The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 18 results

  • Compare

    IP500A: Serial Communication, 232 Industry Pack Module

    • Four asynchronous EIA/TIA-232E serial ports
    • 16-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 128Kbps)
    Select options
  • Compare

    IP560: CAN Bus Interface Industry Pack Modules

    • Two CAN bus channels with optional isolation
    • NXP SJA1000 CAN controller with TJA1043 transceiver
    Select options
  • Compare

    IP570: MIL-STD-1553 Bus Interface Modules

    • One or two 1553 interface channels
    • DDC Micro-ACE controls 1553 interface
    Select options
  • Compare

    AP730: Multi-function I/O

    • Analog input
    • Analog output
    • Digital I/O
    • Counter/timers
    • PCIe Bus Interface
    AP730 mezzanine modules provide a variety of I/O functions on a single plug-in card. These new high-density modules perform both high-speed and high resolution A/D and D/A conversion. They also handle digital I/O and counter/timer functions. Click here to watch this short AcroMaggie video that highlights the AP730.
    Select options
  • Compare

    APCe8675: Non-intelligent carrier card

    • 8-lane PCI Express interface
    • Holds one XMC module
    The APCe8675 is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted XMC module. It simply acts as an adapter to route signals between the system’s PCIe bus and the XMC module connector.
    Select options
  • Compare

    APCe8775: PCI Express Carrier Card for XMC Modules

    • One XMC mezzanine module slot
    • 3/4-length
    • Non-Intelligent carrier card
    • PCIe x8 interface
    Acromag’s APCe8775 carrier card interfaces an XMC mezzanine module to a PCI Express bus in a PC-based desktop computer system.
    Select options
  • Compare

    IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)

    • Up to 48 TTL or 24 differential RS485
    • Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
    This series of plug-in mezzanine modules provides a user-customizable Altera® Cyclone II FPGA on an Industry Pack (IP) module.  
    Select options
  • Compare

    IP501: Serial Communication, 422/485 Full Duplex Industry Pack Module

    End of Life. Consult factory for alternative solutions.
    • Four asynchronous EIA/TIA-422B (EIA-485) serial ports
    • FIFO buffers (16 or 64-byte)
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Select options
  • Compare

    IP502: Serial Communication, 485 Half-Duplex Industry Pack Modules

    • Four asynchronous EIA-485 serial ports
    • 16-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Consult factory for long-term availability.
    Select options
  • Compare

    IP511: Serial Communication, 422 Isolated Industry Pack Module

    • Four asynchronous EIA/TIA-422B isolated serial ports
    • 16 or 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Consult factory for long-term availability.
    Select options
  • Compare

    IP512: Serial Communication, 485 Isolated Industry Pack Module

    • Four asynchronous EIA-485 isolated serial ports
    • 16 or 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 512Kbps)
    Consult factory for long-term availability.
    Select options
  • Compare

    IP520: Serial Communication, 232 Octal Industry Pack Module

    • Eight asynchronous EIA/TIA-232E serial ports
    • 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 230Kbps)
    Consult factory for long-term availability.
    Select options
  • Compare

    IP521: Serial Communication, 422/485 Octal Industry Pack Module

    • Eight asynchronous full duplex EIA/TIA-422B serial ports (supports EIA-485)
    • 64-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 921.6bps)
    Consult factory for long-term availability.
    Select options
  • Compare

    VPX4812A / VPX4814A: VPX Carrier Cards for XMC Modules

    • Air-cooled, conduction-cooled and REDI versions
    • 3U Single XMC slot
    • PCIe x8 Gen 2 interface
    The VPX4812A can be used as a VPX switch card allowing a host CPU to communicate with up to 3 downstream cards in addition to the XMC card. Each VPX port can be configured to be x4 or x8. The VPX4814A is a peripheral XMC carrier board designed to be used in a system that uses a VPX AcroExpress® CPU.  
    Select options
  • Compare

    VPX4821A: VPX Carrier Cards for XMC or PMC Modules

    • Air-cooled and conduction-cooled versions
    • 6U dual PMC/XMC slots
    • PCIe bus 16-lane Gen 1 or 2 interface switch on data plane
    The VPX4821A carrier card provides a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system. Connect to the OpenVPXâ„¢ via Data plane for a direct PCIe connection over the VPX backplane. This allows host processors access to a high-performance, low latency interconnect to the PMC and XMC modules on the carrier card.
    Select options
  • Compare

    VPX4840 Series: 6U VPX Carrier Cards for XMC Modules

    • Two XMC slots
    • PCIe x16 Gen 3 interface via Expansion or Data plane
    • Air or Conduction-cooled
    • Supports the Jn6 differential signals and legacy I/O from Jn4
    The VPX4840 carrier cards provide a simple and cost-effective solution for interfacing an XMC module to a VPX computer system. They offer host processors low latency access to the XMC modules through high-speed interconnects on the carrier card.
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems