The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing all 14 results

  • Compare

    IP500A: Serial Communication, 232 Industry Pack Module

    • Four asynchronous EIA/TIA-232E serial ports
    • 16-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 128Kbps)
    Select options
  • Compare

    IP560: CAN Bus Interface Industry Pack Modules

    • Two CAN bus channels with optional isolation
    • NXP SJA1000 CAN controller with TJA1043 transceiver
    Select options
  • Compare

    IP570: MIL-STD-1553 Bus Interface Modules

    • One or two 1553 interface channels
    • DDC Micro-ACE controls 1553 interface
    Select options
  • Compare

    AP730: Multi-function I/O

    • Analog input
    • Analog output
    • Digital I/O
    • Counter/timers
    • PCIe Bus Interface
    AP730 mezzanine modules provide a variety of I/O functions on a single plug-in card. These new high-density modules perform both high-speed and high resolution A/D and D/A conversion. They also handle digital I/O and counter/timer functions. Click here to watch this short AcroMaggie video that highlights the AP730.
    Select options
  • Compare

    APC-PMC: Non-intelligent PMC Carrier Card

    • Half-length PCI card
    • Holds one PMC card
    • 32-bit 66 MHz PCI interface
    This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard PCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the PCI card slot edge connector.
    Select options
  • Compare

    APC8620A: Non-intelligent PCI Bus Carrier for IP Modules

    • Holds five IP modules
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system.
    Select options
  • Compare

    APC8621A: Non-intelligent PCI Bus Carrier, Half-Length

    • Nonintelligent PCI bus carrier
    • Holds three IP modules
    • Plug-and-play carrier configuration and interrupt support
    • Two interrupt channels per IP module
    • Supervisory circuit reset generation
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. The half-length card is ideal for use in smaller PC chassis.
    Select options
  • Compare

    IP501: Serial Communication, 422/485 Full Duplex Industry Pack Module

    End of Life. Consult factory for alternative solutions.
    • Four asynchronous EIA/TIA-422B (EIA-485) serial ports
    • FIFO buffers (16 or 64-byte)
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Select options
  • Compare

    IP502: Serial Communication, 485 Half-Duplex Industry Pack Modules

    • Four asynchronous EIA-485 serial ports
    • 16-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Consult factory for long-term availability.
    Select options
  • Compare

    IP511: Serial Communication, 422 Isolated Industry Pack Module

    • Four asynchronous EIA/TIA-422B isolated serial ports
    • 16 or 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Consult factory for long-term availability.
    Select options
  • Compare

    IP512: Serial Communication, 485 Isolated Industry Pack Module

    • Four asynchronous EIA-485 isolated serial ports
    • 16 or 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Consult factory for long-term availability.
    Select options
  • Compare

    IP520: Serial Communication, 232 Octal Industry Pack Module

    • Eight asynchronous EIA/TIA-232E serial ports
    • 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 230Kbps)
    Consult factory for long-term availability.
    Select options
  • Compare

    IP521: Serial Communication, 422/485 Octal Industry Pack Module

    • Eight asynchronous full duplex EIA/TIA-422B serial ports (supports EIA-485)
    • 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 921.6bps)
    Consult factory for long-term availability.
    Select options
  • Compare

    XVPX-9756: 3U VPX bootable SATA/SAS drive module

    • Connect as SATA/SAS drive OR via the PCIe interface
    • Supports dual slim SATA drives or a single 2.5" drive (rotating or solid state)
    • RAID 0/1 configurable with dual slim SATA drives
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems