The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 17 results

  • Compare

    AP500: Quad Serial RS232 Communication Module

    • Four RS232 serial ports
    • Extended temperature
    • PCIe Bus interface
    The AP500 modules provide four asynchronous serial communication interfaces for your system. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. Full signal support for modem control is also included. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Select options
  • Compare

    AP512: Quad Isolated Serial RS422b/485 Communication Module

    • Four isolated full duplex RS422b serial ports (supports RS485)
    • Extended temperature
    • PCIe Bus interface
    AP512 modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP512.
    Select options
  • Compare

    AP513: Quad Isolated Serial RS232 Communication Module

    • Four Isolated RS232 Serial Ports
    • Extended Temperature
    • PCIe Bus Interface
    These modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Select options
  • Compare

    AP520: Octal Serial RS232 Communication Module

    • Eight RS232 serial ports
    • Extended temperature
    • PCIe Bus interface
    The AP520 modules provide eight asynchronous serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP520 Series.
    Select options
  • Compare

    AP522: Octal Serial RS422/485 Communication Module

    • Eight RS422/485 serial ports
    • Extended temperature
    • PCIe Bus interface
    These modules provide eight asynchronous serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Select options
  • Compare

    AP560A: Isolated CAN Bus Interface Module

    • Four CAN bus channels with isolation
    • CAN 2.0A/B
    • ARINC 825
    • CANaerospace
    AP560A modules provide four independent CAN bus interface channels. Each channel has a Holt H13111 CAN controller with an ADM3053 transceiver. The advantage of this design is that it has the ability to transmit, receive and perform message filtering on extended and standard messages. Click here to watch a short video highlighting the features of Acromag’s Acropack Series.
    Select options
  • Compare

    AP570: MIL-STD-1553 Communication Module

    • One dual redundant MIL-STD-1553 channel
    • Extended temperature
    • PCIe bus interface
    AP570 modules provide a dual redundant MIL-STD-1553 channel with four open/ground avionics level ( 35V) discrete I/O signals in addition to IRIG-B input and Trigger I/O. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Read more
  • Compare

    AP580: 1Gb Ethernet with Optional Power over Ethernet Module

    • 1Gb Ethernet
    • Optional Power Over Ethernet
    • PCIe bus interface
    The AP580E-POE-LF offers an option which makes the AP580E a power sourcing equipment device (PSE) that provides 52V DC up to 10 watts of power to powered devices (PD) such as a video camera and VOIP phones or any other PD device. Click here to watch a video highlighting AcroPack features.
    Select options
  • Compare

    APC330: PCI Analog Input Board

    • 16D/32SE channels (±5V, ±10V, 0-5V, and 0-10V input ranges)
    • 16-bit A/D converter
    • 8µS conversion time (125KHz)
    APC330 boards provide fast, high resolution A/D conversion.
    Select options
  • Compare

    IP220A: Analog Output Industry Pack Module, 12-bit D/A

    • 8 or 16 voltage output channels
    • Independent D/A converter on each channel
    • 11µS settling time
    • ±10V output range
    The IP220A outputs analog voltage signals to drive up to 16 devices.
    Select options
  • Compare

    IP230A: Analog Output Module, 16-bit D/A

    • 4 or 8 voltage output channels
    • Individual D/A converters on each channel
    • 10µS settling time
    • Selectable output range (±5V, ±10V, 0-10V)
    IP230A modules have a 16-bit D/A converter (DAC) to provide highly-accurate analog voltage outputs.
    Select options
  • Compare

    IP231: Analog Output Module, 16-bit D/A

    • 8 or 16 voltage output channels
    • Independent D/A converter on each channel
    • 13µS settling time
    • ±10V output range
    The IP231 outputs analog voltage signals to drive up to 16 devices.
    Select options
  • Compare

    IP235A: Analog Output Module, 16-bit D/A w/RAM Buffer

    • 8 voltage output channels
    • Individual D/A converters on each channel
    • 10µS settling time
    • Selectable output range (±5V, ±10V, 0-10V)
    IP235A modules have a 16-bit D/A converter (DAC) to provide highly-accurate analog voltage outputs.
    Select options
  • Compare

    IP236A-8 16-bit D/A Analog Output with FIFO Buffers

    End of Life. Consult factory for alternative solutions.
    • 8 voltage output channels
    • Individual 16-bit D/A converter on each channel
    • Individual clock on each channel supporting rates of up to 100KHz
    • FIFO memory buffers (128 samples/channel)
    IP236A-8 modules have 16-bit D/A converters (DAC) to provide highly-accurate analog voltage outputs.  
    Select options
  • Compare

    IP320A: Analog Input Module, 12-bit A/D

    • 20 differential or 40 single-ended input channels
    • 200KHz throughput
    • 4.5µS/conversion
    • Selectable input range (±5V, ±10V, 0-10V)
    The IP320A monitors 20 differential or 40 single-ended input channels.
    Select options
  • Compare

    IP330A: Analog Input Module, 16-bit A/D

    • 16 differential or 32 single-ended input channels
    • 200KHz throughput
    • 5µS/conversion
    • Selectable input range (±5V, ±10V, 0-5V, 0-10V)
    IP330A Industrial I/O Pack (IP) modules provide fast, high-resolution A/D conversion.
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems