The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 30 results

  • Compare

    AVME9660A: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • 50-pin front panel header connectors
    • Supports two interrupt channels per IP
    • Standard IP module interface
    The AVME9660A is a non-intelligent slave board that interfaces Industry Pack (IP) modules to the VMEbus.
    Select options
  • Compare

    AP408: High Voltage Digital Input/Output Module

    • 32 Digital I/O Channels
    • High impedance
    • PCIe Bus Interface
    The AP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output. Click here to watch a short video highlighting the features of the Acromag AP408.
    Select options
  • Compare

    AP418: High Voltage Digital Input/Output Modules

    • 16 digital I/O channels
    • High impedance
    • Extended temperature
    • PCIe Bus Interface
    The AP418 monitors or controls the on/off (high/low) status of up to 16 devices. Each channel can be used as an input or output. Click here to watch a short video highlighting the features of the Acromag AP418.
    Select options
  • Compare

    AP441: Isolated Digital Input with Interrupts Module

    • 32 isolated digital input channels
    • Extended temperature: -40 to 85°C
    • PCIe bus interface
    AP441 modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels. Click here to watch a short video highlighting the features of the AP441.
    Select options
  • Compare

    AP445: Isolated Digital Output Module

    • 32 bipolar solid-state relays
    • 0 to ±60V DC or AC voltage input
    • Extended temperature
    • PCIe Bus Interface
    AP445 modules provide 32 isolated solid-state relay outputs to safely control discrete devices. Click here to watch a short video highlighting the features of the Acromag AP445.
    Select options
  • Compare

    AP471: TTL Level Digital I/O

    • 48 bidirectional input/output channels
    • Digital I/O
    • Wide temperature range
    • PCIe Bus interface
    The AP471 provides 48 general-purpose, bidirectional I/O points to economically monitor and control a large quantity of digital devices. Click here to watch a short video highlighting the features of the Acromag AP471.
    Select options
  • Compare

    AVME9668: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • Front panel SCSI-2 connectors
    • Supports 8MHz and 32MHz IP clocks
    • Supports two interrupt channels per IP
    Consult factory for long-term availability. The AVME9668 is a non-intelligent slave board that interfaces IP modules to the VMEbus.
    Select options
  • Compare

    AVME967xA: VME64 Carriers with Optional Geographical Addressing

    • Non-intelligent VME64x IP carrier
    • Holds two or four IP modules
    • VME64 high-density rear connectors
    • Geographical or user-defined addressing
    The AVME9670A and AVME9675A are non-intelligent slave boards that interface up to four IP modules to the VMEbus.
    Select options
  • Compare

    IP400: Digital Input Module, High Voltage Inputs

    • 40 input channels
    • 0-60V DC input range
    • Change-of-state/level interrupts (up to 12 channels)
    The IP400 can monitor the on/off (high/low) status of up to 40 devices.
    Select options
  • Compare

    IP405: Digital Output Module, High Voltage Outputs

    • 40 low-side switch output channels
    • 0-60V DC output range
    • High output current (up to 1A per channel)
    The IP405 controls up to 40 low-side switches (open-drain MOSFETs).    
    Select options
  • Compare

    IP408: Digital Input/Output Module, High Voltage I/O

    • 32 bi-directional digital input and/or output channels
    • 0-60V DC input and output range
    • Low-side output switches
    • Outputs sink up to 1A per channel
    • Change-of-state and level interrupts (up to 8 channels)
    The IP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output.
    Select options
  • Compare

    IP409: Digital Input/Output Module, Differential I/O

    • 24 differential digital input and/or output channels
    • Ruggedized RS-422A/485 transceivers
    • Interrupt support on all channels (change-of-state and high or low level transition)
    The IP409 provides 24 differential I/O channels with interrupts. Each channel is programmable as an input or an output on a bit basis, in any combination.
    Select options
  • Compare

    IP440A: Digital Input Module, Isolated

    • 32 port-isolated input channels
    • ±60V AC/DC input (three ranges)
    • Interrupt support for each channel
    IP440A Industrial I/O Pack (IP) modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels.
    Select options
  • Compare

    IP445A: Digital Output Module, Isolated

    • 32 port-isolated output channels (bipolar solid state relays)
    • ±60V AC/DC output
    • High/low-side switch configuration
    IP445A modules provide 32 isolated solid-state relay outputs to safely control discrete devices.
    Select options
  • Compare

    IP470A: Digital Output Module, TTL Level

    • 48 bi-directional input/output channels
    • TTL-compatible inputs
    • CMOS-compatible open-drain outputs
    • Interrupt support for each channel
    IP470A Industrial I/O Pack (IP) modules provide 48 general-purpose, bidirectional I/O points to economically monitor and control a large quantity of digital devices.
    Select options
  • Compare

    IP480: Counter/Timer Module

    • Two or six 16-bit (one or three 32-bit) counter/timer channels
    • Event counter
    • Output waveform generator
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    • Interrupt support
    Consult factory for long-term availability.    
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems