The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 20 results

  • Compare

    AVME9660A: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • 50-pin front panel header connectors
    • Supports two interrupt channels per IP
    • Standard IP module interface
    The AVME9660A is a non-intelligent slave board that interfaces Industry Pack (IP) modules to the VMEbus.
    Select options
  • Compare

    AcPC8625A: Nonintelligent 6U cPCI IP Carrier Card

    • Four IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8625A is a nonintelligent slave board that interfaces four IP modules to the CompactPCI (cPCI) bus.
    Select options
  • Compare

    AcPC8630A: Nonintelligent 3U cPCI IP Carrier, Front I/O

    • Two IP module slots
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8630A is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.  
    Select options
  • Compare

    AcPC8635A: Nonintelligent 3U cPCI IP Carrier Board, Rear I/O

    • Two IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8635A is a non-intelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.
    Select options
  • Compare

    APC-PMC: Non-intelligent PMC Carrier Card

    • Half-length PCI card
    • Holds one PMC card
    • 32-bit 66 MHz PCI interface
    This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard PCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the PCI card slot edge connector.
    Select options
  • Compare

    APC8620A: Non-intelligent PCI Bus Carrier for IP Modules

    • Holds five IP modules
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system.
    Select options
  • Compare

    APC8621A: Non-intelligent PCI Bus Carrier, Half-Length

    • Nonintelligent PCI bus carrier
    • Holds three IP modules
    • Plug-and-play carrier configuration and interrupt support
    • Two interrupt channels per IP module
    • Supervisory circuit reset generation
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. The half-length card is ideal for use in smaller PC chassis.
    Select options
  • Compare

    APCe8650: Non-intelligent PCI Express Bus Carrier

    • Non-intelligent PCIe bus carrier
    • Holds four IP modules
    • Plug-and-play carrier configuration and interrupt (MSI and INTA#) support
    • Two interrupt channels per IP module
    • Supervisory circuit reset generation
    This board interfaces standard Industry Pack (IP) mezzanine modules to a PCI Express bus on a PC-based computer system.
    Select options
  • Compare

    AVME9668: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • Front panel SCSI-2 connectors
    • Supports 8MHz and 32MHz IP clocks
    • Supports two interrupt channels per IP
    Consult factory for long-term availability. The AVME9668 is a non-intelligent slave board that interfaces IP modules to the VMEbus.
    Select options
  • Compare

    AVME967xA: VME64 Carriers with Optional Geographical Addressing

    • Non-intelligent VME64x IP carrier
    • Holds two or four IP modules
    • VME64 high-density rear connectors
    • Geographical or user-defined addressing
    The AVME9670A and AVME9675A are non-intelligent slave boards that interface up to four IP modules to the VMEbus.
    Select options
  • Compare

    IP220A: Analog Output Industry Pack Module, 12-bit D/A

    • 8 or 16 voltage output channels
    • Independent D/A converter on each channel
    • 11µS settling time
    • ±10V output range
    The IP220A outputs analog voltage signals to drive up to 16 devices.
    Select options
  • Compare

    IP230A: Analog Output Module, 16-bit D/A

    • 4 or 8 voltage output channels
    • Individual D/A converters on each channel
    • 10µS settling time
    • Selectable output range (±5V, ±10V, 0-10V)
    IP230A modules have a 16-bit D/A converter (DAC) to provide highly-accurate analog voltage outputs.
    Select options
  • Compare

    IP231: Analog Output Module, 16-bit D/A

    • 8 or 16 voltage output channels
    • Independent D/A converter on each channel
    • 13µS settling time
    • ±10V output range
    The IP231 outputs analog voltage signals to drive up to 16 devices.
    Select options
  • Compare

    IP235A: Analog Output Module, 16-bit D/A w/RAM Buffer

    • 8 voltage output channels
    • Individual D/A converters on each channel
    • 10µS settling time
    • Selectable output range (±5V, ±10V, 0-10V)
    IP235A modules have a 16-bit D/A converter (DAC) to provide highly-accurate analog voltage outputs.
    Select options
  • Compare

    IP236A-8 16-bit D/A Analog Output with FIFO Buffers

    End of Life. Consult factory for alternative solutions.
    • 8 voltage output channels
    • Individual 16-bit D/A converter on each channel
    • Individual clock on each channel supporting rates of up to 100KHz
    • FIFO memory buffers (128 samples/channel)
    IP236A-8 modules have 16-bit D/A converters (DAC) to provide highly-accurate analog voltage outputs.  
    Select options
  • Compare

    IP320A: Analog Input Module, 12-bit A/D

    • 20 differential or 40 single-ended input channels
    • 200KHz throughput
    • 4.5µS/conversion
    • Selectable input range (±5V, ±10V, 0-10V)
    The IP320A monitors 20 differential or 40 single-ended input channels.
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems