The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 25 results

  • Compare

    AVME9660A: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • 50-pin front panel header connectors
    • Supports two interrupt channels per IP
    • Standard IP module interface
    The AVME9660A is a non-intelligent slave board that interfaces Industry Pack (IP) modules to the VMEbus.
    Select options
  • Compare

    AP500: Quad Serial RS232 Communication Module

    • Four RS232 serial ports
    • Extended temperature
    • PCIe Bus interface
    The AP500 modules provide four asynchronous serial communication interfaces for your system. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. Full signal support for modem control is also included. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Select options
  • Compare

    AP512: Quad Isolated Serial RS422b/485 Communication Module

    • Four isolated full duplex RS422b serial ports (supports RS485)
    • Extended temperature
    • PCIe Bus interface
    AP512 modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP512.
    Select options
  • Compare

    AP513: Quad Isolated Serial RS232 Communication Module

    • Four Isolated RS232 Serial Ports
    • Extended Temperature
    • PCIe Bus Interface
    These modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Select options
  • Compare

    AP520: Octal Serial RS232 Communication Module

    • Eight RS232 serial ports
    • Extended temperature
    • PCIe Bus interface
    The AP520 modules provide eight asynchronous serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP520 Series.
    Select options
  • Compare

    AP522: Octal Serial RS422/485 Communication Module

    • Eight RS422/485 serial ports
    • Extended temperature
    • PCIe Bus interface
    These modules provide eight asynchronous serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Select options
  • Compare

    AP560A: Isolated CAN Bus Interface Module

    • Four CAN bus channels with isolation
    • CAN 2.0A/B
    • ARINC 825
    • CANaerospace
    AP560A modules provide four independent CAN bus interface channels. Each channel has a Holt H13111 CAN controller with an ADM3053 transceiver. The advantage of this design is that it has the ability to transmit, receive and perform message filtering on extended and standard messages. Click here to watch a short video highlighting the features of Acromag’s Acropack Series.
    Select options
  • Compare

    AP570: MIL-STD-1553 Communication Module

    • One dual redundant MIL-STD-1553 channel
    • Extended temperature
    • PCIe bus interface
    AP570 modules provide a dual redundant MIL-STD-1553 channel with four open/ground avionics level ( 35V) discrete I/O signals in addition to IRIG-B input and Trigger I/O. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Read more
  • Compare

    AP580: 1Gb Ethernet with Optional Power over Ethernet Module

    • 1Gb Ethernet
    • Optional Power Over Ethernet
    • PCIe bus interface
    The AP580E-POE-LF offers an option which makes the AP580E a power sourcing equipment device (PSE) that provides 52V DC up to 10 watts of power to powered devices (PD) such as a video camera and VOIP phones or any other PD device. Click here to watch a video highlighting AcroPack features.
    Select options
  • Compare

    AVME9668: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • Front panel SCSI-2 connectors
    • Supports 8MHz and 32MHz IP clocks
    • Supports two interrupt channels per IP
    Consult factory for long-term availability. The AVME9668 is a non-intelligent slave board that interfaces IP modules to the VMEbus.
    Select options
  • Compare

    AVME967xA: VME64 Carriers with Optional Geographical Addressing

    • Non-intelligent VME64x IP carrier
    • Holds two or four IP modules
    • VME64 high-density rear connectors
    • Geographical or user-defined addressing
    The AVME9670A and AVME9675A are non-intelligent slave boards that interface up to four IP modules to the VMEbus.
    Select options
  • Compare

    IP480: Counter/Timer Module

    • Two or six 16-bit (one or three 32-bit) counter/timer channels
    • Event counter
    • Output waveform generator
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    • Interrupt support
    Consult factory for long-term availability.    
    Select options
  • Compare

    XMC-7A CC: User-Configurable Conduction-Cooled Artix-7 FPGA Modules

    • Logic-optimized Artix-7 FPGA.
    • XMC module with PCIe interface
    • Conduction-Cooled
    XMC-7A200CC modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options
  • Compare

    XMC-7A: User-Configurable Artix-7 FPGA Modules with Plug-In I/O

    • Logic-optimized Artix-7 FPGA
    • XMC module with PCIe interface
    • I/O Extension Mezzanine Modules
    Acromag’s XMC-7A modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.  
    Select options
  • Compare

    XMC-7A50-AP323: XMC Module with Artix 7 FPGA and High-Density I/O

    • Reconfigurable AMD Artixâ„¢ 7 FPGA
    • 48 Digital I/O
    • 20 Diff or 40 SE Analog Inputs
    • 16-bit ADC
    The XMC-7A50-AP323 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express. These XMC boards feature a best-in-class Artix 7 interface to deliver the industry’s lowest power and high performance.
    Select options
  • Compare

    XMC-7AWP: User-Configurable Artix-7 FPGA Modules

    • Logic-optimized Artix-7 FPGA
    • XMC module with PCIe interface
    • Write-protected flash
    Acromag’s XMC-7AWP modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems