The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 30 results

  • Compare

    ACEX-4600-EDK: Engineering Design Kit

    The ACEX-4600-EDK is an engineering development kit to be used with the ACEX-4620/ACEX-4610 Type 6 COM Express Carrier boards. It provides access to all Type 6 COM Express peripherals via industry standard connectors.
    Select options
  • Compare

    AcPC8625A: Nonintelligent 6U cPCI IP Carrier Card

    • Four IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8625A is a nonintelligent slave board that interfaces four IP modules to the CompactPCI (cPCI) bus.
    Select options
  • Compare

    AcPC8630A: Nonintelligent 3U cPCI IP Carrier, Front I/O

    • Two IP module slots
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8630A is a nonintelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.  
    Select options
  • Compare

    AcPC8635A: Nonintelligent 3U cPCI IP Carrier Board, Rear I/O

    • Two IP module slots
    • Rear access I/O
    • Plug-and-play carrier configuration and interrupt support
    The AcPC8635A is a non-intelligent slave board that interfaces two IP modules to the CompactPCI® (cPCI) bus.
    Select options
  • Compare

    ACPS3310: 3U CPCI® Serial Carrier Card for AcroPack Modules

    • Front I/O access
    • Two isolated I/O expansion slots (AcroPack® or mPCIe)
    The ACPS3310 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    ACPS3320: 3U cPCI® Serial Carrier Card for AcroPack Modules

    • Rear I/O access
    • Two I/O expansion slots (AcroPack or mPCIe)
    The ACPS3320 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    APC482: PCI Counter/Timer with Quadrature

    • Ten 16-bit counter/timers, TTL
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    APC483: PCI Counter/Timer with Quadrature Board

    • Four 16-bit TTL counters and four 32-bit RS422 counters
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    APC484: PCI Counter/Timer with Quadrature Board

    • Six 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    Fans & Cooling

    • Fans for use in air-cooled applications
    • Conduction-cooled kits
    • Heatsinks
    Select options
  • Compare

    Hardware

    • Conduction cooling kit
    • Front panels
    • MIL-STD power filter
    Select options
  • Compare

    IP-EP-EDK: Engineering Design Kit

    • CD containing
      • schematics
      • parts list
      • part location drawing
      • example VHDL source
      • other utility files.
    • One kit required
    Select options
  • Compare

    IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)

    • Up to 48 TTL or 24 differential RS485
    • Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
    This series of plug-in mezzanine modules provides a user-customizable Altera® Cyclone II FPGA on an Industry Pack (IP) module.  
    Select options
  • Compare

    IP400: Digital Input Module, High Voltage Inputs

    • 40 input channels
    • 0-60V DC input range
    • Change-of-state/level interrupts (up to 12 channels)
    The IP400 can monitor the on/off (high/low) status of up to 40 devices.
    Select options
  • Compare

    IP405: Digital Output Module, High Voltage Outputs

    • 40 low-side switch output channels
    • 0-60V DC output range
    • High output current (up to 1A per channel)
    The IP405 controls up to 40 low-side switches (open-drain MOSFETs).    
    Select options
  • Compare

    IP408: Digital Input/Output Module, High Voltage I/O

    • 32 bi-directional digital input and/or output channels
    • 0-60V DC input and output range
    • Low-side output switches
    • Outputs sink up to 1A per channel
    • Change-of-state and level interrupts (up to 8 channels)
    The IP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output.
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems