Home » Embedded I/O & Processing Solutions
The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 19 results

  • Compare
    Compare

    AVME9660A: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • 50-pin front panel header connectors
    • Supports two interrupt channels per IP
    • Standard IP module interface
    The AVME9660A is a non-intelligent slave board that interfaces Industry Pack (IP) modules to the VMEbus.
    Select options
  • Compare
    Compare

    AcPC330: Analog Input CompactPCI Board

    • 16D/32SE input channels
    • ±5V, ±10V, 0-5V, and 0-10V input ranges
    • 16-bit A/D converter, 8µS conversion time (125KHz)
    AcPC330 boards provide fast, high resolution A/D conversion.
    Select options
  • Compare
    Compare

    AcPC341: Analog Input CompactPCI Board, Simultaneous Conversion

    • 16 differential inputs
    • ±10V DC input range
    • Eight 14-bit A/D converters with simultaneous sample and hold
    • 8µS conversion time for 8-channel bank
    AcPC341 boards provide fast, high resolution, simultaneous A/D conversion of eight channels.
    Select options
  • Compare
    Compare

    AcPC482: Counter/Timer with Quadrature

    • Ten 16-bit counter/timers, TTL
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare
    Compare

    AcPC483: Counter/Timer with Quadrature

    • Four 16-bit counters - TTL, and four 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare
    Compare

    AcPC484: Counter/Timer with Quadrature

    • Six 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare
    Compare

    AVME9668: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • Front panel SCSI-2 connectors
    • Supports 8MHz and 32MHz IP clocks
    • Supports two interrupt channels per IP
    Consult factory for long-term availability. The AVME9668 is a non-intelligent slave board that interfaces IP modules to the VMEbus.
    Select options
  • Compare
    Compare

    AVME967xA: VME64 Carriers with Optional Geographical Addressing

    • Non-intelligent VME64x IP carrier
    • Holds two or four IP modules
    • VME64 high-density rear connectors
    • Geographical or user-defined addressing
    The AVME9670A and AVME9675A are non-intelligent slave boards that interface up to four IP modules to the VMEbus.
    Select options
  • Compare
    Compare

    IP480: Counter/Timer Module

    • Two or six 16-bit (one or three 32-bit) counter/timer channels
    • Event counter
    • Output waveform generator
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    • Interrupt support
    Consult factory for long-term availability.    
    Select options
  • Compare
    Compare

    PMC-VFX: User-configurable Virtex-5 FPGA with Plug-in I/O

    • LVDS and Plug-In I/O Modules
    • XC5VFX70T FPGA: 71K logic cells and PowerPC 440 32-bit RISC core
    Acromag’s PMC-VFX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules. Click here to watch a video explaining more about FPGAs.
    Select options
  • Compare
    Compare

    PMC-VLX: User-configurable Virtex-5 FPGA with plug-in I/O

    • 64 LVDS I/O and plug-In I/O modules
    • XC5VLX85T/110T/155T FPGA, up to 155K logic cells, 128 DSP48E slices
    Acromag’s PMC-VLX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules.
    Select options
  • Compare
    Compare

    PMC-VSX: User-configurable Virtex-5 FPGA with plug-in I/O

    • LVDS I/O and plug-In I/O modules
    • XC5VSX95T FPGA with 94K logic cells and 640 DSP48E slices
    Acromag’s PMC-VSX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules.
    Select options
  • Compare
    Compare

    PMC230A: 16-Bit D/A Analog Output

    • Independent D/A converters on each channel
    • 10µS settling time
    • Three output ranges
    Consult factory for long-term availability. Eight 16-bit D/A converter (DACs) to provide highly-accurate analog voltage outputs. A unique two-piece board design brings the proven reliability of Acromag’s IndustryPack® (IP) A/D modules to a PMC format. An IP230A module is embedded on a PMC interface card that maintains maximum performance and transparent communication to the host.
    Select options
  • Compare
    Compare

    PMC330: Analog Input Module, 16-bit A/D

    • 16 differential or 32 single-ended inputs
    • 125KHz throughput
    • 8µS/conversion
    • Selectable input range (±5V, ±10V, 0-5V, 0-10V)
    Many features to improve your overall system throughput rate. You can scan all channels or define a subset for more frequent sampling. Burst mode scans selected channels at the maximum conversion rate. Uniform mode performs conversions at user-defined intervals. Both modes can scan continuously, or execute a single cycle upon receiving a trigger.
    Select options
  • Compare
    Compare

    PMC341: Analog Input Module, Simultaneous Sample & Hold

    • 16 differential inputs (two 8-channel groups)
    • Eight 14-bit A/D
    • 125KHz throughput
    • 8µS conversion time for 8-channel group
    • 512 sample FIFO buffer
    • ±10V input range
    Sixteen analog inputs which are sampled as two eight-channel banks. Eight A/D converters (ADCs) permit simultaneous conversion of all eight channels in a bank.
    Select options
  • Compare
    Compare

    IP482 / IP483 / IP484: Counter/Timer Module

    • Ten 16-bit-TTL (482)
    • Five 16-bit-TTL and two 16-bit-RS422 (483)
    • Five 16-bit-RS422 counter/timer channels (484)
    • 8 or 32MHz clock time base
    Consult factory for long-term availability.  
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems