The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 24 results

  • Compare

    IP500A: Serial Communication, 232 Industry Pack Module

    • Four asynchronous EIA/TIA-232E serial ports
    • 16-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 128Kbps)
    Select options
  • Compare

    IP560: CAN Bus Interface Industry Pack Modules

    • Two CAN bus channels with optional isolation
    • NXP SJA1000 CAN controller with TJA1043 transceiver
    Select options
  • Compare

    IP570: MIL-STD-1553 Bus Interface Modules

    • One or two 1553 interface channels
    • DDC Micro-ACE controls 1553 interface
    Select options
  • Compare

    AP500: Quad Serial RS232 Communication Module

    • Four RS232 serial ports
    • Extended temperature
    • PCIe Bus interface
    The AP500 modules provide four asynchronous serial communication interfaces for your system. Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. Full signal support for modem control is also included. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Select options
  • Compare

    AP512: Quad Isolated Serial RS422b/485 Communication Module

    • Four isolated full duplex RS422b serial ports (supports RS485)
    • Extended temperature
    • PCIe Bus interface
    AP512 modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP512.
    Select options
  • Compare

    AP513: Quad Isolated Serial RS232 Communication Module

    • Four Isolated RS232 Serial Ports
    • Extended Temperature
    • PCIe Bus Interface
    These modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Select options
  • Compare

    AP520: Octal Serial RS232 Communication Module

    • Eight RS232 serial ports
    • Extended temperature
    • PCIe Bus interface
    The AP520 modules provide eight asynchronous serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP520 Series.
    Select options
  • Compare

    AP522: Octal Serial RS422/485 Communication Module

    • Eight RS422/485 serial ports
    • Extended temperature
    • PCIe Bus interface
    These modules provide eight asynchronous serial communication ports from a single AP carrier slot for a high-density solution. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Select options
  • Compare

    AP560A: Isolated CAN Bus Interface Module

    • Four CAN bus channels with isolation
    • CAN 2.0A/B
    • ARINC 825
    • CANaerospace
    AP560A modules provide four independent CAN bus interface channels. Each channel has a Holt H13111 CAN controller with an ADM3053 transceiver. The advantage of this design is that it has the ability to transmit, receive and perform message filtering on extended and standard messages. Click here to watch a short video highlighting the features of Acromag’s Acropack Series.
    Select options
  • Compare

    AP570: MIL-STD-1553 Communication Module

    • One dual redundant MIL-STD-1553 channel
    • Extended temperature
    • PCIe bus interface
    AP570 modules provide a dual redundant MIL-STD-1553 channel with four open/ground avionics level ( 35V) discrete I/O signals in addition to IRIG-B input and Trigger I/O. Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
    Read more
  • Compare

    AP580: 1Gb Ethernet with Optional Power over Ethernet Module

    • 1Gb Ethernet
    • Optional Power Over Ethernet
    • PCIe bus interface
    The AP580E-POE-LF offers an option which makes the AP580E a power sourcing equipment device (PSE) that provides 52V DC up to 10 watts of power to powered devices (PD) such as a video camera and VOIP phones or any other PD device. Click here to watch a video highlighting AcroPack features.
    Select options
  • Compare

    AXM-A30: Analog Input Extension I/O Module for PMC FPGAs

    • High-Speed Analog Input
    • Two Differential Channels
    • Two 16-bit A/D Channels
    These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), and PMC-VLX/VSX/ VFX (Virtex-5 FPGA) modules.
    Select options
  • Compare

    AXM-A75: Multi-function I/O for PMC & XMC FPGAs

    • 16 analog inputs, simultaneous A/D
    • 8 analog outputs, simultaneous D/A
    • 16 digital I/O channels
    The AXM-75 is a multi-function I/O module that adds A/D, D/A, and digital I/O signal processing functions to an FPGA board. These extension I/O modules plug directly onto many Acromag reconfigurable FPGA cards equipped with an AXM mezzanine connector.
    Select options
  • Compare

    AXM-D Series: Digital I/O Extension Modules for PMC & XMC FPGAs

    • Plug-In I/O Modules
    • Choose from four I/O Options
    • JTAG Support Option
    These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), PMC-VLX/VSX/VFX (Virtex-5 FPGA) modules, and PMC-SLX (Spartan-6 FPGA) modules.
    Select options
  • Compare

    AXM-Z01: Peripheral I/O Extension Modules for XMC FPGAs

    • Gigabit ethernet over copper wire 1000BASE-T from the Zynq PS
    • USB 3.0 from the Zynq PS
    • USB-UART from the Zynq PS provides a debug terminal port
    • Mini Display Port from the Zynq PS
    AXM module with RJ45 Gigabit Ethernet, USB 3.0, mini DisplayPort, and USB UART mini-B ports.
    Select options
  • Compare

    IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)

    • Up to 48 TTL or 24 differential RS485
    • Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
    This series of plug-in mezzanine modules provides a user-customizable Altera® Cyclone II FPGA on an Industry Pack (IP) module.  
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems