Showing 1–16 of 26 results
-
AcPC330: Analog Input CompactPCI Board
- 16D/32SE input channels
- ±5V, ±10V, 0-5V, and 0-10V input ranges
- 16-bit A/D converter, 8µS conversion time (125KHz)
-
AcPC341: Analog Input CompactPCI Board, Simultaneous Conversion
- 16 differential inputs
- ±10V DC input range
- Eight 14-bit A/D converters with simultaneous sample and hold
- 8µS conversion time for 8-channel bank
-
AcPC482: Counter/Timer with Quadrature
- Ten 16-bit counter/timers, TTL
- Event counter
- Frequency measurement
- Quadrature position measurement
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
-
AcPC483: Counter/Timer with Quadrature
- Four 16-bit counters - TTL, and four 32-bit counters - RS422
- Event counter
- Frequency measurement
- Quadrature position measurement
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
-
AcPC484: Counter/Timer with Quadrature
- Six 32-bit counters - RS422
- Event counter
- Frequency measurement
- Quadrature position measurement
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
-
IP480: Counter/Timer Module
- Two or six 16-bit (one or three 32-bit) counter/timer channels
- Event counter
- Output waveform generator
- Pulse-width or periodic rate monitor
- Watchdog timer with isolated relay output
- Interrupt support
-
PMC-VFX: User-configurable Virtex-5 FPGA with Plug-in I/O
- LVDS and Plug-In I/O Modules
- XC5VFX70T FPGA: 71K logic cells and PowerPC 440 32-bit RISC core
-
PMC-VLX: User-configurable Virtex-5 FPGA with plug-in I/O
- 64 LVDS I/O and plug-In I/O modules
- XC5VLX85T/110T/155T FPGA, up to 155K logic cells, 128 DSP48E slices
-
PMC-VSX: User-configurable Virtex-5 FPGA with plug-in I/O
- LVDS I/O and plug-In I/O modules
- XC5VSX95T FPGA with 94K logic cells and 640 DSP48E slices
-
PMC230A: 16-Bit D/A Analog Output
- Independent D/A converters on each channel
- 10µS settling time
- Three output ranges
-
PMC330: Analog Input Module, 16-bit A/D
- 16 differential or 32 single-ended inputs
- 125KHz throughput
- 8µS/conversion
- Selectable input range (±5V, ±10V, 0-5V, 0-10V)
-
PMC341: Analog Input Module, Simultaneous Sample & Hold
- 16 differential inputs (two 8-channel groups)
- Eight 14-bit A/D
- 125KHz throughput
- 8µS conversion time for 8-channel group
- 512 sample FIFO buffer
- ±10V input range
-
XMC-7A CC: User-Configurable Conduction-Cooled Artix-7 FPGA Modules
- Logic-optimized Artix-7 FPGA.
- XMC module with PCIe interface
- Conduction-Cooled
-
XMC-7A: User-Configurable Artix-7 FPGA Modules with Plug-In I/O
- Logic-optimized Artix-7 FPGA
- XMC module with PCIe interface
- I/O Extension Mezzanine Modules
-
XMC-7A50-AP323: XMC Module with Artix 7 FPGA and High-Density I/O
- Reconfigurable AMD Artixâ„¢ 7 FPGA
- 48 Digital I/O
- 20 Diff or 40 SE Analog Inputs
- 16-bit ADC
-
XMC-7AWP: User-Configurable Artix-7 FPGA Modules
- Logic-optimized Artix-7 FPGA
- XMC module with PCIe interface
- Write-protected flash
Embedded I/O Processing Solutions
Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.
Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.
Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.