Showing 1–16 of 25 results
-
IP500A: Serial Communication, 232 Industry Pack Module
- Four asynchronous EIA/TIA-232E serial ports
- 16-byte FIFO buffers
- Interrupt support
- Programmable baud rate (up to 128Kbps)
-
IP560: CAN Bus Interface Industry Pack Modules
- Two CAN bus channels with optional isolation
- NXP SJA1000 CAN controller with TJA1043 transceiver
-
IP570: MIL-STD-1553 Bus Interface Modules
- One or two 1553 interface channels
- DDC Micro-ACE controls 1553 interface
-
AcPC424: Digital Input/Output Module Differential, TTL, Counter/Timer
- 24 differential I/O, 16 TTL I/O
- Four 16-bit counter/timer channels with six operating modes
-
AcPC464: Digital Input/Output and Counter/Timer
- 64 digital input/output channels
- 16-bit counter/timer channels with six operating modes
- Change of state and level interrupts.
-
IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)
- Up to 48 TTL or 24 differential RS485
- Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
-
IP220A: Analog Output Industry Pack Module, 12-bit D/A
- 8 or 16 voltage output channels
- Independent D/A converter on each channel
- 11µS settling time
- ±10V output range
-
IP230A: Analog Output Module, 16-bit D/A
- 4 or 8 voltage output channels
- Individual D/A converters on each channel
- 10µS settling time
- Selectable output range (±5V, ±10V, 0-10V)
-
IP231: Analog Output Module, 16-bit D/A
- 8 or 16 voltage output channels
- Independent D/A converter on each channel
- 13µS settling time
- ±10V output range
-
IP235A: Analog Output Module, 16-bit D/A w/RAM Buffer
- 8 voltage output channels
- Individual D/A converters on each channel
- 10µS settling time
- Selectable output range (±5V, ±10V, 0-10V)
-
IP236A-8 16-bit D/A Analog Output with FIFO Buffers
End of Life. Consult factory for alternative solutions.- 8 voltage output channels
- Individual 16-bit D/A converter on each channel
- Individual clock on each channel supporting rates of up to 100KHz
- FIFO memory buffers (128 samples/channel)
-
IP320A: Analog Input Module, 12-bit A/D
- 20 differential or 40 single-ended input channels
- 200KHz throughput
- 4.5µS/conversion
- Selectable input range (±5V, ±10V, 0-10V)
-
IP330A: Analog Input Module, 16-bit A/D
- 16 differential or 32 single-ended input channels
- 200KHz throughput
- 5µS/conversion
- Selectable input range (±5V, ±10V, 0-5V, 0-10V)
-
IP340: Analog Input Module, Simultaneous Sample & Hold
- 16 differential inputs (two 8-channel groups)
- 12 or 14-bit A/D
- 125KHz throughput
- 8µS conversion time for 8-channel group
- 512 sample FIFO buffer, ±10V input range
-
IP480: Counter/Timer Module
- Two or six 16-bit (one or three 32-bit) counter/timer channels
- Event counter
- Output waveform generator
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
- Interrupt support
-
IP501: Serial Communication, 422/485 Full Duplex Industry Pack Module
End of Life. Consult factory for alternative solutions.- Four asynchronous EIA/TIA-422B (EIA-485) serial ports
- FIFO buffers (16 or 64-byte)
- Interrupt support
- Programmable baud rate (up to 512Kbps)
Embedded I/O Processing Solutions
Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.
Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.
Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.