The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing all 16 results

  • Compare

    AVME9660A: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • 50-pin front panel header connectors
    • Supports two interrupt channels per IP
    • Standard IP module interface
    The AVME9660A is a non-intelligent slave board that interfaces Industry Pack (IP) modules to the VMEbus.
    Select options
  • Compare

    AcPC8625A: Nonintelligent 6U cPCI IP Carrier Card

    • Four IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8625A is a nonintelligent slave board that interfaces four IP modules to the CompactPCI (cPCI) bus.
    Select options
  • Compare

    AcPC8630A: Nonintelligent 3U cPCI IP Carrier, Front I/O

    • Two IP module slots
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8630A is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.  
    Select options
  • Compare

    AcPC8635A: Nonintelligent 3U cPCI IP Carrier Board, Rear I/O

    • Two IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8635A is a non-intelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.
    Select options
  • Compare

    APC8620A: Non-intelligent PCI Bus Carrier for IP Modules

    • Holds five IP modules
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system.
    Select options
  • Compare

    APC8621A: Non-intelligent PCI Bus Carrier, Half-Length

    • Nonintelligent PCI bus carrier
    • Holds three IP modules
    • Plug-and-play carrier configuration and interrupt support
    • Two interrupt channels per IP module
    • Supervisory circuit reset generation
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. The half-length card is ideal for use in smaller PC chassis.
    Select options
  • Compare

    APCe8650: Non-intelligent PCI Express Bus Carrier

    • Non-intelligent PCIe bus carrier
    • Holds four IP modules
    • Plug-and-play carrier configuration and interrupt (MSI and INTA#) support
    • Two interrupt channels per IP module
    • Supervisory circuit reset generation
    This board interfaces standard Industry Pack (IP) mezzanine modules to a PCI Express bus on a PC-based computer system.
    Select options
  • Compare

    APCe8675: Non-intelligent carrier card

    • 8-lane PCI Express interface
    • Holds one XMC module
    The APCe8675 is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted XMC module. It simply acts as an adapter to route signals between the system’s PCIe bus and the XMC module connector.
    Select options
  • Compare

    APCe8775: PCI Express Carrier Card for XMC Modules

    • One XMC mezzanine module slot
    • 3/4-length
    • Non-Intelligent carrier card
    • PCIe x8 interface
    Acromag’s APCe8775 carrier card interfaces an XMC mezzanine module to a PCI Express bus in a PC-based desktop computer system.
    Select options
  • Compare

    AVME9668: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • Front panel SCSI-2 connectors
    • Supports 8MHz and 32MHz IP clocks
    • Supports two interrupt channels per IP
    Consult factory for long-term availability. The AVME9668 is a non-intelligent slave board that interfaces IP modules to the VMEbus.
    Select options
  • Compare

    AVME967xA: VME64 Carriers with Optional Geographical Addressing

    • Non-intelligent VME64x IP carrier
    • Holds two or four IP modules
    • VME64 high-density rear connectors
    • Geographical or user-defined addressing
    The AVME9670A and AVME9675A are non-intelligent slave boards that interface up to four IP modules to the VMEbus.
    Select options
  • Compare

    VPX4812A / VPX4814A: VPX Carrier Cards for XMC Modules

    • Air-cooled, conduction-cooled and REDI versions
    • 3U Single XMC slot
    • PCIe x8 Gen 2 interface
    The VPX4812A can be used as a VPX switch card allowing a host CPU to communicate with up to 3 downstream cards in addition to the XMC card. Each VPX port can be configured to be x4 or x8. The VPX4814A is a peripheral XMC carrier board designed to be used in a system that uses a VPX AcroExpress® CPU.  
    Select options
  • Compare

    VPX4821A: VPX Carrier Cards for XMC or PMC Modules

    • Air-cooled and conduction-cooled versions
    • 6U dual PMC/XMC slots
    • PCIe bus 16-lane Gen 1 or 2 interface switch on data plane
    The VPX4821A carrier card provides a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system. Connect to the OpenVPXâ„¢ via Data plane for a direct PCIe connection over the VPX backplane. This allows host processors access to a high-performance, low latency interconnect to the PMC and XMC modules on the carrier card.
    Select options
  • Compare

    VPX4840 Series: 6U VPX Carrier Cards for XMC Modules

    • Two XMC slots
    • PCIe x16 Gen 3 interface via Expansion or Data plane
    • Air or Conduction-cooled
    • Supports the Jn6 differential signals and legacy I/O from Jn4
    The VPX4840 carrier cards provide a simple and cost-effective solution for interfacing an XMC module to a VPX computer system. They offer host processors low latency access to the XMC modules through high-speed interconnects on the carrier card.
    Select options
  • Compare

    VPX4850 Series: 6U VPX Carrier Cards for XMC Modules

    • Two XMC slots
    • PCIe x16 Gen 3 interface via Expansion or Data plane
    • Air or Conduction-cooled
    • Supports full Jn6 rear I/O
    The VPX4850 carrier cards provide a simple and cost-effective solution for interfacing XMC modules to a VPX computer system. They offer host processors low latency access to the XMC modules through high-speed interconnects on the carrier card.
    Select options
  • Compare

    XMCAP2000: XMC Carrier Card for AcroPack® Modules

    • Two AcroPack or mini-PCIe mezzanine module slots
    • Non-Intelligent carrier card
    • PCIe x4 interface
    This board interfaces two AcroPack mezzanine modules to a PCI Express bus on an air-cooled XMC carrier. Two AcroPack module slots give you the freedom to mix a variety of I/O functions (A/D, D/A, digital in, digital out, serial I/O, etc.) on a single board.  
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems