Acromag remote I/O modules feature signal conditioners and network I/OÂ for a broad range of monitoring and control operations where controllers communicate with instrumentation on the plant floor or in the field. Signal Conditioners include signal transmitters, signal isolators, 4-20mA signal splitters, limit alarms and computation modules. These signal conditioners input voltage, current, thermocouple, RTD, frequency, thermistor, load cell, potentiometer, and discrete sensors. These signal conditioners output DC voltage and current, relay, frequency, pulse width modulation and display/readout. Ethernet remote I/O modules communicate via Ethernet/IP, Modbus TCP/IP, Modbus UDP/IP, and Profinet.
Showing all 15 results
-
TT236: Current / milliVolt Input Two-Wire Transmitter
- Multi-range ±20mA or ±500mV input
- 4-20mA ouput (sink/source)
- 12-32 V DC loop/local power
-
DT236: Current / milliVolt Input Two-Wire Dual Transmitter
- Â Dual channels
-  ±20mA, ±500mV inputs
- 4-20mA outputs (sink/source)
- 7-32V DC loop power
-
VPM2000 Series: Loop-Powered Isolator / Alarm with Display
- Loop-powered Process Meter
- 4-20mA input/output
- Solid-state relays
- Non-incendive, intrinsically safe
-
651T, 652T: Multi-Channel, Two-Wire Isolators
- DC current input
- Single/dual-channel DC-powered isolators
-
671T, 672T, 674T: Multi-Channel, Two-Wire Isolators
- DC current input
- Single, dual, or quad I/O loop-powered isolators
-
900EN: 5-Port Ethernet Switch
- 10/100Mbps
- 15 to 36V DC power supply required
- Five shielded RJ-45 sockets, 8-pin, 10Base-T / 100Base-TX
-
951EN, 952EN: Ethernet Analog and Discrete I/O Modules
- 4 analog inputs
- 2 analog output
- 6 discrete I/O channels
- Ethernet/IP, Modbus TCP/IP
- i2o peer-to-peer available for Modbus TCP/IP only
-
LNX-0702G: 7-Port Gigabit Ethernet with SFP Fiber Ports
- 5-Port 10/100/1000TX and 2-port 100/1000 Fx SFP Slots
- Auto MDI/MDI-X Function
- 10Gbps Back-Plane
-
NT2510 and NT2530: Ethernet Multi-Function I/O Modules
- 4 analog inputs
- 2 analog outputs
- 4 discrete I/O
- Ethernet I/O plus Expansion I/O
- Multi-protocol support
-
ST13C-SIP
- Configuration software
- USB isolator
- Two USB cables
- One kit recommended per customer
-
TTC-SIP: Software
- Software Interface Package for Acromag DT, ST, TT Series Transmitters and SP, uBSP Series Signal Splitters.
- Includes configuration sofware CD-ROM (5040-xxx), isolator (USB-ISOLATOR) and two USB cable (4001-112, 4001-113) (Recommend one kit per customer.)
- Easy setup and digital calibration via USB with Windows configuration software.
- Download the configuration software only - from the Software Tab
-
250T-DC, 350T-DC, 450T-DC: Analog Transmitter; AC-, DC- or Loop-Powered, DIN Rail-Mount
- DC voltage or DC current input
- DC voltage or DC current output
- Loop or DC or AC power
- Excellent accuracy and stability ensure reliable measurements in harsh industrial environments. Input isolated from output/power
-
270i: Input Loop-Power Isolator
- 4-20mA DC input
- 4-20mA DC output
- 12 to 50V DC @ 20mA (loop-powered)
- 1500V AC peak isolation DC prevents ground loops
-
4683 Series: RS485-to-RS485 Network Repeater
- Designed for use with Johnson Controls N2 or BACnet MS/TP bus
- 115V AC ±10%, 50/60 Hz, 0.05A or 230V AC ±10%, 50/60 Hz, 0.03A or 24V AC ±10%, 50/60 Hz, 0.18A typical power
- Operating temperature: -25 to 70° C (-13 to 158° F)
Signal Conditioning Selection Guide Videos
Welcome to our Signal Conditioning Selection Guide Videos. As a business with many helpful products to offer, we know it can be difficult to find which one you need. This quick selection guide should help point you in the right direction. Choose which video corresponds to your power needs, and the guide will show you which Acromag modules will work with your input.