Communication I/O Support for PCIe Carriers

• Four RS232 serial ports
• Extended temperature
• PCIe Bus interface

The AP500 modules provide four asynchronous serial communication interfaces for your system. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. Full signal support for modem control is also included. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.

• Four isolated full duplex RS422b serial ports (supports RS485)
• Extended temperature
• PCIe Bus interface

AP512 modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP512.

• Four Isolated RS232 Serial Ports
• Extended Temperature
• PCIe Bus Interface

These modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.

• Eight RS232 serial ports
• Extended temperature
• PCIe Bus interface

The AP520 modules provide eight asynchronous serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP520 Series.

• Eight RS422/485 serial ports
• Extended temperature
• PCIe Bus interface

These modules provide eight asynchronous serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.

• Four CAN bus channels with isolation
• CAN 2.0A/B
• ARINC 825
• CANaerospace

AP560A modules provide four independent CAN bus interface channels. Each channel has a Holt H13111 CAN controller with an ADM3053 transceiver. The advantage of this design is that it has the ability to transmit, receive and perform message filtering on extended and standard messages. Click here to watch a short video highlighting the features of Acromag’s Acropack Series.

• One dual redundant MIL-STD-1553 channel
• Extended temperature
• PCIe bus interface

AP570 modules provide a dual redundant MIL-STD-1553 channel with four open/ground avionics level ( 35V) discrete I/O signals in addition to IRIG-B input and Trigger I/O. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.

• 1Gb Ethernet
• Optional Power Over Ethernet
• PCIe bus interface

The AP580E-POE-LF offers an option which makes the AP580E a power sourcing equipment device (PSE) that provides 52V DC up to 10 watts of power to powered devices (PD) such as a video camera and VOIP phones or any other PD device. Click here to watch a video highlighting AcroPack features.

• Four asynchronous EIA/TIA-422B (EIA-485) serial ports
• FIFO buffers (16, 64, or 128-byte)
• Interrupt support
• Programmable baud rate (up to 512Kbps)

Consult factory for long-term availability.

• Four asynchronous EIA-485 serial ports
• 16-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 512Kbps)

Consult factory for long-term availability.

• Four asynchronous EIA/TIA-422B isolated serial ports
• 16 or 64-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 512Kbps)

Consult factory for long-term availability.

• Four asynchronous EIA-485 isolated serial ports
• 16 or 64-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 512Kbps)

Consult factory for long-term availability.

• Eight asynchronous EIA/TIA-232E serial ports
• 64-byte FIFO buffers
• Interrupt support
• Programmable baud rate (up to 230Kbps)

Consult factory for long-term availability.