Showing 1–16 of 27 results
-
AcPC482: Counter/Timer with Quadrature
- Ten 16-bit counter/timers, TTL
- Event counter
- Frequency measurement
- Quadrature position measurement
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
-
AcPC483: Counter/Timer with Quadrature
- Four 16-bit counters - TTL, and four 32-bit counters - RS422
- Event counter
- Frequency measurement
- Quadrature position measurement
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
-
AcPC484: Counter/Timer with Quadrature
- Six 32-bit counters - RS422
- Event counter
- Frequency measurement
- Quadrature position measurement
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
-
ACPS3310: 3U CPCI® Serial Carrier Card for AcroPack Modules
- Front I/O access
- Two isolated I/O expansion slots (AcroPack® or mPCIe)
-
ACPS3320: 3U cPCI® Serial Carrier Card for AcroPack Modules
- Rear I/O access
- Two I/O expansion slots (AcroPack or mPCIe)
-
APC424: PCI Digital I/O (differential & TTL) and Counter/Timers
- 40 I/O channels: 24 differential and 16 TTL
- Four 16-bit or two 32-bit counter/timers
-
APC464: PCI Digital I/O (TTL) and Counter/Timers
- 64 TTL digital input/output channels
- Four 16-bit or two 32-bit counter/timer channels
- Six operating modes
- TTL-compatible thresholds
-
APCe8675: Non-intelligent carrier card
- 8-lane PCI Express interface
- Holds one XMC module
-
APCe8775: PCI Express Carrier Card for XMC Modules
- One XMC mezzanine module slot
- 3/4-length
- Non-Intelligent carrier card
- PCIe x8 interface
-
IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)
- Up to 48 TTL or 24 differential RS485
- Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
-
IP220A: Analog Output Industry Pack Module, 12-bit D/A
- 8 or 16 voltage output channels
- Independent D/A converter on each channel
- 11µS settling time
- ±10V output range
-
IP230A: Analog Output Module, 16-bit D/A
- 4 or 8 voltage output channels
- Individual D/A converters on each channel
- 10µS settling time
- Selectable output range (±5V, ±10V, 0-10V)
-
IP231: Analog Output Module, 16-bit D/A
- 8 or 16 voltage output channels
- Independent D/A converter on each channel
- 13µS settling time
- ±10V output range
-
IP235A: Analog Output Module, 16-bit D/A w/RAM Buffer
- 8 voltage output channels
- Individual D/A converters on each channel
- 10µS settling time
- Selectable output range (±5V, ±10V, 0-10V)
-
IP236A-8 16-bit D/A Analog Output with FIFO Buffers
End of Life. Consult factory for alternative solutions.- 8 voltage output channels
- Individual 16-bit D/A converter on each channel
- Individual clock on each channel supporting rates of up to 100KHz
- FIFO memory buffers (128 samples/channel)
-
IP320A: Analog Input Module, 12-bit A/D
- 20 differential or 40 single-ended input channels
- 200KHz throughput
- 4.5µS/conversion
- Selectable input range (±5V, ±10V, 0-10V)
Embedded I/O Processing Solutions
Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.
Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.
Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.