The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 32 results

  • Compare

    AP408: High Voltage Digital Input/Output Module

    • 32 Digital I/O Channels
    • High impedance
    • PCIe Bus Interface
    The AP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output. Click here to watch a short video highlighting the features of the Acromag AP408.
    Select options
  • Compare

    AP418: High Voltage Digital Input/Output Modules

    • 16 digital I/O channels
    • High impedance
    • Extended temperature
    • PCIe Bus Interface
    The AP418 monitors or controls the on/off (high/low) status of up to 16 devices. Each channel can be used as an input or output. Click here to watch a short video highlighting the features of the Acromag AP418.
    Select options
  • Compare

    AP441: Isolated Digital Input with Interrupts Module

    • 32 isolated digital input channels
    • Extended temperature: -40 to 85°C
    • PCIe bus interface
    AP441 modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels. Click here to watch a short video highlighting the features of the AP441.
    Select options
  • Compare

    AP445: Isolated Digital Output Module

    • 32 bipolar solid-state relays
    • 0 to ±60V DC or AC voltage input
    • Extended temperature
    • PCIe Bus Interface
    AP445 modules provide 32 isolated solid-state relay outputs to safely control discrete devices. Click here to watch a short video highlighting the features of the Acromag AP445.
    Select options
  • Compare

    AP471: TTL Level Digital I/O

    • 48 bidirectional input/output channels
    • Digital I/O
    • Wide temperature range
    • PCIe Bus interface
    The AP471 provides 48 general-purpose, bidirectional I/O points to economically monitor and control a large quantity of digital devices. Click here to watch a short video highlighting the features of the Acromag AP471.
    Select options
  • Compare

    APA7-500: Reconfigurable Xilinx® Artix®-7 FPGA Module

    • 52,160 logic cells
    • Reconfigurable Xilinx Artix-7 FPGA
    • PCI Express bus interface
    • Conduction or air cooled
    The APA7-500 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express.

    Click here to watch a short video highlighting the features of Acromag’s APA7-500 Series.

    Select options
  • Compare

    APC-PMC: Non-intelligent PMC Carrier Card

    • Half-length PCI card
    • Holds one PMC card
    • 32-bit 66 MHz PCI interface
    This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard PCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the PCI card slot edge connector.
    Select options
  • Compare

    APC8620A: Non-intelligent PCI Bus Carrier for IP Modules

    • Holds five IP modules
    • Front access I/O
    • Plug-and-play carrier configuration and interrupt support
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system.
    Select options
  • Compare

    APC8621A: Non-intelligent PCI Bus Carrier, Half-Length

    • Nonintelligent PCI bus carrier
    • Holds three IP modules
    • Plug-and-play carrier configuration and interrupt support
    • Two interrupt channels per IP module
    • Supervisory circuit reset generation
    This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. The half-length card is ideal for use in smaller PC chassis.
    Select options
  • Compare

    APZU: User-Configurable AMD Zynq® UltraScale+ MPSoC I/O Modules

    • AMD Zynq UltraScale+ MPSoC
    • ARM Cortexâ„¢ A53 & R5 CPUs
    • Programmable logic
    • PCIe Bus Interface
    APZU series modules provide a programmable AMD Zynq UltraScale+ multiprocessor system on a chip (MPSoC). This MPSoC combines a feature-rich ARM-based processing system and programmable logic in a single device. Click here to watch a short video highlighting the features of the APZU Series.
    Select options
  • Compare

    AXM-A30: Analog Input Extension I/O Module for PMC FPGAs

    • High-Speed Analog Input
    • Two Differential Channels
    • Two 16-bit A/D Channels
    These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), and PMC-VLX/VSX/ VFX (Virtex-5 FPGA) modules.
    Select options
  • Compare

    AXM-A75: Multi-function I/O for PMC & XMC FPGAs

    • 16 analog inputs, simultaneous A/D
    • 8 analog outputs, simultaneous D/A
    • 16 digital I/O channels
    The AXM-75 is a multi-function I/O module that adds A/D, D/A, and digital I/O signal processing functions to an FPGA board. These extension I/O modules plug directly onto many Acromag reconfigurable FPGA cards equipped with an AXM mezzanine connector.
    Select options
  • Compare

    AXM-D Series: Digital I/O Extension Modules for PMC & XMC FPGAs

    • Plug-In I/O Modules
    • Choose from four I/O Options
    • JTAG Support Option
    These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), PMC-VLX/VSX/VFX (Virtex-5 FPGA) modules, and PMC-SLX (Spartan-6 FPGA) modules.
    Select options
  • Compare

    AXM-Z01: Peripheral I/O Extension Modules for XMC FPGAs

    • Gigabit ethernet over copper wire 1000BASE-T from the Zynq PS
    • USB 3.0 from the Zynq PS
    • USB-UART from the Zynq PS provides a debug terminal port
    • Mini Display Port from the Zynq PS
    AXM module with RJ45 Gigabit Ethernet, USB 3.0, mini DisplayPort, and USB UART mini-B ports.
    Select options
  • Compare

    CS-IP Conformal Coat

    Industry Pack conformal coat. This option should be selected to prevent high temperature and humidity issues (like blotching) when boards are conformal coated
    Select options
  • Compare

    Embedded Cables

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems