These isolators provide 3-way isolation to separate input, output, and power circuits. They are the safest choice when retrofitting or expanding systems where instrument isolation or the grounding schemes are unknown. These 3-way isolators source current out and do not utilize a separate output power supply. The outputs are designed to drive purely resistive loads. The isolator can be located several or hundreds of feet away from the PLC/DCS and obtain power from an external AC or DC source. This source may have a different ground potential than the PLC/DCS or field device. In this case, the power ground must be isolated from both the input and output. Across long distances, the ground potential at a sensor is likely different from the power source and PLC/DCS. Consequently, input to output isolation is also necessary. Additionally, these units can isolate 4-20mA control outputs from the PLC/DCS to field actuators. In the case of analog outputs, the PLC/DCS output is wired to the isolator input and the isolator output is wired to the field device/actuator.

Showing all 4 results

  • Compare

    TT336: Current / milliVolt Input, DC Power Transmitter

    • Multi-range ±20mA or ±500mV input
    • Universal current/voltage output
    • 12-32V DC power
    DC current and voltage output are both supported on a single model. An optional DIN rail bus can deliver primary or redundant power to multiple units without wiring. Click here to watch a short video highlighting the TT330 Series.  
    Select options
  • Compare

    631T, 632T: Single / Dual Channel Isolator

    • 4 to 20mA DC input
    • 4 to 20mA DC output
    • 12-36V DC SELV, 90-250V AC power
    • Single or dual I/O with a dual output model and full isolation
    These units receive 4-20mA process current inputs and provide isolated 4-20mA output signals. Each channel operates independently and is isolated from the others to prevent interaction between channels. Galvanic isolation eliminates ground loops, reduces noise, and blocks transient signals.
    Select options
  • Compare

    330i: DC-Powered Isolator

    • 4 to 20mA DC input
    • 4 to 20mA DC output
    • 10-36V DC power
    • Three-way isolation
    Select options
  • Compare

    430i: AC-Powered Isolator

    • 4 to 20mA DC input
    • 4 to 20mA DC output
    • 115V AC or 230V AC power
    • Three-way isolation
    • Zero and span adjustment enable precise calibration
    Select options