The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing all 16 results

  • Compare

    ACEX-4600-EDK: Engineering Design Kit

    The ACEX-4600-EDK is an engineering development kit to be used with the ACEX-4620/ACEX-4610 Type 6 COM Express Carrier boards. It provides access to all Type 6 COM Express peripherals via industry standard connectors.
    Select options
  • Compare

    APA7-EDK: Engineering Design Kit

    • CD containing
      • schematics
      • parts list
      • part location drawing
      • example VHDL source
      • other utility files.
    • One kit required
    Click here to watch a short video highlighting the features of Acromag’s APA7-500 Series.
    Select options
  • Compare

    APC-PMC: Non-intelligent PMC Carrier Card

    • Half-length PCI card
    • Holds one PMC card
    • 32-bit 66 MHz PCI interface
    This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard PCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the PCI card slot edge connector.
    Select options
  • Compare

    APC8620A: Non-intelligent PCI Bus Carrier for IP Modules

    • Holds five IP modules
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system.
    Select options
  • Compare

    APC8621A: Non-intelligent PCI Bus Carrier, Half-Length

    • Nonintelligent PCI bus carrier
    • Holds three IP modules
    • Plug-and-play carrier configuration and interrupt support
    • Two interrupt channels per IP module
    • Supervisory circuit reset generation
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. The half-length card is ideal for use in smaller PC chassis.
    Select options
  • Compare

    APSW-API: I/O Function Routines for VxWorks, Windows, Linux

    • Programming interface with function routines for AcroPack modules/carriers.
    • Customizable for other operating systems.
    Select options
  • Compare

    APZU-EDK: Engineering Design Kit

    Acromag’s Engineering Design Kit (EDK) provides an FPGA generated firmware example design that provides host access to the hardware digital I/O on the APZU module. The example is implemented using the Xilinx Vivado® development environment and offers a starting point from which customers can develop their customized applications.
    • CD containing
      • schematics
      • parts list
      • part location drawing
      • example Vivado and Vitis project files
      • other utility files.
    • One kit required
     
    Select options
  • Compare

    Fans & Cooling

    • Fans for use in air-cooled applications
    • Conduction-cooled kits
    • Heatsinks
    Select options
  • Compare

    Hardware

    • Conduction cooling kit
    • Front panels
    • MIL-STD power filter
    Select options
  • Compare

    IP480: Counter/Timer Module

    • Two or six 16-bit (one or three 32-bit) counter/timer channels
    • Event counter
    • Output waveform generator
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    • Interrupt support
    Consult factory for long-term availability.    
    Select options
  • Compare

    PMC408: Digital Input/Output Module, High Voltage I/O

    Consult factory for long-term availability.
    • 32 bi-directional digital inputs and/or outputs
    • 0-60V DC input and output range
    • Low-side output switches
    • Outputs sink up to 1A per channel
    • Change-of-state and level interrupts  (up to 8 channels)
    Select options
  • Compare

    PMC424: Digital Input/Output Module, Differential, TTL, Counter/Timer

    • 24 differential I/O, 16 TTL I/O
    • Four 16-bit counter/timer channels,  six operating modes
    • Change of state and level interrupts
    The PMC424 digital I/O module provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multi-function counter/timers.
    Select options
  • Compare

    PMC464: Digital I/O Module, Counter/Timer

    Consult factory for long-term availability.
    • 64 TTL bi-directional I/O
    • Four 16-bit counter/timer channels with six operating modes
    • Change of state and level interrupts
    Select options
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    Select options
  • Compare

    XCOM-6400-BSP-VXW: Board Support Package

    • The VxWorks 7® Board Support Package (BSP) is a comprehensive package that simplifies the process of developing application for Acromag for the XCOM-6400 series hardware using VxWorks Work Bench.
       
    Select options
  • Compare

    IP482 / IP483 / IP484: Counter/Timer Module

    • Ten 16-bit-TTL (482)
    • Five 16-bit-TTL and two 16-bit-RS422 (483)
    • Five 16-bit-RS422 counter/timer channels (484)
    • 8 or 32MHz clock time base
    Consult factory for long-term availability.  
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems