and current, relay, frequency, pulse width modulation and display/readout. Ethernet remote I/O modules communicate via Ethernet/IP, Modbus TCP/IP, Modbus UDP/IP, and Profinet.
The DT233 model is a dual two-wire transmitter that isolates and converts millivolt or thermocouple sensor inputs to proportional 4-20mA control signals. Power is received from the output loop current.
TT236: Current / milliVolt Input Two-Wire Transmitter
Multi-range ±20mA or ±500mV input
4-20mA ouput (sink/source)
12-32 V DC loop/local power
The TT236 model is a space-saving two-wire transmitter that isolates and converts a DC current or low voltage input to a proportional 4-20mA control signal. A single unit supports both voltage and current input for extra flexibility. Power is received from the output loop current or a DC supply when using a three-wire connection.
Click here to watch a short AcroMaggie video highlighting the TT230 Series.
611T, 612T: Single or Dual Channel, DC Voltage/Current Input, DC-Powered Transmitters
±100V DC, 0 to 100mA DC, 0 to 20A AC (with optional sensor) input
0 to 20mA, 0 to 10V DC output
10-36V DC power
Universal DC I/O transmitters with auto-configuration and self-ranging capabilities
These units receive DC current or voltage input signals, provide isolation, and output proportional DC current or voltage signals. With support for universal DC I/O ranges, 610T series transmitters provide a solution for a wide variety of isolation and signal conversion tasks.
924MB: Thermocouple/milliVolt Modbus-RTU Input Module with Limit Alarms
4 input channels, thermocouple (types J, K, T, R, S, E, B, N) or millivolt (±100mV DC) input
4 alarm channels, open drain MOSFETS (1A DC loads, 0 to 35V DC)
10 to 36V DC, 24V AC power
Modbus-RTU high-speed RS-485
This signal conditioner is a four-channel analog input module with four discrete outputs. It filters and linearizes thermocouple inputs while providing isolation between input, output, power, and network circuits. Cold junction compensation and upscale/downscale sensor break detection are standard.
The ST132 is a low-cost two-wire transmitter that converts a millivolt or thermocouple sensor input to a proportional 4-20mA control signal. Power is received from the output loop current. The transmitter performs signal linearization, cold-junction compensation, and lead-break detection functions.
Welcome to our Signal Conditioning Selection Guide Videos. As a business with many helpful products to offer, we know it can be difficult to find which one you need. This quick selection guide should help point you in the right direction. Choose which video corresponds to your power needs, and the guide will show you which Acromag modules will work with your input.