Embedded I/O & Processing Solutions

End of Life. Consult factory for alternative solutions.

• Easy testing & development

For easier testing and development, Acromag offers an engineering development system to streamline your COM Express® system for fast field deployment. The engineering development system is an engineering development board and an ACEX-4610-LF or ACEX-4620-LF COM Express® carrier board mounted to a metal baseplate.

End of Life. Consult factory for alternative solutions.

• Supports Type 6 COM Express module
• Single/dual PMC/XMC sites
• High-density, high-speed connector

Acromag’s ACEX-4600 Type 6 COM Express carrier cards employ a number of key features that are critical for successful use in the rugged environments of defense/industrial applications.

• Mini ITX form factor
• COM Express Type 10 site
• Four I/O expansion slots (AcroPack or MiniPCIe)

The ACEX4040 carrier card allows you to quickly combine a COM Express Type 10 CPU module with a mix of I/O modules for custom computing applications. With its rugged design and compact Mini-ITX form factor, this carrier card is easily mounted in a variety of enclosures for rapid development. Click here to watch a short video highlighting the ACEX4041 features.

• 52,160 logic cells
• Reconfigurable Xilinx Artix-7 FPGA
• PCI Express bus interface
• Conduction or air cooled

The APA7-500 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express.

Click here to watch a short video highlighting the features of Acromag’s APA7-500 Series.

• Half-length PCI card
• Holds one PMC card
• 32-bit 66 MHz PCI interface

This board provides an easy and low cost solution that enables use of a PMC mezzanine I/O module in a standard PCI computer system. The carrier card acts simply as an adapter to route PCI bus signals to and from the PMC module through the PCI card slot edge connector.

• Holds five IP modules
• Front access I/O
• Plug-and-play carrier configuration and interrupt support

This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system.

• Nonintelligent PCI bus carrier
• Holds three IP modules
• Plug-and-play carrier configuration and interrupt support
• Two interrupt channels per IP module
• Supervisory circuit reset generation

This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. The half-length card is ideal for use in smaller PC chassis.

• AMD Zynq UltraScale+ MPSoC
• ARM Cortex™ A53 & R5 CPUs
• Programmable logic
• PCIe Bus Interface

APZU series modules provide a programmable AMD Zynq UltraScale+ multiprocessor system on a chip (MPSoC). This MPSoC combines a feature-rich ARM-based processing system and programmable logic in a single device. Click here to watch a short video highlighting the features of the APZU Series.

• Logic-optimized Artix-7 FPGA.
• XMC module with PCIe interface
• Conduction-Cooled

XMC-7A200CC modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.

• Logic-optimized Artix-7 FPGA
• XMC module with PCIe interface
• I/O Extension Mezzanine Modules

Acromag’s XMC-7A modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.  

• Reconfigurable AMD Artix™ 7 FPGA
• 48 Digital I/O
• 20 Diff or 40 SE Analog Inputs
• 16-bit ADC

The XMC-7A50-AP323 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express. These XMC boards feature a best-in-class Artix 7 interface to deliver the industry’s lowest power and high performance.

• Logic-optimized Artix-7 FPGA
• XMC module with PCIe interface
• Write-protected flash

Acromag’s XMC-7AWP modules feature a high-performance user-configurable Xilinx^® Artix^®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.

• Logic-optimized AMD Kintex 7 FPGA
• XMC module with PCIe interface
• I/O Extension Mezzanine Modules

XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.

• Logic-optimized AMD Kintex 7 FPGA
• XMC module with PCIe interface
• Conduction-Cooled

Acromag’s XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.

• XMC module with PCIe & SFP+/AMD Aurora interface
• Logic-optimized AMD Kintex 7 FPGA
• 10-Gigabit Ethernet

Acromag’s XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial interface. The logic-optimized FPGA is well-suited for a broad range of applications.

• XMC module
• Kintex-7 FPGA
• 10-Gigabit Ethernet
• Write-protected flash

Acromag’s XMC-7KWP modules feature a high performance user-configurable Xilinx® Kintex®-7 FPGA enhanced with high-speed memory and a high throughput serial interface.