The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 24 results

  • Compare

    AcPC482: Counter/Timer with Quadrature

    • Ten 16-bit counter/timers, TTL
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    AcPC483: Counter/Timer with Quadrature

    • Four 16-bit counters - TTL, and four 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    AcPC484: Counter/Timer with Quadrature

    • Six 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    ACPS3310: 3U CPCI® Serial Carrier Card for AcroPack Modules

    • Front I/O access
    • Two isolated I/O expansion slots (AcroPack® or mPCIe)
    The ACPS3310 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    ACPS3320: 3U cPCI® Serial Carrier Card for AcroPack Modules

    • Rear I/O access
    • Two I/O expansion slots (AcroPack or mPCIe)
    The ACPS3320 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    APCe8675: Non-intelligent carrier card

    • 8-lane PCI Express interface
    • Holds one XMC module
    The APCe8675 is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted XMC module. It simply acts as an adapter to route signals between the system’s PCIe bus and the XMC module connector.
    Select options
  • Compare

    APCe8775: PCI Express Carrier Card for XMC Modules

    • One XMC mezzanine module slot
    • 3/4-length
    • Non-Intelligent carrier card
    • PCIe x8 interface
    Acromag’s APCe8775 carrier card interfaces an XMC mezzanine module to a PCI Express bus in a PC-based desktop computer system.
    Select options
  • Compare

    IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)

    • Up to 48 TTL or 24 differential RS485
    • Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
    This series of plug-in mezzanine modules provides a user-customizable Altera® Cyclone II FPGA on an Industry Pack (IP) module.  
    Select options
  • Compare

    IP400: Digital Input Module, High Voltage Inputs

    • 40 input channels
    • 0-60V DC input range
    • Change-of-state/level interrupts (up to 12 channels)
    The IP400 can monitor the on/off (high/low) status of up to 40 devices.
    Select options
  • Compare

    IP405: Digital Output Module, High Voltage Outputs

    • 40 low-side switch output channels
    • 0-60V DC output range
    • High output current (up to 1A per channel)
    The IP405 controls up to 40 low-side switches (open-drain MOSFETs).    
    Select options
  • Compare

    IP408: Digital Input/Output Module, High Voltage I/O

    • 32 bi-directional digital input and/or output channels
    • 0-60V DC input and output range
    • Low-side output switches
    • Outputs sink up to 1A per channel
    • Change-of-state and level interrupts (up to 8 channels)
    The IP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output.
    Select options
  • Compare

    IP409: Digital Input/Output Module, Differential I/O

    • 24 differential digital input and/or output channels
    • Ruggedized RS-422A/485 transceivers
    • Interrupt support on all channels (change-of-state and high or low level transition)
    The IP409 provides 24 differential I/O channels with interrupts. Each channel is programmable as an input or an output on a bit basis, in any combination.
    Select options
  • Compare

    IP440A: Digital Input Module, Isolated

    • 32 port-isolated input channels
    • ±60V AC/DC input (three ranges)
    • Interrupt support for each channel
    IP440A Industrial I/O Pack (IP) modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels.
    Select options
  • Compare

    IP445A: Digital Output Module, Isolated

    • 32 port-isolated output channels (bipolar solid state relays)
    • ±60V AC/DC output
    • High/low-side switch configuration
    IP445A modules provide 32 isolated solid-state relay outputs to safely control discrete devices.
    Select options
  • Compare

    IP470A: Digital Output Module, TTL Level

    • 48 bi-directional input/output channels
    • TTL-compatible inputs
    • CMOS-compatible open-drain outputs
    • Interrupt support for each channel
    IP470A Industrial I/O Pack (IP) modules provide 48 general-purpose, bidirectional I/O points to economically monitor and control a large quantity of digital devices.
    Select options
  • Compare

    IP480: Counter/Timer Module

    • Two or six 16-bit (one or three 32-bit) counter/timer channels
    • Event counter
    • Output waveform generator
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    • Interrupt support
    Consult factory for long-term availability.    
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems