Acromag remote I/O modules feature signal conditioners and network I/OÂ for a broad range of monitoring and control operations where controllers communicate with instrumentation on the plant floor or in the field. Signal Conditioners include signal transmitters, signal isolators, 4-20mA signal splitters, limit alarms and computation modules. These signal conditioners input voltage, current, thermocouple, RTD, frequency, thermistor, load cell, potentiometer, and discrete sensors. These signal conditioners output DC voltage and current, relay, frequency, pulse width modulation and display/readout. Ethernet remote I/O modules communicate via Ethernet/IP, Modbus TCP/IP, Modbus UDP/IP, and Profinet.
Showing all 15 results
-
TT236: Current / milliVolt Input Two-Wire Transmitter
- Multi-range ±20mA or ±500mV input
- 4-20mA ouput (sink/source)
- 12-32 V DC loop/local power
-
DT236: Current / milliVolt Input Two-Wire Dual Transmitter
- Â Dual channels
-  ±20mA, ±500mV inputs
- 4-20mA outputs (sink/source)
- 7-32V DC loop power
-
VPM2000 Series: Loop-Powered Isolator / Alarm with Display
- Loop-powered Process Meter
- 4-20mA input/output
- Solid-state relays
- Non-incendive, intrinsically safe
-
651T, 652T: Multi-Channel, Two-Wire Isolators
- DC current input
- Single/dual-channel DC-powered isolators
-
671T, 672T, 674T: Multi-Channel, Two-Wire Isolators
- DC current input
- Single, dual, or quad I/O loop-powered isolators
-
841T: DC Frequency/Pulse Input Intelligent Transmitter
- 0 to 50KHz, 0 to 65535 pulses input
- 0 to 20mA DC, 0 to 10V DC output
- Mechanical alarm relay (25V @ 5A)
- 10-36V DC power
- Software configured; pulse counter; signal averaging; optional limit alarm functions
-
900EN: 5-Port Ethernet Switch
- 10/100Mbps
- 15 to 36V DC power supply required
- Five shielded RJ-45 sockets, 8-pin, 10Base-T / 100Base-TX
-
942MB: Frequency/Pulse Counter Modbus-RTU Input Modules with Periodic or Pulse Waveform Input
- 2 input channels, 0 to 50KHz in 3 selectable ranges: Amplitudes up to 140V AC peak, Amplitudes up to 200V peak, Pulse counter range of 0 to 65535
- Solid-state discrete output relays (1A DC loads), 0 to 48V DC
- 10 to 36V DC, 24V AC power
- Modbus-RTU high-speed RS-485
-
Digital Display Panel Meter Accessories
- Plastic enclosure
- Pipe-mount kit
- Cables
- Adapters
-
LNX-0702G: 7-Port Gigabit Ethernet with SFP Fiber Ports
- 5-Port 10/100/1000TX and 2-port 100/1000 Fx SFP Slots
- Auto MDI/MDI-X Function
- 10Gbps Back-Plane
-
TT351: Strain Gauge Load Cell Signal Conditioner
- Strain gauge/load cell input
- Universal current/voltage output
- 9-32V DC local/bus power
-
250T-DC, 350T-DC, 450T-DC: Analog Transmitter; AC-, DC- or Loop-Powered, DIN Rail-Mount
- DC voltage or DC current input
- DC voltage or DC current output
- Loop or DC or AC power
- Excellent accuracy and stability ensure reliable measurements in harsh industrial environments. Input isolated from output/power
-
270i: Input Loop-Power Isolator
- 4-20mA DC input
- 4-20mA DC output
- 12 to 50V DC @ 20mA (loop-powered)
- 1500V AC peak isolation DC prevents ground loops
-
4683 Series: RS485-to-RS485 Network Repeater
- Designed for use with Johnson Controls N2 or BACnet MS/TP bus
- 115V AC ±10%, 50/60 Hz, 0.05A or 230V AC ±10%, 50/60 Hz, 0.03A or 24V AC ±10%, 50/60 Hz, 0.18A typical power
- Operating temperature: -25 to 70° C (-13 to 158° F)
Signal Conditioning Selection Guide Videos
Welcome to our Signal Conditioning Selection Guide Videos. As a business with many helpful products to offer, we know it can be difficult to find which one you need. This quick selection guide should help point you in the right direction. Choose which video corresponds to your power needs, and the guide will show you which Acromag modules will work with your input.