The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 24 results

  • Compare

    AcPC730: Multifunction 3U cPCI Board

    • 16D/32SE analog inputs, 16-bit A/D
    • Eight analog outputs, 16-bit D/A
    • 16 TTL digital I/O
    • One 32-bit counter/timer
    Consult factory for long-term availability. AcPC730 I/O boards provide a variety of I/O functions on a single card. These high-density boards perform both high-speed and high-resolution A/D and D/A conversion and also handle digital I/O plus counter/timer functions.
    Select options
  • Compare

    AP408: High Voltage Digital Input/Output Module

    • 32 Digital I/O Channels
    • High impedance
    • PCIe Bus Interface
    The AP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output. Click here to watch a short video highlighting the features of the Acromag AP408.
    Select options
  • Compare

    AP418: High Voltage Digital Input/Output Modules

    • 16 digital I/O channels
    • High impedance
    • Extended temperature
    • PCIe Bus Interface
    The AP418 monitors or controls the on/off (high/low) status of up to 16 devices. Each channel can be used as an input or output. Click here to watch a short video highlighting the features of the Acromag AP418.
    Select options
  • Compare

    AP441: Isolated Digital Input with Interrupts Module

    • 32 isolated digital input channels
    • Extended temperature: -40 to 85°C
    • PCIe bus interface
    AP441 modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels. Click here to watch a short video highlighting the features of the AP441.
    Select options
  • Compare

    AP445: Isolated Digital Output Module

    • 32 bipolar solid-state relays
    • 0 to ±60V DC or AC voltage input
    • Extended temperature
    • PCIe Bus Interface
    AP445 modules provide 32 isolated solid-state relay outputs to safely control discrete devices. Click here to watch a short video highlighting the features of the Acromag AP445.
    Select options
  • Compare

    AP471: TTL Level Digital I/O

    • 48 bidirectional input/output channels
    • Digital I/O
    • Wide temperature range
    • PCIe Bus interface
    The AP471 provides 48 general-purpose, bidirectional I/O points to economically monitor and control a large quantity of digital devices. Click here to watch a short video highlighting the features of the Acromag AP471.
    Select options
  • Compare

    APC482: PCI Counter/Timer with Quadrature

    • Ten 16-bit counter/timers, TTL
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    APC483: PCI Counter/Timer with Quadrature Board

    • Four 16-bit TTL counters and four 32-bit RS422 counters
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    APC484: PCI Counter/Timer with Quadrature Board

    • Six 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)

    • Up to 48 TTL or 24 differential RS485
    • Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
    This series of plug-in mezzanine modules provides a user-customizable Altera® Cyclone II FPGA on an Industry Pack (IP) module.  
    Select options
  • Compare

    IP480: Counter/Timer Module

    • Two or six 16-bit (one or three 32-bit) counter/timer channels
    • Event counter
    • Output waveform generator
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    • Interrupt support
    Consult factory for long-term availability.    
    Select options
  • Compare

    VPX6600-BSP-VXW: Board Support Package

    • VxWorks board support package
    Select options
  • Compare

    XMC-7A CC: User-Configurable Conduction-Cooled Artix-7 FPGA Modules

    • Logic-optimized Artix-7 FPGA.
    • XMC module with PCIe interface
    • Conduction-Cooled
    XMC-7A200CC modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options
  • Compare

    XMC-7A: User-Configurable Artix-7 FPGA Modules with Plug-In I/O

    • Logic-optimized Artix-7 FPGA
    • XMC module with PCIe interface
    • I/O Extension Mezzanine Modules
    Acromag’s XMC-7A modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.  
    Select options
  • Compare

    XMC-7A50-AP323: XMC Module with Artix 7 FPGA and High-Density I/O

    • Reconfigurable AMD Artixâ„¢ 7 FPGA
    • 48 Digital I/O
    • 20 Diff or 40 SE Analog Inputs
    • 16-bit ADC
    The XMC-7A50-AP323 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express. These XMC boards feature a best-in-class Artix 7 interface to deliver the industry’s lowest power and high performance.
    Select options
  • Compare

    XMC-7AWP: User-Configurable Artix-7 FPGA Modules

    • Logic-optimized Artix-7 FPGA
    • XMC module with PCIe interface
    • Write-protected flash
    Acromag’s XMC-7AWP modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems