The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 27 results

  • Compare

    AVME9660A: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • 50-pin front panel header connectors
    • Supports two interrupt channels per IP
    • Standard IP module interface
    The AVME9660A is a non-intelligent slave board that interfaces Industry Pack (IP) modules to the VMEbus.
    Select options
  • Compare

    AcPC482: Counter/Timer with Quadrature

    • Ten 16-bit counter/timers, TTL
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    AcPC483: Counter/Timer with Quadrature

    • Four 16-bit counters - TTL, and four 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    AcPC484: Counter/Timer with Quadrature

    • Six 32-bit counters - RS422
    • Event counter
    • Frequency measurement
    • Quadrature position measurement
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    Select options
  • Compare

    ACPS3310: 3U CPCI® Serial Carrier Card for AcroPack Modules

    • Front I/O access
    • Two isolated I/O expansion slots (AcroPack® or mPCIe)
    The ACPS3310 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    ACPS3320: 3U cPCI® Serial Carrier Card for AcroPack Modules

    • Rear I/O access
    • Two I/O expansion slots (AcroPack or mPCIe)
    The ACPS3320 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    APA7-500: Reconfigurable Xilinx® Artix®-7 FPGA Module

    • 52,160 logic cells
    • Reconfigurable Xilinx Artix-7 FPGA
    • PCI Express bus interface
    • Conduction or air cooled
    The APA7-500 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express.

    Click here to watch a short video highlighting the features of Acromag’s APA7-500 Series.

    Select options
  • Compare

    APCe8675: Non-intelligent carrier card

    • 8-lane PCI Express interface
    • Holds one XMC module
    The APCe8675 is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted XMC module. It simply acts as an adapter to route signals between the system’s PCIe bus and the XMC module connector.
    Select options
  • Compare

    APCe8775: PCI Express Carrier Card for XMC Modules

    • One XMC mezzanine module slot
    • 3/4-length
    • Non-Intelligent carrier card
    • PCIe x8 interface
    Acromag’s APCe8775 carrier card interfaces an XMC mezzanine module to a PCI Express bus in a PC-based desktop computer system.
    Select options
  • Compare

    APZU: User-Configurable AMD Zynq® UltraScale+ MPSoC I/O Modules

    • AMD Zynq UltraScale+ MPSoC
    • ARM Cortexâ„¢ A53 & R5 CPUs
    • Programmable logic
    • PCIe Bus Interface
    APZU series modules provide a programmable AMD Zynq UltraScale+ multiprocessor system on a chip (MPSoC). This MPSoC combines a feature-rich ARM-based processing system and programmable logic in a single device. Click here to watch a short video highlighting the features of the APZU Series.
    Select options
  • Compare

    AVME9668: VMEbus 6U Carrier

    • Non-intelligent VME IP carrier
    • Holds four IP modules
    • Front panel SCSI-2 connectors
    • Supports 8MHz and 32MHz IP clocks
    • Supports two interrupt channels per IP
    Consult factory for long-term availability. The AVME9668 is a non-intelligent slave board that interfaces IP modules to the VMEbus.
    Select options
  • Compare

    AVME967xA: VME64 Carriers with Optional Geographical Addressing

    • Non-intelligent VME64x IP carrier
    • Holds two or four IP modules
    • VME64 high-density rear connectors
    • Geographical or user-defined addressing
    The AVME9670A and AVME9675A are non-intelligent slave boards that interface up to four IP modules to the VMEbus.
    Select options
  • Compare

    IP480: Counter/Timer Module

    • Two or six 16-bit (one or three 32-bit) counter/timer channels
    • Event counter
    • Output waveform generator
    • Pulse-width or periodic rate monitor
    • Watchdog timer with isolated relay output
    • Interrupt support
    Consult factory for long-term availability.    
    Select options
  • Compare

    PMC-VFX: User-configurable Virtex-5 FPGA with Plug-in I/O

    • LVDS and Plug-In I/O Modules
    • XC5VFX70T FPGA: 71K logic cells and PowerPC 440 32-bit RISC core
    Acromag’s PMC-VFX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules. Click here to watch a video explaining more about FPGAs.
    Select options
  • Compare

    PMC-VLX: User-configurable Virtex-5 FPGA with plug-in I/O

    • 64 LVDS I/O and plug-In I/O modules
    • XC5VLX85T/110T/155T FPGA, up to 155K logic cells, 128 DSP48E slices
    Acromag’s PMC-VLX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules.
    Select options
  • Compare

    PMC-VSX: User-configurable Virtex-5 FPGA with plug-in I/O

    • LVDS I/O and plug-In I/O modules
    • XC5VSX95T FPGA with 94K logic cells and 640 DSP48E slices
    Acromag’s PMC-VSX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules.
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems