The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 21 results

  • Compare

    AcPC730: Multifunction 3U cPCI Board

    • 16D/32SE analog inputs, 16-bit A/D
    • Eight analog outputs, 16-bit D/A
    • 16 TTL digital I/O
    • One 32-bit counter/timer
    Consult factory for long-term availability. AcPC730 I/O boards provide a variety of I/O functions on a single card. These high-density boards perform both high-speed and high-resolution A/D and D/A conversion and also handle digital I/O plus counter/timer functions.
    Select options
  • Compare

    AcPC8625A: Nonintelligent 6U cPCI IP Carrier Card

    • Four IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8625A is a nonintelligent slave board that interfaces four IP modules to the CompactPCI (cPCI) bus.
    Select options
  • Compare

    AcPC8630A: Nonintelligent 3U cPCI IP Carrier, Front I/O

    • Two IP module slots
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8630A is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.  
    Select options
  • Compare

    AcPC8635A: Nonintelligent 3U cPCI IP Carrier Board, Rear I/O

    • Two IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8635A is a non-intelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.
    Select options
  • Compare

    ACPS3310: 3U CPCI® Serial Carrier Card for AcroPack Modules

    • Front I/O access
    • Two isolated I/O expansion slots (AcroPack® or mPCIe)
    The ACPS3310 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    ACPS3320: 3U cPCI® Serial Carrier Card for AcroPack Modules

    • Rear I/O access
    • Two I/O expansion slots (AcroPack or mPCIe)
    The ACPS3320 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    IP-EP-EDK: Engineering Design Kit

    • CD containing
      • schematics
      • parts list
      • part location drawing
      • example VHDL source
      • other utility files.
    • One kit required
    Select options
  • Compare

    IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)

    • Up to 48 TTL or 24 differential RS485
    • Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
    This series of plug-in mezzanine modules provides a user-customizable Altera® Cyclone II FPGA on an Industry Pack (IP) module.  
    Select options
  • Compare

    IP400: Digital Input Module, High Voltage Inputs

    • 40 input channels
    • 0-60V DC input range
    • Change-of-state/level interrupts (up to 12 channels)
    The IP400 can monitor the on/off (high/low) status of up to 40 devices.
    Select options
  • Compare

    IP405: Digital Output Module, High Voltage Outputs

    • 40 low-side switch output channels
    • 0-60V DC output range
    • High output current (up to 1A per channel)
    The IP405 controls up to 40 low-side switches (open-drain MOSFETs).    
    Select options
  • Compare

    IP408: Digital Input/Output Module, High Voltage I/O

    • 32 bi-directional digital input and/or output channels
    • 0-60V DC input and output range
    • Low-side output switches
    • Outputs sink up to 1A per channel
    • Change-of-state and level interrupts (up to 8 channels)
    The IP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output.
    Select options
  • Compare

    IP409: Digital Input/Output Module, Differential I/O

    • 24 differential digital input and/or output channels
    • Ruggedized RS-422A/485 transceivers
    • Interrupt support on all channels (change-of-state and high or low level transition)
    The IP409 provides 24 differential I/O channels with interrupts. Each channel is programmable as an input or an output on a bit basis, in any combination.
    Select options
  • Compare

    IP440A: Digital Input Module, Isolated

    • 32 port-isolated input channels
    • ±60V AC/DC input (three ranges)
    • Interrupt support for each channel
    IP440A Industrial I/O Pack (IP) modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels.
    Select options
  • Compare

    IP445A: Digital Output Module, Isolated

    • 32 port-isolated output channels (bipolar solid state relays)
    • ±60V AC/DC output
    • High/low-side switch configuration
    IP445A modules provide 32 isolated solid-state relay outputs to safely control discrete devices.
    Select options
  • Compare

    IP470A: Digital Output Module, TTL Level

    • 48 bi-directional input/output channels
    • TTL-compatible inputs
    • CMOS-compatible open-drain outputs
    • Interrupt support for each channel
    IP470A Industrial I/O Pack (IP) modules provide 48 general-purpose, bidirectional I/O points to economically monitor and control a large quantity of digital devices.
    Select options
  • Compare

    IPSW: I/O Function Routines for VxWorks, Windows, Linux

    • Use with IndustryPack modules/carriers
    • Easy installation procedure
    • Help files with step-by-step instructions
    • Demonstration Program
    • Driver level support for desktop and embedded Windows level programming environments
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems