XMC Carrier Cards

• 8-lane PCI Express interface
• Holds one XMC module

The APCe8675 is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted XMC module. It simply acts as an adapter to route signals between the system’s PCIe bus and the XMC module connector.

• One XMC mezzanine module slot
• 3/4-length
• Non-Intelligent carrier card
• PCIe x8 interface

Acromag’s APCe8775 carrier card interfaces an XMC mezzanine module to a PCI Express bus in a PC-based desktop computer system.

• PCIe x16 Gen 3 interface via Expansion plane
• One XMC and Four AcroPack slots
• 6U form factor

The VPX4520 carrier card provides a simple and cost-effective solution for interfacing one XMC and four AcroPack modules to a VPX computer system. Click here to watch a short AcroMaggie video highlighting the VPX4520 features.  

• PCIe x16 Gen 3 interface via Data plane
• One XMC and Four AcroPack slots
• 6U form factor

The VPX4521 is a member of a 6U OpenVPX mezzanine carrier card family that supports a simple and cost-effective solution for interfacing XMC or AcroPack modules to OpenVPX computer systems. Click here to watch a short AcroMaggie video highlighting the VPX4521 features.    

• Air-cooled, conduction-cooled, REDI versions
• 3U single PMC/XMC slot
• PCIe x8 Gen 2 interface

These 3U mezzanine carrier cards provide a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system. The carrier card routes power and bus signals to a plug-in mezzanine module through the VPX card slot connector.

• Air-cooled, conduction-cooled and REDI versions
• 3U Single XMC slot
• PCIe x8 Gen 2 interface

The VPX4812A can be used as a VPX switch card allowing a host CPU to communicate with up to 3 downstream cards in addition to the XMC card. Each VPX port can be configured to be x4 or x8. The VPX4814A is a peripheral XMC carrier board designed to be used in a system that uses a VPX AcroExpress® CPU.  

• Air-cooled and conduction-cooled versions
• 6U dual PMC/XMC slots
• PCIe bus 16-lane Gen 1 or 2 interface switch on data plane

The VPX4821A carrier card provides a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system. Connect to the OpenVPX™ via Data plane for a direct PCIe connection over the VPX backplane. This allows host processors access to a high-performance, low latency interconnect to the PMC and XMC modules on the carrier card.

• Two XMC slots
• PCIe x16 Gen 3 interface via Expansion or Data plane
• Air or Conduction-cooled
• Supports the Jn6 differential signals and legacy I/O from Jn4

The VPX4840 carrier cards provide a simple and cost-effective solution for interfacing an XMC module to a VPX computer system. They offer host processors low latency access to the XMC modules through high-speed interconnects on the carrier card.

• Two XMC slots
• PCIe x16 Gen 3 interface via Expansion or Data plane
• Air or Conduction-cooled
• Supports full Jn6 rear I/O

The VPX4850 carrier cards provide a simple and cost-effective solution for interfacing XMC modules to a VPX computer system. They offer host processors low latency access to the XMC modules through high-speed interconnects on the carrier card.

• Two AcroPack or mini-PCIe mezzanine module slots
• Non-Intelligent carrier card
• PCIe x4 interface

This board interfaces two AcroPack mezzanine modules to a PCI Express bus on an air-cooled XMC carrier. Two AcroPack module slots give you the freedom to mix a variety of I/O functions (A/D, D/A, digital in, digital out, serial I/O, etc.) on a single board.