Acromag remote I/O modules feature signal conditioners and network I/OÂ for a broad range of monitoring and control operations where controllers communicate with instrumentation on the plant floor or in the field. Signal Conditioners include signal transmitters, signal isolators, 4-20mA signal splitters, limit alarms and computation modules. These signal conditioners input voltage, current, thermocouple, RTD, frequency, thermistor, load cell, potentiometer, and discrete sensors. These signal conditioners output DC voltage and current, relay, frequency, pulse width modulation and display/readout. Ethernet remote I/O modules communicate via Ethernet/IP, Modbus TCP/IP, Modbus UDP/IP, and Profinet.
Showing 1–16 of 24 results
-
TT236: Current / milliVolt Input Two-Wire Transmitter
- Multi-range ±20mA or ±500mV input
- 4-20mA ouput (sink/source)
- 12-32 V DC loop/local power
-
DT236: Current / milliVolt Input Two-Wire Dual Transmitter
- Â Dual channels
-  ±20mA, ±500mV inputs
- 4-20mA outputs (sink/source)
- 7-32V DC loop power
-
NT2610: Ethernet Thermocouple milliVolt Input Modules with Discrete I/O
- 8 thermocouple / mV inputs
- 2 discrete I/O
- Ethernet I/O plus Expansion I/O
- Multi-protocol support
-
NT2620: Ethernet RTD/Resistance Input Modules with Discrete I/O
- 4 RTD/resistance inputs
- 2 discrete I/O
- Ethernet I/O plus Expansion I/O
- Multi-protocol support
-
VPM2000 Series: Loop-Powered Isolator / Alarm with Display
- Loop-powered Process Meter
- 4-20mA input/output
- Solid-state relays
- Non-incendive, intrinsically safe
-
5034-186: Configuration Software CD-ROM
- Configuration software CD
-
651T, 652T: Multi-Channel, Two-Wire Isolators
- DC current input
- Single/dual-channel DC-powered isolators
-
671T, 672T, 674T: Multi-Channel, Two-Wire Isolators
- DC current input
- Single, dual, or quad I/O loop-powered isolators
-
811A, 812A: Intelligent Alarm; DC Voltage/Current Input
- ±100V or 0 to 22mA DC input ranges or 2 input channels, ±100V or 0 to 22mA DC input ranges (AC current with optional sensor)
- Single or dual mechanical relays
- 10-36V DC power
- Software configured; multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection); on/off controller capability
-
900C-SIP: Configuration Software Interface Package
- Configuration Software
- USB-to-RS232 Adapter
- RS232-to-RS485 Adapter
- Interface Cable
-
900EN: 5-Port Ethernet Switch
- 10/100Mbps
- 15 to 36V DC power supply required
- Five shielded RJ-45 sockets, 8-pin, 10Base-T / 100Base-TX
-
913MB, 914MB: DC Current/Voltage Modbus-RTU Input Module with Limit Alarms
- 4 input channels
- 0 to 20mA DC (0 to 20A AC with AC sensor) or ±10V DC input range
- 4 alarm channels, open drain MOSFETS (1A DC loads, 0 to 35V DC)
- 10 to 36V DC, 24V AC power
- Modbus RTU high-speed RS-485
-
965EN: Ethernet Thermocouple milliVolt Input Modules
- 4 or 6-channel thermocouple/milliVolt input
- Ethernet/IP, Modbus TCP/IP
- i2o peer-to-peer available for Modbus TCP/IP 6-channel only
-
966EN: Ethernet RTD Resistance Input Modules
- 4 or 6-channel RTD/resistance input
- Ethernet/IP, Modbus TCP/IP
- i2o peer-to-peer available for Modbus TCP/IP 6-channel only
-
AMTN, AMTX: ActiveX / .NET Controls for Modbus I/O
- Modbus/TCP or Modbus/RTU
- These ActiveX / .NET software controls provide a fast, easy way to communicate with any Modbus slave devices connected to your PC.
- Get your Visual Basic, Visual C, .NET, Excel, or other compatible applications talking Modbus protocol within minutes.
Signal Conditioning Selection Guide Videos
Welcome to our Signal Conditioning Selection Guide Videos. As a business with many helpful products to offer, we know it can be difficult to find which one you need. This quick selection guide should help point you in the right direction. Choose which video corresponds to your power needs, and the guide will show you which Acromag modules will work with your input.