The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 19 results

  • Compare

    APC-PMC: Non-intelligent PMC Carrier Card

    • Half-length PCI card
    • Holds one PMC card
    • 32-bit 66 MHz PCI interface
    This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard PCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the PCI card slot edge connector.
    Select options
  • Compare

    APC8620A: Non-intelligent PCI Bus Carrier for IP Modules

    • Holds five IP modules
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system.
    Select options
  • Compare

    APC8621A: Non-intelligent PCI Bus Carrier, Half-Length

    • Nonintelligent PCI bus carrier
    • Holds three IP modules
    • Plug-and-play carrier configuration and interrupt support
    • Two interrupt channels per IP module
    • Supervisory circuit reset generation
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. The half-length card is ideal for use in smaller PC chassis.
    Select options
  • Compare

    IP480: Counter/Timer Module

    • Two or six 16-bit (one or three 32-bit) counter/timer channels
    • Event counter
    • Output waveform generator
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    • Interrupt support
    Consult factory for long-term availability.    
    Select options
  • Compare

    PMC408: Digital Input/Output Module, High Voltage I/O

    Consult factory for long-term availability.
    • 32 bi-directional digital inputs and/or outputs
    • 0-60V DC input and output range
    • Low-side output switches
    • Outputs sink up to 1A per channel
    • Change-of-state and level interrupts  (up to 8 channels)
    Select options
  • Compare

    PMC424: Digital Input/Output Module, Differential, TTL, Counter/Timer

    • 24 differential I/O, 16 TTL I/O
    • Four 16-bit counter/timer channels,  six operating modes
    • Change of state and level interrupts
    The PMC424 digital I/O module provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multi-function counter/timers.
    Select options
  • Compare

    PMC464: Digital I/O Module, Counter/Timer

    Consult factory for long-term availability.
    • 64 TTL bi-directional I/O
    • Four 16-bit counter/timer channels with six operating modes
    • Change of state and level interrupts
    Select options
  • Compare

    XMC-7A CC: User-Configurable Conduction-Cooled Artix-7 FPGA Modules

    • Logic-optimized Artix-7 FPGA.
    • XMC module with PCIe interface
    • Conduction-Cooled
    XMC-7A200CC modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options
  • Compare

    XMC-7A: User-Configurable Artix-7 FPGA Modules with Plug-In I/O

    • Logic-optimized Artix-7 FPGA
    • XMC module with PCIe interface
    • I/O Extension Mezzanine Modules
    Acromag’s XMC-7A modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.  
    Select options
  • Compare

    XMC-7A50-AP323: XMC Module with Artix 7 FPGA and High-Density I/O

    • Reconfigurable AMD Artixâ„¢ 7 FPGA
    • 48 Digital I/O
    • 20 Diff or 40 SE Analog Inputs
    • 16-bit ADC
    The XMC-7A50-AP323 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express. These XMC boards feature a best-in-class Artix 7 interface to deliver the industry’s lowest power and high performance.
    Select options
  • Compare

    XMC-7AWP: User-Configurable Artix-7 FPGA Modules

    • Logic-optimized Artix-7 FPGA
    • XMC module with PCIe interface
    • Write-protected flash
    Acromag’s XMC-7AWP modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options
  • Compare

    XMC-7K AX: User-Configurable AMD Kintex 7 FPGA Modules with Plug-In I/O

    • Logic-optimized AMD Kintex 7 FPGA
    • XMC module with PCIe interface
    • I/O Extension Mezzanine Modules
    XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options
  • Compare

    XMC-7K CC: User-Configurable Conduction-Cooled AMD Kintex 7 FPGA Modules

    • Logic-optimized AMD Kintex 7 FPGA
    • XMC module with PCIe interface
    • Conduction-Cooled
    Acromag’s XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options
  • Compare

    XMC-7K F: User-Configurable AMD Kintex 7 FPGA Modules with Dual SFP+ Ports

    • XMC module with PCIe & SFP+/AMD Aurora interface
    • Logic-optimized AMD Kintex 7 FPGA
    • 10-Gigabit Ethernet
    Acromag’s XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial interface. The logic-optimized FPGA is well-suited for a broad range of applications.
    Select options
  • Compare

    XMC-7KWP: User-Configurable Kintex-7 FPGA Modules with Dual SFP+ Ports

    • XMC module
    • Kintex-7 FPGA
    • 10-Gigabit Ethernet
    • Write-protected flash
    Acromag’s XMC-7KWP modules feature a high performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high throughput serial interface.
    Select options
  • Compare

    XMC-SLX: User-Configurable Spartan-6 FPGA Modules with Plug-In I/O

    • XMC-SLX150: 147,433 logic cells (XC6SLX150)
    • XMC module with PCIe Interface
    • Logic-optimized Spartan-6 FPGA
    • I/O Extension Mezzanine Modules
    Acromag’s cost-effective XMC-SLX modules feature a user-configurable Xilinx® Spartan®-6 FPGA enhanced with high-speed memory and a high-throughput PCIe interface.      
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems