Showing 1–16 of 27 results
-
IP500A: Serial Communication, 232 Industry Pack Module
- Four asynchronous EIA/TIA-232E serial ports
- 16-byte FIFO buffers
- Interrupt support
- Programmable baud rate (up to 128Kbps)
-
IP560: CAN Bus Interface Industry Pack Modules
- Two CAN bus channels with optional isolation
- NXP SJA1000 CAN controller with TJA1043 transceiver
-
IP570: MIL-STD-1553 Bus Interface Modules
- One or two 1553 interface channels
- DDC Micro-ACE controls 1553 interface
-
AcPC482: Counter/Timer with Quadrature
- Ten 16-bit counter/timers, TTL
- Event counter
- Frequency measurement
- Quadrature position measurement
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
-
AcPC483: Counter/Timer with Quadrature
- Four 16-bit counters - TTL, and four 32-bit counters - RS422
- Event counter
- Frequency measurement
- Quadrature position measurement
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
-
AcPC484: Counter/Timer with Quadrature
- Six 32-bit counters - RS422
- Event counter
- Frequency measurement
- Quadrature position measurement
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
-
ACPS3310: 3U CPCI® Serial Carrier Card for AcroPack Modules
- Front I/O access
- Two isolated I/O expansion slots (AcroPack® or mPCIe)
-
ACPS3320: 3U cPCI® Serial Carrier Card for AcroPack Modules
- Rear I/O access
- Two I/O expansion slots (AcroPack or mPCIe)
-
APCe8675: Non-intelligent carrier card
- 8-lane PCI Express interface
- Holds one XMC module
-
APCe8775: PCI Express Carrier Card for XMC Modules
- One XMC mezzanine module slot
- 3/4-length
- Non-Intelligent carrier card
- PCIe x8 interface
-
IP480: Counter/Timer Module
- Two or six 16-bit (one or three 32-bit) counter/timer channels
- Event counter
- Output waveform generator
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
- Interrupt support
-
IP501: Serial Communication, 422/485 Full Duplex Industry Pack Module
End of Life. Consult factory for alternative solutions.- Four asynchronous EIA/TIA-422B (EIA-485) serial ports
- FIFO buffers (16 or 64-byte)
- Interrupt support
- Programmable baud rate (up to 512Kbps)
-
IP502: Serial Communication, 485 Half-Duplex Industry Pack Modules
- Four asynchronous EIA-485 serial ports
- 16-byte FIFO buffers
- Interrupt support
- Programmable baud rate (up to 512Kbps)
-
IP511: Serial Communication, 422 Isolated Industry Pack Module
- Four asynchronous EIA/TIA-422B isolated serial ports
- 16 or 64-byte FIFO buffers
- Interrupt support
- Programmable baud rate (up to 512Kbps)
-
IP512: Serial Communication, 485 Isolated Industry Pack Module
- Four asynchronous EIA-485 isolated serial ports
- 16 or 64-byte FIFO buffers
- Interrupt support
- Programmable baud rate (up to 512Kbps)
-
IP520: Serial Communication, 232 Octal Industry Pack Module
- Eight asynchronous EIA/TIA-232E serial ports
- 64-byte FIFO buffers
- Interrupt support
- Programmable baud rate (up to 230Kbps)
Embedded I/O Processing Solutions
Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.
Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.
Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.